Message ID | 20240418125648.372526-13-Parthiban.Veerasooran@microchip.com |
---|---|
State | Not Applicable |
Headers | show |
Series | Add support for OPEN Alliance 10BASE-T1x MACPHY Serial Interface | expand |
Context | Check | Description |
---|---|---|
robh/checkpatch | success | |
robh/patch-applied | success | |
robh/dtbs-check | warning | build log |
robh/dt-meta-schema | success |
On Thu, Apr 18, 2024 at 06:26:48PM +0530, Parthiban Veerasooran wrote: > The LAN8650/1 combines a Media Access Controller (MAC) and an Ethernet > PHY to enable 10BASE-T1S networks. The Ethernet Media Access Controller > (MAC) module implements a 10 Mbps half duplex Ethernet MAC, compatible > with the IEEE 802.3 standard and a 10BASE-T1S physical layer transceiver > integrated into the LAN8650/1. The communication between the Host and the > MAC-PHY is specified in the OPEN Alliance 10BASE-T1x MACPHY Serial > Interface (TC6). > > Signed-off-by: Parthiban Veerasooran <Parthiban.Veerasooran@microchip.com> > --- > .../bindings/net/microchip,lan865x.yaml | 80 +++++++++++++++++++ > MAINTAINERS | 1 + > 2 files changed, 81 insertions(+) > create mode 100644 Documentation/devicetree/bindings/net/microchip,lan865x.yaml > > diff --git a/Documentation/devicetree/bindings/net/microchip,lan865x.yaml b/Documentation/devicetree/bindings/net/microchip,lan865x.yaml > new file mode 100644 > index 000000000000..4fdec0ba3532 > --- /dev/null > +++ b/Documentation/devicetree/bindings/net/microchip,lan865x.yaml Filename matching a compatible please. > @@ -0,0 +1,80 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/net/microchip,lan865x.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Microchip LAN8650/1 10BASE-T1S MACPHY Ethernet Controllers > + > +maintainers: > + - Parthiban Veerasooran <parthiban.veerasooran@microchip.com> > + > +description: > + The LAN8650/1 combines a Media Access Controller (MAC) and an Ethernet > + PHY to enable 10BASE‑T1S networks. The Ethernet Media Access Controller > + (MAC) module implements a 10 Mbps half duplex Ethernet MAC, compatible > + with the IEEE 802.3 standard and a 10BASE-T1S physical layer transceiver > + integrated into the LAN8650/1. The communication between the Host and > + the MAC-PHY is specified in the OPEN Alliance 10BASE-T1x MACPHY Serial > + Interface (TC6). > + > +allOf: > + - $ref: ethernet-controller.yaml# > + - $ref: /schemas/spi/spi-peripheral-props.yaml# Can you use the same referencing style for both elements here please? Otherwise, looks aight to me, so with those fixed: Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Thanks, Conor. > + > +properties: > + compatible: > + oneOf: > + - const: microchip,lan8650 > + - items: > + - const: microchip,lan8651 > + - const: microchip,lan8650 > + > + reg: > + maxItems: 1 > + > + interrupts: > + description: > + Interrupt from MAC-PHY asserted in the event of Receive Chunks > + Available, Transmit Chunk Credits Available and Extended Status > + Event. > + maxItems: 1 > + > + spi-max-frequency: > + minimum: 15000000 > + maximum: 25000000 > + > + "#address-cells": > + const: 1 > + > + "#size-cells": > + const: 0 > + > +required: > + - compatible > + - reg > + - interrupts > + - spi-max-frequency > + > +unevaluatedProperties: false > + > +examples: > + - | > + #include <dt-bindings/interrupt-controller/irq.h> > + #include <dt-bindings/gpio/gpio.h> > + > + spi { > + #address-cells = <1>; > + #size-cells = <0>; > + > + ethernet@0 { > + compatible = "microchip,lan8651", "microchip,lan8650"; > + reg = <0>; > + pinctrl-names = "default"; > + pinctrl-0 = <ð0_pins>; > + interrupt-parent = <&gpio>; > + interrupts = <6 IRQ_TYPE_EDGE_FALLING>; > + local-mac-address = [04 05 06 01 02 03]; > + spi-max-frequency = <15000000>; > + }; > + }; > diff --git a/MAINTAINERS b/MAINTAINERS > index f41b7f2257d2..2172431a1935 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -14378,6 +14378,7 @@ MICROCHIP LAN8650/1 10BASE-T1S MACPHY ETHERNET DRIVER > M: Parthiban Veerasooran <parthiban.veerasooran@microchip.com> > L: netdev@vger.kernel.org > S: Maintained > +F: Documentation/devicetree/bindings/net/microchip,lan865x.yaml > F: drivers/net/ethernet/microchip/lan865x/lan865x.c > > MICROCHIP LAN87xx/LAN937x T1 PHY DRIVER > -- > 2.34.1 >
Hi Conor, On 18/04/24 9:09 pm, Conor Dooley wrote: > On Thu, Apr 18, 2024 at 06:26:48PM +0530, Parthiban Veerasooran wrote: >> The LAN8650/1 combines a Media Access Controller (MAC) and an Ethernet >> PHY to enable 10BASE-T1S networks. The Ethernet Media Access Controller >> (MAC) module implements a 10 Mbps half duplex Ethernet MAC, compatible >> with the IEEE 802.3 standard and a 10BASE-T1S physical layer transceiver >> integrated into the LAN8650/1. The communication between the Host and the >> MAC-PHY is specified in the OPEN Alliance 10BASE-T1x MACPHY Serial >> Interface (TC6). >> >> Signed-off-by: Parthiban Veerasooran<Parthiban.Veerasooran@microchip.com> >> --- >> .../bindings/net/microchip,lan865x.yaml | 80 +++++++++++++++++++ >> MAINTAINERS | 1 + >> 2 files changed, 81 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/net/microchip,lan865x.yaml >> >> diff --git a/Documentation/devicetree/bindings/net/microchip,lan865x.yaml b/Documentation/devicetree/bindings/net/microchip,lan865x.yaml >> new file mode 100644 >> index 000000000000..4fdec0ba3532 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/net/microchip,lan865x.yaml > Filename matching a compatible please. > > OK. Then I will keep the filename as microchip,lan8650.yaml >> @@ -0,0 +1,80 @@ >> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) >> +%YAML 1.2 >> +--- >> +$id:http://devicetree.org/schemas/net/microchip,lan865x.yaml# >> +$schema:http://devicetree.org/meta-schemas/core.yaml# >> + >> +title: Microchip LAN8650/1 10BASE-T1S MACPHY Ethernet Controllers >> + >> +maintainers: >> + - Parthiban Veerasooran<parthiban.veerasooran@microchip.com> >> + >> +description: >> + The LAN8650/1 combines a Media Access Controller (MAC) and an Ethernet >> + PHY to enable 10BASE‑T1S networks. The Ethernet Media Access Controller >> + (MAC) module implements a 10 Mbps half duplex Ethernet MAC, compatible >> + with the IEEE 802.3 standard and a 10BASE-T1S physical layer transceiver >> + integrated into the LAN8650/1. The communication between the Host and >> + the MAC-PHY is specified in the OPEN Alliance 10BASE-T1x MACPHY Serial >> + Interface (TC6). >> + >> +allOf: >> + - $ref: ethernet-controller.yaml# >> + - $ref: /schemas/spi/spi-peripheral-props.yaml# > Can you use the same referencing style for both elements here please? > > OK. Then I will update this allOf section like below, allOf: - $ref: /schemas/net/ethernet-controller.yaml# - $ref: /schemas/spi/spi-peripheral-props.yaml# > Otherwise, looks aight to me, so with those fixed: > Reviewed-by: Conor Dooley<conor.dooley@microchip.com> > OK. If you agree with the above changes that you expected then I will add the tag in the next version with the proposed changes. Best regards, Parthiban V > Thanks, > Conor. > > >> + >> +properties: >> + compatible: >> + oneOf: >> + - const: microchip,lan8650 >> + - items: >> + - const: microchip,lan8651 >> + - const: microchip,lan8650 >> + >> + reg: >> + maxItems: 1 >> + >> + interrupts: >> + description: >> + Interrupt from MAC-PHY asserted in the event of Receive Chunks >> + Available, Transmit Chunk Credits Available and Extended Status >> + Event. >> + maxItems: 1 >> + >> + spi-max-frequency: >> + minimum: 15000000 >> + maximum: 25000000 >> + >> + "#address-cells": >> + const: 1 >> + >> + "#size-cells": >> + const: 0 >> + >> +required: >> + - compatible >> + - reg >> + - interrupts >> + - spi-max-frequency >> + >> +unevaluatedProperties: false >> + >> +examples: >> + - | >> + #include <dt-bindings/interrupt-controller/irq.h> >> + #include <dt-bindings/gpio/gpio.h> >> + >> + spi { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + >> + ethernet@0 { >> + compatible = "microchip,lan8651", "microchip,lan8650"; >> + reg = <0>; >> + pinctrl-names = "default"; >> + pinctrl-0 = <ð0_pins>; >> + interrupt-parent = <&gpio>; >> + interrupts = <6 IRQ_TYPE_EDGE_FALLING>; >> + local-mac-address = [04 05 06 01 02 03]; >> + spi-max-frequency = <15000000>; >> + }; >> + }; >> diff --git a/MAINTAINERS b/MAINTAINERS >> index f41b7f2257d2..2172431a1935 100644 >> --- a/MAINTAINERS >> +++ b/MAINTAINERS >> @@ -14378,6 +14378,7 @@ MICROCHIP LAN8650/1 10BASE-T1S MACPHY ETHERNET DRIVER >> M: Parthiban Veerasooran<parthiban.veerasooran@microchip.com> >> L: netdev@vger.kernel.org >> S: Maintained >> +F: Documentation/devicetree/bindings/net/microchip,lan865x.yaml >> F: drivers/net/ethernet/microchip/lan865x/lan865x.c >> >> MICROCHIP LAN87xx/LAN937x T1 PHY DRIVER >> -- >> 2.34.1 >>
On Mon, Apr 22, 2024 at 03:59:31AM +0000, Parthiban.Veerasooran@microchip.com wrote: > OK. If you agree with the above changes that you expected then I will > add the tag in the next version with the proposed changes. ye, they seem good, you can retain it.
Hi Conor, On 22/04/24 9:20 pm, Conor Dooley wrote: > On Mon, Apr 22, 2024 at 03:59:31AM +0000,Parthiban.Veerasooran@microchip.com wrote: >> OK. If you agree with the above changes that you expected then I will >> add the tag in the next version with the proposed changes. > ye, they seem good, you can retain it. OK. Thanks for the confirmation. Best regards, Parthiban V
diff --git a/Documentation/devicetree/bindings/net/microchip,lan865x.yaml b/Documentation/devicetree/bindings/net/microchip,lan865x.yaml new file mode 100644 index 000000000000..4fdec0ba3532 --- /dev/null +++ b/Documentation/devicetree/bindings/net/microchip,lan865x.yaml @@ -0,0 +1,80 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/microchip,lan865x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip LAN8650/1 10BASE-T1S MACPHY Ethernet Controllers + +maintainers: + - Parthiban Veerasooran <parthiban.veerasooran@microchip.com> + +description: + The LAN8650/1 combines a Media Access Controller (MAC) and an Ethernet + PHY to enable 10BASE‑T1S networks. The Ethernet Media Access Controller + (MAC) module implements a 10 Mbps half duplex Ethernet MAC, compatible + with the IEEE 802.3 standard and a 10BASE-T1S physical layer transceiver + integrated into the LAN8650/1. The communication between the Host and + the MAC-PHY is specified in the OPEN Alliance 10BASE-T1x MACPHY Serial + Interface (TC6). + +allOf: + - $ref: ethernet-controller.yaml# + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +properties: + compatible: + oneOf: + - const: microchip,lan8650 + - items: + - const: microchip,lan8651 + - const: microchip,lan8650 + + reg: + maxItems: 1 + + interrupts: + description: + Interrupt from MAC-PHY asserted in the event of Receive Chunks + Available, Transmit Chunk Credits Available and Extended Status + Event. + maxItems: 1 + + spi-max-frequency: + minimum: 15000000 + maximum: 25000000 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + +required: + - compatible + - reg + - interrupts + - spi-max-frequency + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/gpio/gpio.h> + + spi { + #address-cells = <1>; + #size-cells = <0>; + + ethernet@0 { + compatible = "microchip,lan8651", "microchip,lan8650"; + reg = <0>; + pinctrl-names = "default"; + pinctrl-0 = <ð0_pins>; + interrupt-parent = <&gpio>; + interrupts = <6 IRQ_TYPE_EDGE_FALLING>; + local-mac-address = [04 05 06 01 02 03]; + spi-max-frequency = <15000000>; + }; + }; diff --git a/MAINTAINERS b/MAINTAINERS index f41b7f2257d2..2172431a1935 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -14378,6 +14378,7 @@ MICROCHIP LAN8650/1 10BASE-T1S MACPHY ETHERNET DRIVER M: Parthiban Veerasooran <parthiban.veerasooran@microchip.com> L: netdev@vger.kernel.org S: Maintained +F: Documentation/devicetree/bindings/net/microchip,lan865x.yaml F: drivers/net/ethernet/microchip/lan865x/lan865x.c MICROCHIP LAN87xx/LAN937x T1 PHY DRIVER
The LAN8650/1 combines a Media Access Controller (MAC) and an Ethernet PHY to enable 10BASE-T1S networks. The Ethernet Media Access Controller (MAC) module implements a 10 Mbps half duplex Ethernet MAC, compatible with the IEEE 802.3 standard and a 10BASE-T1S physical layer transceiver integrated into the LAN8650/1. The communication between the Host and the MAC-PHY is specified in the OPEN Alliance 10BASE-T1x MACPHY Serial Interface (TC6). Signed-off-by: Parthiban Veerasooran <Parthiban.Veerasooran@microchip.com> --- .../bindings/net/microchip,lan865x.yaml | 80 +++++++++++++++++++ MAINTAINERS | 1 + 2 files changed, 81 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/microchip,lan865x.yaml