| Message ID | 20220607144740.14937-2-kavyasree.kotagiri@microchip.com |
|---|---|
| State | Changes Requested, archived |
| Headers | show |
| Series | Add support for lan966x flexcom chip-select configuration | expand |
| Context | Check | Description |
|---|---|---|
| robh/checkpatch | warning | total: 0 errors, 1 warnings, 97 lines checked |
| robh/patch-applied | success | |
| robh/dt-meta-schema | fail | build log |
On 07.06.2022 17:47, Kavyasree Kotagiri wrote: > Convert the Atmel flexcom device tree bindings to json schema. > > Signed-off-by: Kavyasree Kotagiri <kavyasree.kotagiri@microchip.com> > --- > v1 -> v2: > - Fix title. > > .../bindings/mfd/atmel,flexcom.yaml | 97 +++++++++++++++++++ > .../devicetree/bindings/mfd/atmel-flexcom.txt | 63 ------------ > 2 files changed, 97 insertions(+), 63 deletions(-) > create mode 100644 Documentation/devicetree/bindings/mfd/atmel,flexcom.yaml > delete mode 100644 Documentation/devicetree/bindings/mfd/atmel-flexcom.txt > > diff --git a/Documentation/devicetree/bindings/mfd/atmel,flexcom.yaml b/Documentation/devicetree/bindings/mfd/atmel,flexcom.yaml > new file mode 100644 > index 000000000000..05cb6ebb4b2a > --- /dev/null > +++ b/Documentation/devicetree/bindings/mfd/atmel,flexcom.yaml > @@ -0,0 +1,97 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/mfd/atmel,flexcom.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Atmel Flexcom (Flexible Serial Communication Unit) > + > +maintainers: > + - Kavyasree Kotagiri <kavyasree.kotagiri@microchip.com> > + > +description: > + The Atmel Flexcom is just a wrapper which embeds a SPI controller, > + an I2C controller and an USART. Only one function can be used at a > + time and is chosen at boot time according to the device tree. > + > +properties: > + compatible: > + const: atmel,sama5d2-flexcom > + > + reg: > + maxItems: 1 > + > + clocks: > + maxItems: 1 > + > + "#address-cells": > + const: 1 > + > + "#size-cells": > + const: 1 > + > + ranges: > + description: > + One range for the full I/O register region. (including USART, > + TWI and SPI registers). > + items: > + maxItems: 3 > + > + atmel,flexcom-mode: > + description: | > + Specifies the flexcom mode as follows: > + 1: USART > + 2: SPI > + 3: I2C. > + $ref: /schemas/types.yaml#/definitions/uint32 > + enum: [1, 2, 3] > + > +patternProperties: > + "^serial@[0-9a-f]+$": > + description: See atmel-usart.txt for details of USART bindings. > + type: object > + > + "^spi@[0-9a-f]+$": > + description: See ../spi/spi_atmel.txt for details of SPI bindings. > + type: object > + > + "^i2c@[0-9a-f]+$": > + description: See ../i2c/i2c-at91.txt for details of I2C bindings. > + type: object > + > +required: > + - compatible > + - reg > + - clocks > + - "#address-cells" > + - "#size-cells" > + - ranges > + - atmel,flexcom-mode > + > +additionalProperties: false > + > +examples: > + - | > + flx0: flexcom@f8034000 { > + compatible = "atmel,sama5d2-flexcom"; > + reg = <0xf8034000 0x200>; > + clocks = <&flx0_clk>; > + #address-cells = <1>; > + #size-cells = <1>; > + ranges = <0x0 0xf8034000 0x800>; > + atmel,flexcom-mode = <2>; > + > + spi0: spi@400 { > + compatible = "atmel,at91rm9200-spi"; > + reg = <0x400 0x200>; > + interrupts = <19 4 7>; You can still use IRQ_TYPE_LEVEL_HIGH instead of 4 as it was in previous atmel-flexcom.txt. > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_flx0_default>; > + #address-cells = <1>; > + #size-cells = <0>; > + clocks = <&flx0_clk>; > + clock-names = "spi_clk"; > + atmel,fifo-size = <32>; > + }; > + }; > +... > diff --git a/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt b/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt > deleted file mode 100644 > index 9d837535637b..000000000000 > --- a/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt > +++ /dev/null > @@ -1,63 +0,0 @@ > -* Device tree bindings for Atmel Flexcom (Flexible Serial Communication Unit) > - > -The Atmel Flexcom is just a wrapper which embeds a SPI controller, an I2C > -controller and an USART. Only one function can be used at a time and is chosen > -at boot time according to the device tree. > - > -Required properties: > -- compatible: Should be "atmel,sama5d2-flexcom" > -- reg: Should be the offset/length value for Flexcom dedicated > - I/O registers (without USART, TWI or SPI registers). > -- clocks: Should be the Flexcom peripheral clock from PMC. > -- #address-cells: Should be <1> > -- #size-cells: Should be <1> > -- ranges: Should be one range for the full I/O register region > - (including USART, TWI and SPI registers). > -- atmel,flexcom-mode: Should be one of the following values: > - - <1> for USART > - - <2> for SPI > - - <3> for I2C > - > -Required child: > -A single available child device of type matching the "atmel,flexcom-mode" > -property. > - > -The phandle provided by the clocks property of the child is the same as one for > -the Flexcom parent. > - > -For other properties, please refer to the documentations of the respective > -device: > -- ../serial/atmel-usart.txt > -- ../spi/spi_atmel.txt > -- ../i2c/i2c-at91.txt > - > -Example: > - > -flexcom@f8034000 { > - compatible = "atmel,sama5d2-flexcom"; > - reg = <0xf8034000 0x200>; > - clocks = <&flx0_clk>; > - #address-cells = <1>; > - #size-cells = <1>; > - ranges = <0x0 0xf8034000 0x800>; > - atmel,flexcom-mode = <2>; > - > - spi@400 { > - compatible = "atmel,at91rm9200-spi"; > - reg = <0x400 0x200>; > - interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>; > - pinctrl-names = "default"; > - pinctrl-0 = <&pinctrl_flx0_default>; > - #address-cells = <1>; > - #size-cells = <0>; > - clocks = <&flx0_clk>; > - clock-names = "spi_clk"; > - atmel,fifo-size = <32>; > - > - flash@0 { > - compatible = "atmel,at25f512b"; > - reg = <0>; > - spi-max-frequency = <20000000>; > - }; > - }; > -};
On 07/06/2022 16:47, Kavyasree Kotagiri wrote: > Convert the Atmel flexcom device tree bindings to json schema. > > Signed-off-by: Kavyasree Kotagiri <kavyasree.kotagiri@microchip.com> > --- > v1 -> v2: > - Fix title. > > .../bindings/mfd/atmel,flexcom.yaml | 97 +++++++++++++++++++ > .../devicetree/bindings/mfd/atmel-flexcom.txt | 63 ------------ > 2 files changed, 97 insertions(+), 63 deletions(-) > create mode 100644 Documentation/devicetree/bindings/mfd/atmel,flexcom.yaml > delete mode 100644 Documentation/devicetree/bindings/mfd/atmel-flexcom.txt > > diff --git a/Documentation/devicetree/bindings/mfd/atmel,flexcom.yaml b/Documentation/devicetree/bindings/mfd/atmel,flexcom.yaml > new file mode 100644 > index 000000000000..05cb6ebb4b2a > --- /dev/null > +++ b/Documentation/devicetree/bindings/mfd/atmel,flexcom.yaml > @@ -0,0 +1,97 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/mfd/atmel,flexcom.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Atmel Flexcom (Flexible Serial Communication Unit) > + > +maintainers: > + - Kavyasree Kotagiri <kavyasree.kotagiri@microchip.com> > + > +description: > + The Atmel Flexcom is just a wrapper which embeds a SPI controller, > + an I2C controller and an USART. Only one function can be used at a > + time and is chosen at boot time according to the device tree. > + > +properties: > + compatible: > + const: atmel,sama5d2-flexcom Same comment applies as before... Your previous set was better here and for some reason you decided to change it. This should be enum so you avoid useless change next patch. > + > + reg: > + maxItems: 1 > + > + clocks: > + maxItems: 1 > + > + "#address-cells": > + const: 1 > + > + "#size-cells": > + const: 1 > + > + ranges: > + description: > + One range for the full I/O register region. (including USART, > + TWI and SPI registers). > + items: > + maxItems: 3 > + > + atmel,flexcom-mode: > + description: | > + Specifies the flexcom mode as follows: > + 1: USART > + 2: SPI > + 3: I2C. > + $ref: /schemas/types.yaml#/definitions/uint32 > + enum: [1, 2, 3] > + > +patternProperties: > + "^serial@[0-9a-f]+$": > + description: See atmel-usart.txt for details of USART bindings. > + type: object > + > + "^spi@[0-9a-f]+$": > + description: See ../spi/spi_atmel.txt for details of SPI bindings. > + type: object > + > + "^i2c@[0-9a-f]+$": > + description: See ../i2c/i2c-at91.txt for details of I2C bindings. > + type: object > + > +required: > + - compatible > + - reg > + - clocks > + - "#address-cells" > + - "#size-cells" > + - ranges > + - atmel,flexcom-mode > + > +additionalProperties: false > + > +examples: > + - | > + flx0: flexcom@f8034000 { > + compatible = "atmel,sama5d2-flexcom"; > + reg = <0xf8034000 0x200>; > + clocks = <&flx0_clk>; > + #address-cells = <1>; > + #size-cells = <1>; > + ranges = <0x0 0xf8034000 0x800>; > + atmel,flexcom-mode = <2>; > + > + spi0: spi@400 { > + compatible = "atmel,at91rm9200-spi"; > + reg = <0x400 0x200>; > + interrupts = <19 4 7>; as pointed - looks like a IRQ flag > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_flx0_default>; > + #address-cells = <1>; > + #size-cells = <0>; > + clocks = <&flx0_clk>; > + clock-names = "spi_clk"; > + atmel,fifo-size = <32>; > + }; > + }; Best regards, Krzysztof
> > Convert the Atmel flexcom device tree bindings to json schema. > > > > Signed-off-by: Kavyasree Kotagiri <kavyasree.kotagiri@microchip.com> > > --- > > v1 -> v2: > > - Fix title. > > > > .../bindings/mfd/atmel,flexcom.yaml | 97 +++++++++++++++++++ > > .../devicetree/bindings/mfd/atmel-flexcom.txt | 63 ------------ > > 2 files changed, 97 insertions(+), 63 deletions(-) > > create mode 100644 > Documentation/devicetree/bindings/mfd/atmel,flexcom.yaml > > delete mode 100644 Documentation/devicetree/bindings/mfd/atmel- > flexcom.txt > > > > diff --git a/Documentation/devicetree/bindings/mfd/atmel,flexcom.yaml > b/Documentation/devicetree/bindings/mfd/atmel,flexcom.yaml > > new file mode 100644 > > index 000000000000..05cb6ebb4b2a > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/mfd/atmel,flexcom.yaml > > @@ -0,0 +1,97 @@ > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/mfd/atmel,flexcom.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: Atmel Flexcom (Flexible Serial Communication Unit) > > + > > +maintainers: > > + - Kavyasree Kotagiri <kavyasree.kotagiri@microchip.com> > > + > > +description: > > + The Atmel Flexcom is just a wrapper which embeds a SPI controller, > > + an I2C controller and an USART. Only one function can be used at a > > + time and is chosen at boot time according to the device tree. > > + > > +properties: > > + compatible: > > + const: atmel,sama5d2-flexcom > > Same comment applies as before... Your previous set was better here and > for some reason you decided to change it. This should be enum so you > avoid useless change next patch. > Thanks for your comments. Do you mean use "enum" instead of "const" in current patch itself and add new compatible in 2/3 patch? > > + > > + reg: > > + maxItems: 1 > > + > > + clocks: > > + maxItems: 1 > > + > > + "#address-cells": > > + const: 1 > > + > > + "#size-cells": > > + const: 1 > > + > > + ranges: > > + description: > > + One range for the full I/O register region. (including USART, > > + TWI and SPI registers). > > + items: > > + maxItems: 3 > > + > > + atmel,flexcom-mode: > > + description: | > > + Specifies the flexcom mode as follows: > > + 1: USART > > + 2: SPI > > + 3: I2C. > > + $ref: /schemas/types.yaml#/definitions/uint32 > > + enum: [1, 2, 3] > > + > > +patternProperties: > > + "^serial@[0-9a-f]+$": > > + description: See atmel-usart.txt for details of USART bindings. > > + type: object > > + > > + "^spi@[0-9a-f]+$": > > + description: See ../spi/spi_atmel.txt for details of SPI bindings. > > + type: object > > + > > + "^i2c@[0-9a-f]+$": > > + description: See ../i2c/i2c-at91.txt for details of I2C bindings. > > + type: object > > + > > +required: > > + - compatible > > + - reg > > + - clocks > > + - "#address-cells" > > + - "#size-cells" > > + - ranges > > + - atmel,flexcom-mode > > + > > +additionalProperties: false > > + > > +examples: > > + - | > > + flx0: flexcom@f8034000 { > > + compatible = "atmel,sama5d2-flexcom"; > > + reg = <0xf8034000 0x200>; > > + clocks = <&flx0_clk>; > > + #address-cells = <1>; > > + #size-cells = <1>; > > + ranges = <0x0 0xf8034000 0x800>; > > + atmel,flexcom-mode = <2>; > > + > > + spi0: spi@400 { > > + compatible = "atmel,at91rm9200-spi"; > > + reg = <0x400 0x200>; > > + interrupts = <19 4 7>; > > as pointed - looks like a IRQ flag > Ok. I will change it. > > + pinctrl-names = "default"; > > + pinctrl-0 = <&pinctrl_flx0_default>; > > + #address-cells = <1>; > > + #size-cells = <0>; > > + clocks = <&flx0_clk>; > > + clock-names = "spi_clk"; > > + atmel,fifo-size = <32>; > > + }; > > + }; > > > > Best regards, > Krzysztof
On 08/06/2022 11:31, Kavyasree.Kotagiri@microchip.com wrote: >>> Convert the Atmel flexcom device tree bindings to json schema. >>> >>> Signed-off-by: Kavyasree Kotagiri <kavyasree.kotagiri@microchip.com> >>> --- >>> v1 -> v2: >>> - Fix title. >>> >>> .../bindings/mfd/atmel,flexcom.yaml | 97 +++++++++++++++++++ >>> .../devicetree/bindings/mfd/atmel-flexcom.txt | 63 ------------ >>> 2 files changed, 97 insertions(+), 63 deletions(-) >>> create mode 100644 >> Documentation/devicetree/bindings/mfd/atmel,flexcom.yaml >>> delete mode 100644 Documentation/devicetree/bindings/mfd/atmel- >> flexcom.txt >>> >>> diff --git a/Documentation/devicetree/bindings/mfd/atmel,flexcom.yaml >> b/Documentation/devicetree/bindings/mfd/atmel,flexcom.yaml >>> new file mode 100644 >>> index 000000000000..05cb6ebb4b2a >>> --- /dev/null >>> +++ b/Documentation/devicetree/bindings/mfd/atmel,flexcom.yaml >>> @@ -0,0 +1,97 @@ >>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) >>> +%YAML 1.2 >>> +--- >>> +$id: http://devicetree.org/schemas/mfd/atmel,flexcom.yaml# >>> +$schema: http://devicetree.org/meta-schemas/core.yaml# >>> + >>> +title: Atmel Flexcom (Flexible Serial Communication Unit) >>> + >>> +maintainers: >>> + - Kavyasree Kotagiri <kavyasree.kotagiri@microchip.com> >>> + >>> +description: >>> + The Atmel Flexcom is just a wrapper which embeds a SPI controller, >>> + an I2C controller and an USART. Only one function can be used at a >>> + time and is chosen at boot time according to the device tree. >>> + >>> +properties: >>> + compatible: >>> + const: atmel,sama5d2-flexcom >> >> Same comment applies as before... Your previous set was better here and >> for some reason you decided to change it. This should be enum so you >> avoid useless change next patch. >> > Thanks for your comments. > Do you mean use "enum" instead of "const" in current patch itself and add new compatible in 2/3 patch? Yes. This is how you did it in previous patchsets. Best regards, Krzysztof
On Tue, 07 Jun 2022 20:17:38 +0530, Kavyasree Kotagiri wrote: > Convert the Atmel flexcom device tree bindings to json schema. > > Signed-off-by: Kavyasree Kotagiri <kavyasree.kotagiri@microchip.com> > --- > v1 -> v2: > - Fix title. > > .../bindings/mfd/atmel,flexcom.yaml | 97 +++++++++++++++++++ > .../devicetree/bindings/mfd/atmel-flexcom.txt | 63 ------------ > 2 files changed, 97 insertions(+), 63 deletions(-) > create mode 100644 Documentation/devicetree/bindings/mfd/atmel,flexcom.yaml > delete mode 100644 Documentation/devicetree/bindings/mfd/atmel-flexcom.txt > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: Documentation/devicetree/bindings/mfd/atmel,flexcom.example.dtb:0:0: /example-0/flexcom@f8034000/spi@400: failed to match any schema with compatible: ['atmel,at91rm9200-spi'] doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/patch/ This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit.
> >>> Convert the Atmel flexcom device tree bindings to json schema. > >>> > >>> Signed-off-by: Kavyasree Kotagiri <kavyasree.kotagiri@microchip.com> > >>> --- > >>> v1 -> v2: > >>> - Fix title. > >>> > >>> .../bindings/mfd/atmel,flexcom.yaml | 97 +++++++++++++++++++ > >>> .../devicetree/bindings/mfd/atmel-flexcom.txt | 63 ------------ > >>> 2 files changed, 97 insertions(+), 63 deletions(-) > >>> create mode 100644 > >> Documentation/devicetree/bindings/mfd/atmel,flexcom.yaml > >>> delete mode 100644 Documentation/devicetree/bindings/mfd/atmel- > >> flexcom.txt > >>> > >>> diff --git > a/Documentation/devicetree/bindings/mfd/atmel,flexcom.yaml > >> b/Documentation/devicetree/bindings/mfd/atmel,flexcom.yaml > >>> new file mode 100644 > >>> index 000000000000..05cb6ebb4b2a > >>> --- /dev/null > >>> +++ b/Documentation/devicetree/bindings/mfd/atmel,flexcom.yaml > >>> @@ -0,0 +1,97 @@ > >>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > >>> +%YAML 1.2 > >>> +--- > >>> +$id: http://devicetree.org/schemas/mfd/atmel,flexcom.yaml# > >>> +$schema: http://devicetree.org/meta-schemas/core.yaml# > >>> + > >>> +title: Atmel Flexcom (Flexible Serial Communication Unit) > >>> + > >>> +maintainers: > >>> + - Kavyasree Kotagiri <kavyasree.kotagiri@microchip.com> > >>> + > >>> +description: > >>> + The Atmel Flexcom is just a wrapper which embeds a SPI controller, > >>> + an I2C controller and an USART. Only one function can be used at a > >>> + time and is chosen at boot time according to the device tree. > >>> + > >>> +properties: > >>> + compatible: > >>> + const: atmel,sama5d2-flexcom > >> > >> Same comment applies as before... Your previous set was better here > and > >> for some reason you decided to change it. This should be enum so you > >> avoid useless change next patch. > >> > > Thanks for your comments. > > Do you mean use "enum" instead of "const" in current patch itself and > add new compatible in 2/3 patch? > > Yes. This is how you did it in previous patchsets. > I did so in v3 series, but below errors are reported on 1/3 patch: dtschema/dtc warnings/errors: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mfd/atmel,flexcom.yaml: properties:compatible:enum: 'atmel,sama5d2-flexcom' is not of type 'array' from schema $id: http://json-schema.org/draft-07/schema# /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mfd/atmel,flexcom.yaml: properties:compatible:enum: 'atmel,sama5d2-flexcom' is not of type 'array' from schema $id: http://devicetree.org/meta-schemas/keywords.yaml# /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mfd/atmel,flexcom.yaml: properties:compatible:enum: 'atmel,sama5d2-flexcom' is not of type 'array' from schema $id: http://devicetree.org/meta-schemas/string-array.yaml# > Best regards, > Krzysztof
On 16/06/2022 02:20, Kavyasree.Kotagiri@microchip.com wrote: >> >> Yes. This is how you did it in previous patchsets. >> > I did so in v3 series, but below errors are reported on 1/3 patch: > dtschema/dtc warnings/errors: > /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mfd/atmel,flexcom.yaml: properties:compatible:enum: 'atmel,sama5d2-flexcom' is not of type 'array' I don't remember it but it's a simple fix of syntax. Documentation/devicetree/bindings/arm/arm,cci-400.yaml Best regards, Krzysztof
diff --git a/Documentation/devicetree/bindings/mfd/atmel,flexcom.yaml b/Documentation/devicetree/bindings/mfd/atmel,flexcom.yaml new file mode 100644 index 000000000000..05cb6ebb4b2a --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/atmel,flexcom.yaml @@ -0,0 +1,97 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/atmel,flexcom.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Atmel Flexcom (Flexible Serial Communication Unit) + +maintainers: + - Kavyasree Kotagiri <kavyasree.kotagiri@microchip.com> + +description: + The Atmel Flexcom is just a wrapper which embeds a SPI controller, + an I2C controller and an USART. Only one function can be used at a + time and is chosen at boot time according to the device tree. + +properties: + compatible: + const: atmel,sama5d2-flexcom + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + ranges: + description: + One range for the full I/O register region. (including USART, + TWI and SPI registers). + items: + maxItems: 3 + + atmel,flexcom-mode: + description: | + Specifies the flexcom mode as follows: + 1: USART + 2: SPI + 3: I2C. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 2, 3] + +patternProperties: + "^serial@[0-9a-f]+$": + description: See atmel-usart.txt for details of USART bindings. + type: object + + "^spi@[0-9a-f]+$": + description: See ../spi/spi_atmel.txt for details of SPI bindings. + type: object + + "^i2c@[0-9a-f]+$": + description: See ../i2c/i2c-at91.txt for details of I2C bindings. + type: object + +required: + - compatible + - reg + - clocks + - "#address-cells" + - "#size-cells" + - ranges + - atmel,flexcom-mode + +additionalProperties: false + +examples: + - | + flx0: flexcom@f8034000 { + compatible = "atmel,sama5d2-flexcom"; + reg = <0xf8034000 0x200>; + clocks = <&flx0_clk>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xf8034000 0x800>; + atmel,flexcom-mode = <2>; + + spi0: spi@400 { + compatible = "atmel,at91rm9200-spi"; + reg = <0x400 0x200>; + interrupts = <19 4 7>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flx0_default>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&flx0_clk>; + clock-names = "spi_clk"; + atmel,fifo-size = <32>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt b/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt deleted file mode 100644 index 9d837535637b..000000000000 --- a/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt +++ /dev/null @@ -1,63 +0,0 @@ -* Device tree bindings for Atmel Flexcom (Flexible Serial Communication Unit) - -The Atmel Flexcom is just a wrapper which embeds a SPI controller, an I2C -controller and an USART. Only one function can be used at a time and is chosen -at boot time according to the device tree. - -Required properties: -- compatible: Should be "atmel,sama5d2-flexcom" -- reg: Should be the offset/length value for Flexcom dedicated - I/O registers (without USART, TWI or SPI registers). -- clocks: Should be the Flexcom peripheral clock from PMC. -- #address-cells: Should be <1> -- #size-cells: Should be <1> -- ranges: Should be one range for the full I/O register region - (including USART, TWI and SPI registers). -- atmel,flexcom-mode: Should be one of the following values: - - <1> for USART - - <2> for SPI - - <3> for I2C - -Required child: -A single available child device of type matching the "atmel,flexcom-mode" -property. - -The phandle provided by the clocks property of the child is the same as one for -the Flexcom parent. - -For other properties, please refer to the documentations of the respective -device: -- ../serial/atmel-usart.txt -- ../spi/spi_atmel.txt -- ../i2c/i2c-at91.txt - -Example: - -flexcom@f8034000 { - compatible = "atmel,sama5d2-flexcom"; - reg = <0xf8034000 0x200>; - clocks = <&flx0_clk>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0xf8034000 0x800>; - atmel,flexcom-mode = <2>; - - spi@400 { - compatible = "atmel,at91rm9200-spi"; - reg = <0x400 0x200>; - interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_flx0_default>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&flx0_clk>; - clock-names = "spi_clk"; - atmel,fifo-size = <32>; - - flash@0 { - compatible = "atmel,at25f512b"; - reg = <0>; - spi-max-frequency = <20000000>; - }; - }; -};
Convert the Atmel flexcom device tree bindings to json schema. Signed-off-by: Kavyasree Kotagiri <kavyasree.kotagiri@microchip.com> --- v1 -> v2: - Fix title. .../bindings/mfd/atmel,flexcom.yaml | 97 +++++++++++++++++++ .../devicetree/bindings/mfd/atmel-flexcom.txt | 63 ------------ 2 files changed, 97 insertions(+), 63 deletions(-) create mode 100644 Documentation/devicetree/bindings/mfd/atmel,flexcom.yaml delete mode 100644 Documentation/devicetree/bindings/mfd/atmel-flexcom.txt