From patchwork Wed Jan 12 18:16:02 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: =?utf-8?q?Marek_Beh=C3=BAn?= X-Patchwork-Id: 1579281 Return-Path: X-Original-To: incoming-dt@patchwork.ozlabs.org Delivered-To: patchwork-incoming-dt@bilbo.ozlabs.org Authentication-Results: bilbo.ozlabs.org; dkim=pass (2048-bit key; unprotected) header.d=kernel.org header.i=@kernel.org header.a=rsa-sha256 header.s=k20201202 header.b=KQJGwu2z; dkim-atps=neutral Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=23.128.96.18; helo=vger.kernel.org; envelope-from=devicetree-owner@vger.kernel.org; receiver=) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by bilbo.ozlabs.org (Postfix) with ESMTP id 4JYwjx20rxz9s9c for ; Thu, 13 Jan 2022 05:16:21 +1100 (AEDT) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1356093AbiALSQT (ORCPT ); Wed, 12 Jan 2022 13:16:19 -0500 Received: from ams.source.kernel.org ([145.40.68.75]:56912 "EHLO ams.source.kernel.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1356121AbiALSQL (ORCPT ); Wed, 12 Jan 2022 13:16:11 -0500 Received: from smtp.kernel.org (relay.kernel.org [52.25.139.140]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by ams.source.kernel.org (Postfix) with ESMTPS id 03520B8202D; Wed, 12 Jan 2022 18:16:10 +0000 (UTC) Received: by smtp.kernel.org (Postfix) with ESMTPSA id 8360BC36AE5; Wed, 12 Jan 2022 18:16:06 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=kernel.org; s=k20201202; t=1642011368; bh=J7F1bUADdGWlMHvynFP562AieLiEYMIBcsKTpe9EoMA=; h=From:To:Cc:Subject:Date:From; b=KQJGwu2zKzZ7CKlTuhdL1yof+jHa8eS22zW41Zdrd/dvL0YtMjCFm6qDLihvd+N6I 3/RZeRUTC5cuV9A0YIPf2nYuAGRWKfpoFXwTSVGP5fWAsvJY7TABfK4rE9ZSw9dO/7 KFAuIObzERpezDLX0/08qkkDHxr45wAQPhsUxw1paTW1OX1K/dqNoPqSGJ1mpLzGd+ X9tzqantNSikvWEbHQPwH26hJemh8VKBs18fCmAmPwSeZSLq/QBeEkxn19kAIYv0sA JY0mR7PVqfe2IbHc/kcxG86O4TpK2GoOmZZOepZVUjtXPdD/yFhu80WYWXbhX80JH9 BCSwZdQHL6W6Q== From: =?utf-8?q?Marek_Beh=C3=BAn?= To: Rob Herring , devicetree@vger.kernel.org Cc: Vladimir Oltean , Holger Brunck , Andrew Lunn , "netdev@vger.kernel.org" , Russell King , linux-phy@lists.infradead.org, Vinod Koul , Kishon Vijay Abraham I , =?utf-8?q?Marek_Beh=C3=BAn?= Subject: [PATCH devicetree v2] dt-bindings: phy: Add `tx-p2p-microvolt` property binding Date: Wed, 12 Jan 2022 19:16:02 +0100 Message-Id: <20220112181602.13661-1-kabel@kernel.org> X-Mailer: git-send-email 2.34.1 MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org Common PHYs and network PCSes often have the possibility to specify peak-to-peak voltage on the differential pair - the default voltage sometimes needs to be changed for a particular board. Add properties `tx-p2p-microvolt` and `tx-p2p-microvolt-names` for this purpose. The second property is needed to specify the mode for the corresponding voltage in the `tx-p2p-microvolt` property, if the voltage is to be used only for speficic mode. More voltage-mode pairs can be specified. Example usage with only one voltage (it will be used for all supported PHY modes, the `tx-p2p-microvolt-names` property is not needed in this case): tx-p2p-microvolt = <915000>; Example usage with voltages for multiple modes: tx-p2p-microvolt = <915000>, <1100000>, <1200000>; tx-p2p-microvolt-names = "2500base-x", "usb", "pcie"; Add these properties into a separate file phy/transmit-amplitude.yaml, selecting it for validation if either of the `tx-p2p-microvolt`, `tx-p2p-microvolt-names` properties is set for a node. Signed-off-by: Marek Behún --- .../bindings/phy/transmit-amplitude.yaml | 110 ++++++++++++++++++ 1 file changed, 110 insertions(+) create mode 100644 Documentation/devicetree/bindings/phy/transmit-amplitude.yaml diff --git a/Documentation/devicetree/bindings/phy/transmit-amplitude.yaml b/Documentation/devicetree/bindings/phy/transmit-amplitude.yaml new file mode 100644 index 000000000000..90a491b75f61 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/transmit-amplitude.yaml @@ -0,0 +1,110 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/transmit-amplitude.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Common PHY and network PCS transmit amplitude property binding + +description: + Binding describing the peak-to-peak transmit amplitude for common PHYs + and network PCSes. + +maintainers: + - Marek Behún + +properties: + tx-p2p-microvolt: + description: + Transmit amplitude voltages in microvolts, peak-to-peak. If this property + contains multiple values for various PHY modes, the + 'tx-p2p-microvolt-names' property must be provided and contain + corresponding mode names. + + tx-p2p-microvolt-names: + description: | + Names of the modes corresponding to voltages in the 'tx-p2p-microvolt' + property. Required only if multiple voltages are provided. + + If a value of 'default' is provided, the system should use it for any PHY + mode that is otherwise not defined here. If 'default' is not provided, the + system should use manufacturer default value. + minItems: 1 + maxItems: 16 + items: + enum: + - default + + # ethernet modes + - sgmii + - qsgmii + - xgmii + - 1000base-x + - 2500base-x + - 5gbase-r + - rxaui + - xaui + - 10gbase-kr + - usxgmii + - 10gbase-r + - 25gbase-r + + # PCIe modes + - pcie + - pcie1 + - pcie2 + - pcie3 + - pcie4 + - pcie5 + - pcie6 + + # USB modes + - usb + - usb-ls + - usb-fs + - usb-hs + - usb-ss + - usb-ss+ + - usb-4 + + # storage modes + - sata + - ufs-hs + - ufs-hs-a + - ufs-hs-b + + # display modes + - lvds + - dp + - dp-rbr + - dp-hbr + - dp-hbr2 + - dp-hbr3 + - dp-uhbr-10 + - dp-uhbr-13.5 + - dp-uhbr-20 + + # camera modes + - mipi-dphy + - mipi-dphy-univ + - mipi-dphy-v2.5-univ + +dependencies: + tx-p2p-microvolt-names: [ tx-p2p-microvolt ] + +select: + anyOf: + - required: + - 'tx-p2p-microvolt' + - required: + - 'tx-p2p-microvolt-names' + +additionalProperties: true + +examples: + - | + phy: phy { + #phy-cells = <1>; + tx-p2p-microvolt = <915000>, <1100000>, <1200000>; + tx-p2p-microvolt-names = "2500base-x", "usb-hs", "usb-ss"; + };