@@ -27,6 +27,7 @@ properties:
- st,stm32f4-adc-core
- st,stm32h7-adc-core
- st,stm32mp1-adc-core
+ - st,stm32mp13-adc-core
reg:
maxItems: 1
@@ -37,6 +38,7 @@ properties:
- stm32f4 and stm32h7 share a common ADC interrupt line.
- stm32mp1 has two separate interrupt lines, one for each ADC within
ADC block.
+ - stm32mp13 has an interrupt line per ADC block.
minItems: 1
maxItems: 2
@@ -180,6 +182,33 @@ allOf:
maximum: 36000000
default: 36000000
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: st,stm32mp13-adc-core
+
+ then:
+ properties:
+ clocks:
+ minItems: 1
+ maxItems: 2
+
+ clock-names:
+ items:
+ - const: bus
+ - const: adc
+ minItems: 1
+
+ interrupts:
+ items:
+ - description: ADC interrupt line
+
+ st,max-clk-rate-hz:
+ minimum: 150000
+ maximum: 75000000
+ default: 75000000
+
additionalProperties: false
required:
@@ -208,6 +237,7 @@ patternProperties:
- st,stm32f4-adc
- st,stm32h7-adc
- st,stm32mp1-adc
+ - st,stm32mp13-adc
reg:
description: |
@@ -229,7 +259,7 @@ patternProperties:
interrupts:
description: |
IRQ Line for the ADC instance. Valid values are:
- - 0 for adc@0
+ - 0 for adc@0 (single adc for stm32mp13)
- 1 for adc@100
- 2 for adc@200 (stm32f4 only)
maxItems: 1
@@ -250,13 +280,14 @@ patternProperties:
assigned-resolution-bits:
description: |
Resolution (bits) to use for conversions:
- - can be 6, 8, 10 or 12 on stm32f4
+ - can be 6, 8, 10 or 12 on stm32f4 and stm32mp13
- can be 8, 10, 12, 14 or 16 on stm32h7 and stm32mp1
st,adc-channels:
description: |
List of single-ended channels muxed for this ADC. It can have up to:
- 16 channels, numbered from 0 to 15 (for in0..in15) on stm32f4
+ - 19 channels, numbered from 0 to 18 (for in0..in18) on stm32mp13.
- 20 channels, numbered from 0 to 19 (for in0..in19) on stm32h7 and
stm32mp1.
$ref: /schemas/types.yaml#/definitions/uint32-array
@@ -322,7 +353,7 @@ patternProperties:
label:
description: |
Unique name to identify which channel this is.
- Reserved label names "vddcore", "vrefint" and "vbat"
+ Reserved label names "vddcore", "vddcpu", "vddq_ddr", "vrefint" and "vbat"
are used to identify internal channels with matching names.
diff-channels:
@@ -419,6 +450,37 @@ patternProperties:
items:
minimum: 40
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: st,stm32mp13-adc
+
+ then:
+ properties:
+ reg:
+ const: 0x0
+
+ interrupts:
+ const: 0
+
+ assigned-resolution-bits:
+ enum: [6, 8, 10, 12]
+ default: 12
+
+ st,adc-channels:
+ minItems: 1
+ maxItems: 19
+ items:
+ minimum: 0
+ maximum: 18
+
+ st,min-sample-time-nsecs:
+ minItems: 1
+ maxItems: 19
+ items:
+ minimum: 40
additionalProperties: false
required:
Add st,stm32mp13-adc-core and st,stm32mp13-adc compatibles to support STM32MPU13 SoC. On STM32MP13x, each ADC peripheral has a single ADC block. These ADC peripherals, ADC1 and ADC2, are fully independent. Main characteristics of STM32MP13x ADC: - One interrupt line per ADC - 6 to 12 bits resolution - 19 channels ADC2 instance supports two extra internal channels VDDCPU and VDDQ_DDR. Add "vddcpu" and "vddq_ddr" internal channels names to the reserved labels list. Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com> --- .../bindings/iio/adc/st,stm32-adc.yaml | 68 ++++++++++++++++++- 1 file changed, 65 insertions(+), 3 deletions(-)