From patchwork Wed Dec 6 15:57:40 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Biju Das X-Patchwork-Id: 1872813 Return-Path: X-Original-To: incoming-dt@patchwork.ozlabs.org Delivered-To: patchwork-incoming-dt@legolas.ozlabs.org Authentication-Results: legolas.ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=2604:1380:4601:e00::3; helo=am.mirrors.kernel.org; envelope-from=devicetree+bounces-22387-incoming-dt=patchwork.ozlabs.org@vger.kernel.org; receiver=patchwork.ozlabs.org) Received: from am.mirrors.kernel.org (am.mirrors.kernel.org [IPv6:2604:1380:4601:e00::3]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature ECDSA (secp384r1)) (No client certificate requested) by legolas.ozlabs.org (Postfix) with ESMTPS id 4SlhsD1wc4z23mf for ; Thu, 7 Dec 2023 02:58:40 +1100 (AEDT) Received: from smtp.subspace.kernel.org (wormhole.subspace.kernel.org [52.25.139.140]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by am.mirrors.kernel.org (Postfix) with ESMTPS id 8FDD01F2164A for ; Wed, 6 Dec 2023 15:58:37 +0000 (UTC) Received: from localhost.localdomain (localhost.localdomain [127.0.0.1]) by smtp.subspace.kernel.org (Postfix) with ESMTP id C36CD45C15; Wed, 6 Dec 2023 15:58:33 +0000 (UTC) X-Original-To: devicetree@vger.kernel.org Received: from relmlie6.idc.renesas.com (relmlor2.renesas.com [210.160.252.172]) by lindbergh.monkeyblade.net (Postfix) with ESMTP id 24616DC; Wed, 6 Dec 2023 07:58:28 -0800 (PST) X-IronPort-AV: E=Sophos;i="6.04,255,1695654000"; d="scan'208";a="189413115" Received: from unknown (HELO relmlir6.idc.renesas.com) ([10.200.68.152]) by relmlie6.idc.renesas.com with ESMTP; 07 Dec 2023 00:58:27 +0900 Received: from localhost.localdomain (unknown [10.226.92.248]) by relmlir6.idc.renesas.com (Postfix) with ESMTP id 06174400FC25; Thu, 7 Dec 2023 00:58:21 +0900 (JST) From: Biju Das To: Dmitry Torokhov , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Lee Jones Cc: Biju Das , Support Opensource , "Rafael J. Wysocki" , Daniel Lezcano , Zhang Rui , Lukasz Luba , Steve Twiss , linux-input@vger.kernel.org, devicetree@vger.kernel.org, linux-pm@vger.kernel.org, Geert Uytterhoeven , Prabhakar Mahadev Lad , Biju Das , linux-renesas-soc@vger.kernel.org Subject: [PATCH v4 8/8] dt-bindings: mfd: dlg,da9063: Convert da9062 to json-schema Date: Wed, 6 Dec 2023 15:57:40 +0000 Message-Id: <20231206155740.5278-9-biju.das.jz@bp.renesas.com> X-Mailer: git-send-email 2.39.2 In-Reply-To: <20231206155740.5278-1-biju.das.jz@bp.renesas.com> References: <20231206155740.5278-1-biju.das.jz@bp.renesas.com> Precedence: bulk X-Mailing-List: devicetree@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Convert the da9062 PMIC device tree binding documentation to json-schema. Update the example to match reality. While at it, update description with link to product information. Signed-off-by: Biju Das --- v3->v4: * Split the thermal binding patch separate. * Updated the description. v2->v3: * Fixed bot errors related to MAINTAINERS entry, invalid doc references and thermal examples by merging patch#4. v2: * New patch --- .../bindings/input/dlg,da9062-onkey.yaml | 3 +- .../devicetree/bindings/mfd/da9062.txt | 124 ------------ .../devicetree/bindings/mfd/dlg,da9063.yaml | 186 +++++++++++++++++- .../bindings/thermal/dlg,da9062-thermal.yaml | 2 +- 4 files changed, 183 insertions(+), 132 deletions(-) delete mode 100644 Documentation/devicetree/bindings/mfd/da9062.txt diff --git a/Documentation/devicetree/bindings/input/dlg,da9062-onkey.yaml b/Documentation/devicetree/bindings/input/dlg,da9062-onkey.yaml index 4cff91f4bd34..18b6a3f02c07 100644 --- a/Documentation/devicetree/bindings/input/dlg,da9062-onkey.yaml +++ b/Documentation/devicetree/bindings/input/dlg,da9062-onkey.yaml @@ -11,8 +11,7 @@ maintainers: description: | This module is part of the DA9061/DA9062/DA9063. For more details about entire - DA9062 and DA9061 chips see Documentation/devicetree/bindings/mfd/da9062.txt - For DA9063 see Documentation/devicetree/bindings/mfd/dlg,da9063.yaml + DA906{1,2,3} chips see Documentation/devicetree/bindings/mfd/dlg,da9063.yaml This module provides the KEY_POWER event. diff --git a/Documentation/devicetree/bindings/mfd/da9062.txt b/Documentation/devicetree/bindings/mfd/da9062.txt deleted file mode 100644 index c8a7f119ac84..000000000000 --- a/Documentation/devicetree/bindings/mfd/da9062.txt +++ /dev/null @@ -1,124 +0,0 @@ -* Dialog DA9062 Power Management Integrated Circuit (PMIC) - -Product information for the DA9062 and DA9061 devices can be found here: -- https://www.dialog-semiconductor.com/products/da9062 -- https://www.dialog-semiconductor.com/products/da9061 - -The DA9062 PMIC consists of: - -Device Supply Names Description ------- ------------ ----------- -da9062-regulator : : LDOs & BUCKs -da9062-rtc : : Real-Time Clock -da9062-onkey : : On Key -da9062-watchdog : : Watchdog Timer -da9062-thermal : : Thermal -da9062-gpio : : GPIOs - -The DA9061 PMIC consists of: - -Device Supply Names Description ------- ------------ ----------- -da9062-regulator : : LDOs & BUCKs -da9062-onkey : : On Key -da9062-watchdog : : Watchdog Timer -da9062-thermal : : Thermal - -====== - -Required properties: - -- compatible : Should be - "dlg,da9062" for DA9062 - "dlg,da9061" for DA9061 -- reg : Specifies the I2C slave address (this defaults to 0x58 but it can be - modified to match the chip's OTP settings). - -Optional properties: - -- gpio-controller : Marks the device as a gpio controller. -- #gpio-cells : Should be two. The first cell is the pin number and the - second cell is used to specify the gpio polarity. - -See Documentation/devicetree/bindings/gpio/gpio.txt for further information on -GPIO bindings. - -- interrupts : IRQ line information. -- interrupt-controller - -See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt for -further information on IRQ bindings. - -Sub-nodes: - -- regulators : This node defines the settings for the LDOs and BUCKs. - The DA9062 regulators are bound using their names listed below: - - buck1 : BUCK_1 - buck2 : BUCK_2 - buck3 : BUCK_3 - buck4 : BUCK_4 - ldo1 : LDO_1 - ldo2 : LDO_2 - ldo3 : LDO_3 - ldo4 : LDO_4 - - The DA9061 regulators are bound using their names listed below: - - buck1 : BUCK_1 - buck2 : BUCK_2 - buck3 : BUCK_3 - ldo1 : LDO_1 - ldo2 : LDO_2 - ldo3 : LDO_3 - ldo4 : LDO_4 - - The component follows the standard regulator framework and the bindings - details of individual regulator device can be found in: - Documentation/devicetree/bindings/regulator/regulator.txt - - regulator-initial-mode may be specified for buck regulators using mode values - from include/dt-bindings/regulator/dlg,da9063-regulator.h. - -- rtc : This node defines settings required for the Real-Time Clock associated - with the DA9062. There are currently no entries in this binding, however - compatible = "dlg,da9062-rtc" should be added if a node is created. - -- onkey : See ../input/dlg,da9062-onkey.yaml - -- watchdog: See ../watchdog/dlg,da9062-watchdog.yaml - -- thermal : See ../thermal/dlg,da9062-thermal.yaml - -Example: - - pmic0: da9062@58 { - compatible = "dlg,da9062"; - reg = <0x58>; - interrupt-parent = <&gpio6>; - interrupts = <11 IRQ_TYPE_LEVEL_LOW>; - interrupt-controller; - - rtc { - compatible = "dlg,da9062-rtc"; - }; - - regulators { - DA9062_BUCK1: buck1 { - regulator-name = "BUCK1"; - regulator-min-microvolt = <300000>; - regulator-max-microvolt = <1570000>; - regulator-min-microamp = <500000>; - regulator-max-microamp = <2000000>; - regulator-initial-mode = ; - regulator-boot-on; - }; - DA9062_LDO1: ldo1 { - regulator-name = "LDO_1"; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <3600000>; - regulator-boot-on; - }; - }; - }; - diff --git a/Documentation/devicetree/bindings/mfd/dlg,da9063.yaml b/Documentation/devicetree/bindings/mfd/dlg,da9063.yaml index 676b4f2566ae..54bb23dbc73f 100644 --- a/Documentation/devicetree/bindings/mfd/dlg,da9063.yaml +++ b/Documentation/devicetree/bindings/mfd/dlg,da9063.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/mfd/dlg,da9063.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Dialog DA9063/DA9063L Power Management Integrated Circuit (PMIC) +title: Dialog DA906{3L,3,2,1} Power Management Integrated Circuit (PMIC) maintainers: - Steve Twiss @@ -17,10 +17,17 @@ description: | moment where all voltage monitors are disabled. Next, as da9063 only supports UV *and* OV monitoring, both must be set to the same severity and value (0: disable, 1: enable). + Product information for the DA906{3L,3,2,1} devices can be found here: + - https://www.dialog-semiconductor.com/products/da9063l + - https://www.dialog-semiconductor.com/products/da9063 + - https://www.dialog-semiconductor.com/products/da9062 + - https://www.dialog-semiconductor.com/products/da9061 properties: compatible: enum: + - dlg,da9061 + - dlg,da9062 - dlg,da9063 - dlg,da9063l @@ -35,6 +42,19 @@ properties: "#interrupt-cells": const: 2 + gpio: + type: object + $ref: /schemas/gpio/gpio.yaml# + unevaluatedProperties: false + properties: + compatible: + const: dlg,da9062-gpio + + gpio-controller: true + + "#gpio-cells": + const: 2 + onkey: $ref: /schemas/input/dlg,da9062-onkey.yaml @@ -42,7 +62,7 @@ properties: type: object additionalProperties: false patternProperties: - "^(ldo([1-9]|1[01])|bcore([1-2]|s-merged)|b(pro|mem|io|peri)|bmem-bio-merged)$": + "^(ldo([1-9]|1[01])|bcore([1-2]|s-merged)|b(pro|mem|io|peri)|bmem-bio-merged|buck[1-4])$": $ref: /schemas/regulator/regulator.yaml unevaluatedProperties: false @@ -52,7 +72,12 @@ properties: unevaluatedProperties: false properties: compatible: - const: dlg,da9063-rtc + enum: + - dlg,da9063-rtc + - dlg,da9062-rtc + + thermal: + $ref: /schemas/thermal/dlg,da9062-thermal.yaml watchdog: $ref: /schemas/watchdog/dlg,da9062-watchdog.yaml @@ -60,8 +85,65 @@ properties: required: - compatible - reg - - interrupts - - interrupt-controller + +allOf: + - if: + properties: + compatible: + contains: + enum: + - dlg,da9063 + - dlg,da9063l + then: + properties: + thermal: false + gpio: false + gpio-controller: false + "#gpio-cells": false + regulators: + patternProperties: + "^buck[1-4]$": false + required: + - interrupts + - interrupt-controller + + - if: + properties: + compatible: + contains: + enum: + - dlg,da9062 + then: + properties: + regulators: + patternProperties: + "^(ldo([5-9]|10|11)|bcore([1-2]|s-merged)|b(pro|mem|io|peri)|bmem-bio-merged)$": false + required: + - gpio + - onkey + - rtc + - thermal + - watchdog + + - if: + properties: + compatible: + contains: + enum: + - dlg,da9061 + then: + properties: + gpio: false + gpio-controller: false + "#gpio-cells": false + regulators: + patternProperties: + "^(ldo([5-9]|10|11)|bcore([1-2]|s-merged)|b(pro|mem|io|peri)|bmem-bio-merged|buck4)$": false + rtc: false + required: + - onkey + - thermal + - watchdog additionalProperties: false @@ -118,4 +200,98 @@ examples: }; }; }; + + - | + #include + #include + i2c { + #address-cells = <1>; + #size-cells = <0>; + pmic@58 { + compatible = "dlg,da9062"; + reg = <0x58>; + #interrupt-cells = <2>; + interrupt-parent = <&gpio1>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + + gpio { + compatible = "dlg,da9062-gpio"; + status = "disabled"; + }; + + onkey { + compatible = "dlg,da9062-onkey"; + }; + + regulators { + buck1 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <1380000>; + regulator-initial-mode = ; + regulator-always-on; + }; + buck2 { + regulator-name = "vdd_soc"; + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1380000>; + regulator-initial-mode = ; + regulator-always-on; + }; + buck3 { + regulator-name = "vdd_ddr3"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-initial-mode = ; + regulator-always-on; + }; + buck4 { + regulator-name = "vdd_eth"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + regulator-always-on; + }; + ldo1 { + regulator-name = "vdd_snvs"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + ldo2 { + regulator-name = "vdd_high"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + ldo3 { + regulator-name = "vdd_eth_io"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + }; + ldo4 { + regulator-name = "vdd_emmc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + }; + + rtc { + compatible = "dlg,da9062-rtc"; + status = "disabled"; + }; + + thermal { + compatible = "dlg,da9062-thermal"; + status = "disabled"; + }; + + watchdog { + compatible = "dlg,da9062-watchdog"; + dlg,use-sw-pm; + }; + }; + }; ... diff --git a/Documentation/devicetree/bindings/thermal/dlg,da9062-thermal.yaml b/Documentation/devicetree/bindings/thermal/dlg,da9062-thermal.yaml index 206635f74850..e8b2cac41084 100644 --- a/Documentation/devicetree/bindings/thermal/dlg,da9062-thermal.yaml +++ b/Documentation/devicetree/bindings/thermal/dlg,da9062-thermal.yaml @@ -11,7 +11,7 @@ maintainers: description: | This module is part of the DA9061/DA9062. For more details about entire - DA9062 and DA9061 chips see Documentation/devicetree/bindings/mfd/da9062.txt + DA906{1,2} chips see Documentation/devicetree/bindings/mfd/dlg,da9063.yaml Junction temperature thermal module uses an interrupt signal to identify high THERMAL_TRIP_HOT temperatures for the PMIC device.