new file mode 100644
@@ -0,0 +1,158 @@
+# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/ti,k3-m4f-rproc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI K3 M4F processor subsystems
+
+maintainers:
+ - Hari Nagalla <hnagalla@ti.com>
+
+description: |
+ Some K3 family SoCs have Arm Cortex M4F cores. AM64x is a SoC in K3
+ family with a M4F core. Typically safety oriented applications may use
+ the M4F core in isolation without an IPC. Where as some industrial and
+ home automation applications, may use the M4F core as a remote processor
+ with IPC communications.
+
+$ref: /schemas/arm/keystone/ti,k3-sci-common.yaml#
+
+properties:
+ $nodename:
+ pattern: "^m4fss(@.*)?"
+
+ compatible:
+ enum:
+ - ti,am64-m4fss
+
+ power-domains:
+ description: |
+ Should contain a phandle to a PM domain provider node and an args
+ specifier containing the M4FSS device id value.
+ maxItems: 1
+
+ "#address-cells":
+ const: 2
+
+ "#size-cells":
+ const: 2
+
+ reg:
+ items:
+ - description: Address and Size of the IRAM internal memory region
+ - description: Address and Size of the DRAM internal memory region
+
+ reg-names:
+ items:
+ - const: iram
+ - const: dram
+
+ resets:
+ description: |
+ Should contain the phandle to the reset controller node managing the
+ local resets for this device, and a reset specifier.
+ maxItems: 1
+
+ firmware-name:
+ description: |
+ Should contain the name of the default firmware image
+ file located on the firmware search path
+
+ mboxes:
+ description: |
+ OMAP Mailbox specifier denoting the sub-mailbox, to be used for
+ communication with the remote processor. This property should match
+ with the sub-mailbox node used in the firmware image.
+ maxItems: 1
+
+ memory-region:
+ description: |
+ phandle to the reserved memory nodes to be associated with the
+ remoteproc device. There should be at least two reserved memory nodes
+ defined. The reserved memory nodes should be carveout nodes, and
+ should be defined with a "no-map" property as per the bindings in
+ Documentation/devicetree/bindings/reserved-memory/reserved-memory.yaml
+ minItems: 2
+ maxItems: 8
+ items:
+ - description: region used for dynamic DMA allocations like vrings and
+ vring buffers
+ - description: region reserved for firmware image sections
+ additionalItems: true
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - ti,sci
+ - ti,sci-dev-id
+ - ti,sci-proc-ids
+ - resets
+ - firmware-name
+ - mboxes
+ - memory-region
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ mcu_m4fss_dma_memory_region: m4f-dma-memory@9cb00000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0x9cb00000 0x00 0x100000>;
+ no-map;
+ };
+
+ mcu_m4fss_memory_region: m4f-memory@9cc00000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0x9cc00000 0x00 0xe00000>;
+ no-map;
+ };
+ };
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ mailbox0_cluster0: mailbox-0 {
+ #mbox-cells = <1>;
+
+ mbox_m4_0: mbox-m4-0 {
+ ti,mbox-rx = <0 0 0>;
+ ti,mbox-tx = <1 0 0>;
+ };
+ };
+
+ bus@f0000 {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x00 0x04000000 0x00 0x04000000 0x00 0x01ff1400>;
+
+ bus@4000000 {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x00 0x04000000 0x00 0x04000000 0x00 0x01ff1400>;
+
+ mcu_m4fss: m4fss@5000000 {
+ compatible = "ti,am64-m4fss";
+ reg = <0x00 0x5000000 0x00 0x30000>,
+ <0x00 0x5040000 0x00 0x10000>;
+ reg-names = "iram", "dram";
+ ti,sci = <&dmsc>;
+ ti,sci-dev-id = <9>;
+ ti,sci-proc-ids = <0x18 0xff>;
+ resets = <&k3_reset 9 1>;
+ firmware-name = "am62-mcu-m4f0_0-fw";
+ mboxes = <&mailbox0_cluster0 &mbox_m4_0>;
+ memory-region = <&mcu_m4fss_dma_memory_region>,
+ <&mcu_m4fss_memory_region>;
+ };
+ };
+ };
+ };