diff mbox series

[v15,04/10] dt-bindings: soc: qcom: cpr3: Add bindings for CPR3+ driver

Message ID 20240708-topic-cpr3h-v15-4-5bc8b8936489@linaro.org
State Changes Requested
Headers show
Series Add support for Core Power Reduction v3, v4 and Hardened | expand

Checks

Context Check Description
robh/checkpatch success
robh/patch-applied success
robh/dt-meta-schema fail build log

Commit Message

Konrad Dybcio July 8, 2024, 12:22 p.m. UTC 
From: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>

Add the bindings for the Qualcomm CPR3+ hardware.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
[Konrad: Make binding check pass, some other changes]
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
 .../devicetree/bindings/soc/qcom/qcom,cpr3.yaml    | 286 +++++++++++++++++++++
 1 file changed, 286 insertions(+)

Comments

Rob Herring (Arm) July 8, 2024, 1:47 p.m. UTC | #1 
On Mon, 08 Jul 2024 14:22:35 +0200, Konrad Dybcio wrote:
> From: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
> 
> Add the bindings for the Qualcomm CPR3+ hardware.
> 
> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
> [Konrad: Make binding check pass, some other changes]
> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
> ---
>  .../devicetree/bindings/soc/qcom/qcom,cpr3.yaml    | 286 +++++++++++++++++++++
>  1 file changed, 286 insertions(+)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/soc/qcom/qcom,cpr3.example.dtb: opp-table-cprh: opp-1:qcom,opp-cloop-vadj:0: [0] is too short
	from schema $id: http://devicetree.org/schemas/opp/opp-v2-qcom-level.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/soc/qcom/qcom,cpr3.example.dtb: opp-table-cprh: opp-1:qcom,opp-oloop-vadj:0: [0] is too short
	from schema $id: http://devicetree.org/schemas/opp/opp-v2-qcom-level.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/soc/qcom/qcom,cpr3.example.dtb: opp-table-cprh: opp-2:qcom,opp-cloop-vadj:0: [0] is too short
	from schema $id: http://devicetree.org/schemas/opp/opp-v2-qcom-level.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/soc/qcom/qcom,cpr3.example.dtb: opp-table-cprh: opp-2:qcom,opp-oloop-vadj:0: [0] is too short
	from schema $id: http://devicetree.org/schemas/opp/opp-v2-qcom-level.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/soc/qcom/qcom,cpr3.example.dtb: opp-table-cprh: opp-3:qcom,opp-cloop-vadj:0: [0] is too short
	from schema $id: http://devicetree.org/schemas/opp/opp-v2-qcom-level.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/soc/qcom/qcom,cpr3.example.dtb: opp-table-cprh: opp-3:qcom,opp-oloop-vadj:0: [0] is too short
	from schema $id: http://devicetree.org/schemas/opp/opp-v2-qcom-level.yaml#

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240708-topic-cpr3h-v15-4-5bc8b8936489@linaro.org

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,cpr3.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,cpr3.yaml
new file mode 100644
index 000000000000..2e6712aa1c58
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,cpr3.yaml
@@ -0,0 +1,286 @@ 
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/qcom/qcom,cpr3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Core Power Reduction v3+
+
+description:
+  CPR (Core Power Reduction) is a technology to reduce core power of a CPU
+  (or another device). Each OPP of a device corresponds to a "corner" that
+  has a range of valid voltages for a particular frequency.
+  The CPR monitors dynamic factors such as temperature, etc. and suggests
+  or (in the CPR-hardened case) applies voltage adjustments to save power
+  and meet silicon characteristic requirements for a given chip unit.
+
+maintainers:
+  - Konrad Dybcio <konradybcio@kernel.org>
+
+properties:
+  compatible:
+    oneOf:
+      - const: qcom,cpr3
+      - const: qcom,cpr4
+      - items:
+          - enum:
+              - qcom,msm8998-cprh
+              - qcom,sdm630-cprh
+          - const: qcom,cprh
+
+  reg:
+    items:
+      - description: Register space of the CPR controller0
+      - description: Register space of the CPR controller1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: CPR reference clock
+
+  vdd-supply:
+    description: Autonomous Phase Control (APC) or other power supply
+
+  '#power-domain-cells':
+    const: 1
+
+  qcom,acc:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle to syscon for writing ACC settings
+
+  nvmem-cells:
+    description: Cells containing the fuse corners and revision data
+    maxItems: 32
+
+  nvmem-cell-names:
+    maxItems: 32
+
+  operating-points-v2: true
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - operating-points-v2
+  - "#power-domain-cells"
+  - nvmem-cells
+  - nvmem-cell-names
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8998-cprh
+    then:
+      properties:
+        nvmem-cell-names:
+          items:
+            - const: cpr_speed_bin
+            - const: cpr_fuse_revision
+            - const: cpr0_quotient1
+            - const: cpr0_quotient2
+            - const: cpr0_quotient3
+            - const: cpr0_quotient4
+            - const: cpr0_quotient_offset2
+            - const: cpr0_quotient_offset3
+            - const: cpr0_quotient_offset4
+            - const: cpr0_init_voltage1
+            - const: cpr0_init_voltage2
+            - const: cpr0_init_voltage3
+            - const: cpr0_init_voltage4
+            - const: cpr0_ring_osc1
+            - const: cpr0_ring_osc2
+            - const: cpr0_ring_osc3
+            - const: cpr0_ring_osc4
+            - const: cpr1_quotient1
+            - const: cpr1_quotient2
+            - const: cpr1_quotient3
+            - const: cpr1_quotient4
+            - const: cpr1_quotient_offset2
+            - const: cpr1_quotient_offset3
+            - const: cpr1_quotient_offset4
+            - const: cpr1_init_voltage1
+            - const: cpr1_init_voltage2
+            - const: cpr1_init_voltage3
+            - const: cpr1_init_voltage4
+            - const: cpr1_ring_osc1
+            - const: cpr1_ring_osc2
+            - const: cpr1_ring_osc3
+            - const: cpr1_ring_osc4
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-msm8998.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    cpus {
+        #address-cells = <2>;
+        #size-cells = <0>;
+
+        cpu@0 {
+            compatible = "qcom,kryo280";
+            device_type = "cpu";
+            reg = <0x0 0x0>;
+            operating-points-v2 = <&cpu0_opp_table>;
+            power-domains = <&apc_cprh 0>;
+            power-domain-names = "perf";
+        };
+
+        cpu@100 {
+            compatible = "qcom,kryo280";
+            device_type = "cpu";
+            reg = <0x0 0x100>;
+            operating-points-v2 = <&cpu4_opp_table>;
+            power-domains = <&apc_cprh 1>;
+            power-domain-names = "perf";
+        };
+    };
+
+    cpu0_opp_table: opp-table-cpu0 {
+        compatible = "operating-points-v2";
+        opp-shared;
+
+        opp-1843200000 {
+            opp-hz = /bits/ 64 <1843200000>;
+            required-opps = <&cprh_opp3>;
+        };
+
+        opp-1094400000 {
+            opp-hz = /bits/ 64 <1094400000>;
+            required-opps = <&cprh_opp2>;
+        };
+
+        opp-300000000 {
+            opp-hz = /bits/ 64 <300000000>;
+            required-opps = <&cprh_opp1>;
+        };
+    };
+
+    cpu4_opp_table: opp-table-cpu4 {
+        compatible = "operating-points-v2";
+        opp-shared;
+
+        opp-2208000000 {
+            opp-hz = /bits/ 64 <2208000000>;
+            required-opps = <&cprh_opp3>;
+        };
+
+        opp-1113600000 {
+            opp-hz = /bits/ 64 <1113600000>;
+            required-opps = <&cprh_opp2>;
+        };
+
+        opp-300000000 {
+            opp-hz = /bits/ 64 <300000000>;
+            required-opps = <&cprh_opp1>;
+        };
+    };
+
+    cprh_opp_table: opp-table-cprh {
+        compatible = "operating-points-v2-qcom-level";
+
+        cprh_opp1: opp-1 {
+            opp-level = <1>;
+            qcom,opp-fuse-level = <1>;
+            qcom,opp-cloop-vadj = <0>;
+            qcom,opp-oloop-vadj = <0>;
+        };
+
+        cprh_opp2: opp-2 {
+            opp-level = <2>;
+            qcom,opp-fuse-level = <2>;
+            qcom,opp-cloop-vadj = <0>;
+            qcom,opp-oloop-vadj = <0>;
+        };
+
+        cprh_opp3: opp-3 {
+            opp-level = <3>;
+            qcom,opp-fuse-level = <2 3>;
+            qcom,opp-cloop-vadj = <0>;
+            qcom,opp-oloop-vadj = <0>;
+        };
+    };
+
+    apc_cprh: power-controller@179c8000 {
+        compatible = "qcom,msm8998-cprh", "qcom,cprh";
+        reg = <0x0179c8000 0x4000>, <0x0179c4000 0x4000>;
+        clocks = <&gcc GCC_HMSS_RBCPR_CLK>;
+
+        operating-points-v2 = <&cprh_opp_table>;
+        #power-domain-cells = <1>;
+
+        nvmem-cells = <&cpr_efuse_speedbin>,
+                      <&cpr_fuse_revision>,
+                      <&cpr_quot0_pwrcl>,
+                      <&cpr_quot1_pwrcl>,
+                      <&cpr_quot2_pwrcl>,
+                      <&cpr_quot3_pwrcl>,
+                      <&cpr_quot_offset1_pwrcl>,
+                      <&cpr_quot_offset2_pwrcl>,
+                      <&cpr_quot_offset3_pwrcl>,
+                      <&cpr_init_voltage0_pwrcl>,
+                      <&cpr_init_voltage1_pwrcl>,
+                      <&cpr_init_voltage2_pwrcl>,
+                      <&cpr_init_voltage3_pwrcl>,
+                      <&cpr_ro_sel0_pwrcl>,
+                      <&cpr_ro_sel1_pwrcl>,
+                      <&cpr_ro_sel2_pwrcl>,
+                      <&cpr_ro_sel3_pwrcl>,
+                      <&cpr_quot0_perfcl>,
+                      <&cpr_quot1_perfcl>,
+                      <&cpr_quot2_perfcl>,
+                      <&cpr_quot3_perfcl>,
+                      <&cpr_quot_offset1_perfcl>,
+                      <&cpr_quot_offset2_perfcl>,
+                      <&cpr_quot_offset3_perfcl>,
+                      <&cpr_init_voltage0_perfcl>,
+                      <&cpr_init_voltage1_perfcl>,
+                      <&cpr_init_voltage2_perfcl>,
+                      <&cpr_init_voltage3_perfcl>,
+                      <&cpr_ro_sel0_perfcl>,
+                      <&cpr_ro_sel1_perfcl>,
+                      <&cpr_ro_sel2_perfcl>,
+                      <&cpr_ro_sel3_perfcl>;
+        nvmem-cell-names = "cpr_speed_bin",
+                           "cpr_fuse_revision",
+                           "cpr0_quotient1",
+                           "cpr0_quotient2",
+                           "cpr0_quotient3",
+                           "cpr0_quotient4",
+                           "cpr0_quotient_offset2",
+                           "cpr0_quotient_offset3",
+                           "cpr0_quotient_offset4",
+                           "cpr0_init_voltage1",
+                           "cpr0_init_voltage2",
+                           "cpr0_init_voltage3",
+                           "cpr0_init_voltage4",
+                           "cpr0_ring_osc1",
+                           "cpr0_ring_osc2",
+                           "cpr0_ring_osc3",
+                           "cpr0_ring_osc4",
+                           "cpr1_quotient1",
+                           "cpr1_quotient2",
+                           "cpr1_quotient3",
+                           "cpr1_quotient4",
+                           "cpr1_quotient_offset2",
+                           "cpr1_quotient_offset3",
+                           "cpr1_quotient_offset4",
+                           "cpr1_init_voltage1",
+                           "cpr1_init_voltage2",
+                           "cpr1_init_voltage3",
+                           "cpr1_init_voltage4",
+                           "cpr1_ring_osc1",
+                           "cpr1_ring_osc2",
+                           "cpr1_ring_osc3",
+                           "cpr1_ring_osc4";
+    };
+...