[v8,2/3] dt-bindings: hwmon: Support Aspeed g6 PWM TACH Control

Document the compatible for aspeed,ast2600-pwm-tach device, which can
support up to 16 PWM outputs and 16 fan tach input.

Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
---
 .../bindings/hwmon/aspeed,g6-pwm-tach.yaml    | 67 +++++++++++++++++++
 1 file changed, 67 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/hwmon/aspeed,g6-pwm-tach.yaml

On Wed, Aug 30, 2023 at 08:32:01PM +0800, Billy Tsai wrote:
> Document the compatible for aspeed,ast2600-pwm-tach device, which can
> support up to 16 PWM outputs and 16 fan tach input.
> 
> Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
> ---
>  .../bindings/hwmon/aspeed,g6-pwm-tach.yaml    | 67 +++++++++++++++++++
>  1 file changed, 67 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/hwmon/aspeed,g6-pwm-tach.yaml
> 
> diff --git a/Documentation/devicetree/bindings/hwmon/aspeed,g6-pwm-tach.yaml b/Documentation/devicetree/bindings/hwmon/aspeed,g6-pwm-tach.yaml
> new file mode 100644
> index 000000000000..95bac5588c04
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/hwmon/aspeed,g6-pwm-tach.yaml
> @@ -0,0 +1,67 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +# Copyright (C) 2021 Aspeed, Inc.

A few years out of date.

> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/hwmon/aspeed,g6-pwm-tach.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: ASPEED G6 PWM and Fan Tach controller device driver
> +
> +maintainers:
> +  - Billy Tsai <billy_tsai@aspeedtech.com>
> +
> +description: |
> +  The ASPEED PWM controller can support up to 16 PWM outputs.
> +  The ASPEED Fan Tacho controller can support up to 16 fan tach input.

Are PWM and tach channels independent? Would be useful to know here.

> +
> +properties:
> +  compatible:
> +    enum:
> +      - aspeed,ast2600-pwm-tach
> +
> +  reg:
> +    maxItems: 1
> +
> +  clocks:
> +    maxItems: 1
> +
> +  resets:
> +    maxItems: 1
> +
> +  "#pwm-cells":
> +    const: 3
> +
> +patternProperties:
> +  "^fan[0-9a-f]_hwmon+$":

Drop 'hwmon'. Standard practice for naming without 'reg' is 
'^fan-[0-9]+$'.

> +    $ref: fan-common.yaml#

       unevaluatedProperties: false

> +    required:
> +      - tach-ch
> +
> +required:
> +  - reg
> +  - clocks
> +  - resets
> +  - "#pwm-cells"
> +  - compatible
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/aspeed-clock.h>
> +    pwm_tach: pwm-tach-controller@1e610000 {
> +      compatible = "aspeed,ast2600-pwm-tach";
> +      reg = <0x1e610000 0x100>;
> +      clocks = <&syscon ASPEED_CLK_AHB>;
> +      resets = <&syscon ASPEED_RESET_PWM>;
> +      #pwm-cells = <3>;

Blank line.

> +      fan0_hwmon {
> +        tach-ch = <0x0>;

Don't you need 'pwms'?

> +      };

Blank line.

> +      fan1_hwmon {
> +        tach-ch = <0x1>;
> +      };
> +      fan2_hwmon {
> +        tach-ch = <0x2>;
> +      };
> +    };
> -- 
> 2.25.1
>

>> +
>> +examples:
>> +  - |
>> +    #include <dt-bindings/clock/aspeed-clock.h>
>> +    pwm_tach: pwm-tach-controller@1e610000 {
>> +      compatible = "aspeed,ast2600-pwm-tach";
>> +      reg = <0x1e610000 0x100>;
>> +      clocks = <&syscon ASPEED_CLK_AHB>;
>> +      resets = <&syscon ASPEED_RESET_PWM>;
>> +      #pwm-cells = <3>;

> Blank line.

>> +      fan0_hwmon {
>> +        tach-ch = <0x0>;

> Don't you need 'pwms'?

Yes, I only want to create the fan monitor without fan control.

> +      };