diff mbox series

[v1] dt-bindings: serial: 8250_omap: add rs485-rts-active-high

Message ID 20230531064013.16551-1-francesco@dolcini.it
State Superseded, archived
Headers show
Series [v1] dt-bindings: serial: 8250_omap: add rs485-rts-active-high | expand

Checks

Context Check Description
robh/checkpatch warning total: 0 errors, 1 warnings, 7 lines checked
robh/patch-applied success
robh/dtbs-check warning build log
robh/dt-meta-schema success

Commit Message

Francesco Dolcini May 31, 2023, 6:40 a.m. UTC 
From: Francesco Dolcini <francesco.dolcini@toradex.com>

Add rs485-rts-active-high property, this was removed by mistake.
In general we just use rs485-rts-active-low property, however the OMAP
UART for legacy reason uses the -high one.

Fixes: 767d3467eb60 ("dt-bindings: serial: 8250_omap: drop rs485 properties")
Reported-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Closes: https://lore.kernel.org/all/ZGefR4mTHHo1iQ7H@francesco-nb.int.toradex.com/
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
---
 Documentation/devicetree/bindings/serial/8250_omap.yaml | 1 +
 1 file changed, 1 insertion(+)

Comments

Krzysztof Kozlowski May 31, 2023, 7:19 a.m. UTC | #1 
On 31/05/2023 08:40, Francesco Dolcini wrote:
> From: Francesco Dolcini <francesco.dolcini@toradex.com>
> 
> Add rs485-rts-active-high property, this was removed by mistake.
> In general we just use rs485-rts-active-low property, however the OMAP
> UART for legacy reason uses the -high one.
> 
> Fixes: 767d3467eb60 ("dt-bindings: serial: 8250_omap: drop rs485 properties")
> Reported-by: Francesco Dolcini <francesco.dolcini@toradex.com>

We do not add Reported-by tags for own reports. Otherwise all patches
would carry them. Reported-by is to credit 3rd party reported who did
not write the patch.


Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/serial/8250_omap.yaml b/Documentation/devicetree/bindings/serial/8250_omap.yaml
index eb3488d8f9ee..6a7be42da523 100644
--- a/Documentation/devicetree/bindings/serial/8250_omap.yaml
+++ b/Documentation/devicetree/bindings/serial/8250_omap.yaml
@@ -70,6 +70,7 @@  properties:
   dsr-gpios: true
   rng-gpios: true
   dcd-gpios: true
+  rs485-rts-active-high: true
   rts-gpio: true
   power-domains: true
   clock-frequency: true