diff mbox series

[v18,15/17] of: fdt: Aggregate the processing of "linux,usable-memory-range"

Message ID 20211222130820.1754-16-thunder.leizhen@huawei.com
State Not Applicable, archived
Headers show
Series support reserving crashkernel above 4G on arm64 kdump | expand

Commit Message

Leizhen (ThunderTown) Dec. 22, 2021, 1:08 p.m. UTC
Currently, we parse the "linux,usable-memory-range" property in
early_init_dt_scan_chosen(), to obtain the specified memory range of the
crash kernel. We then reserve the required memory after
early_init_dt_scan_memory() has identified all available physical memory.
Because the two pieces of code are separated far, the readability and
maintainability are reduced. So bring them together.

Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Tested-by: Dave Kleikamp <dave.kleikamp@oracle.com>
---
 drivers/of/fdt.c | 15 +++++++++++----
 1 file changed, 11 insertions(+), 4 deletions(-)

Comments

Dave Kleikamp Dec. 23, 2021, 3:48 p.m. UTC | #1
On 12/22/21 7:08AM, Zhen Lei wrote:
> Currently, we parse the "linux,usable-memory-range" property in
> early_init_dt_scan_chosen(), to obtain the specified memory range of the
> crash kernel. We then reserve the required memory after
> early_init_dt_scan_memory() has identified all available physical memory.
> Because the two pieces of code are separated far, the readability and
> maintainability are reduced. So bring them together.

Rob Herring is pushing a modified version of this patch (changes made by
Pingfan Liu) to fix a regression. This will cause a conflict when it hits
mainline.

https://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git/log/?h=dt/linus

https://lore.kernel.org/linux-arm-kernel/20211214040157.27443-1-kernelfans@gmail.com/

> 
> Suggested-by: Rob Herring <robh@kernel.org>
> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
> Reviewed-by: Rob Herring <robh@kernel.org>
> Tested-by: Dave Kleikamp <dave.kleikamp@oracle.com>
> ---
>   drivers/of/fdt.c | 15 +++++++++++----
>   1 file changed, 11 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c
> index bdca35284cebd56..37b477a51175359 100644
> --- a/drivers/of/fdt.c
> +++ b/drivers/of/fdt.c
> @@ -965,8 +965,7 @@ static void __init early_init_dt_check_for_elfcorehdr(unsigned long node)
>   		 elfcorehdr_addr, elfcorehdr_size);
>   }
>   
> -static phys_addr_t cap_mem_addr;
> -static phys_addr_t cap_mem_size;
> +static unsigned long chosen_node_offset = -FDT_ERR_NOTFOUND;
>   
>   /**
>    * early_init_dt_check_for_usable_mem_range - Decode usable memory range
> @@ -977,6 +976,11 @@ static void __init early_init_dt_check_for_usable_mem_range(unsigned long node)
>   {
>   	const __be32 *prop;
>   	int len;
> +	phys_addr_t cap_mem_addr;
> +	phys_addr_t cap_mem_size;
> +
> +	if ((long)node < 0)
> +		return;
>   
>   	pr_debug("Looking for usable-memory-range property... ");
>   
> @@ -989,6 +993,8 @@ static void __init early_init_dt_check_for_usable_mem_range(unsigned long node)
>   
>   	pr_debug("cap_mem_start=%pa cap_mem_size=%pa\n", &cap_mem_addr,
>   		 &cap_mem_size);
> +
> +	memblock_cap_memory_range(cap_mem_addr, cap_mem_size);
>   }
>   
>   #ifdef CONFIG_SERIAL_EARLYCON
> @@ -1137,9 +1143,10 @@ int __init early_init_dt_scan_chosen(unsigned long node, const char *uname,
>   	    (strcmp(uname, "chosen") != 0 && strcmp(uname, "chosen@0") != 0))
>   		return 0;
>   
> +	chosen_node_offset = node;
> +
>   	early_init_dt_check_for_initrd(node);
>   	early_init_dt_check_for_elfcorehdr(node);
> -	early_init_dt_check_for_usable_mem_range(node);
>   
>   	/* Retrieve command line */
>   	p = of_get_flat_dt_prop(node, "bootargs", &l);
> @@ -1275,7 +1282,7 @@ void __init early_init_dt_scan_nodes(void)
>   	of_scan_flat_dt(early_init_dt_scan_memory, NULL);
>   
>   	/* Handle linux,usable-memory-range property */
> -	memblock_cap_memory_range(cap_mem_addr, cap_mem_size);
> +	early_init_dt_check_for_usable_mem_range(chosen_node_offset);
>   }
>   
>   bool __init early_init_dt_scan(void *params)
Leizhen (ThunderTown) Dec. 24, 2021, 1:03 a.m. UTC | #2
On 2021/12/23 23:48, Dave Kleikamp wrote:
> On 12/22/21 7:08AM, Zhen Lei wrote:
>> Currently, we parse the "linux,usable-memory-range" property in
>> early_init_dt_scan_chosen(), to obtain the specified memory range of the
>> crash kernel. We then reserve the required memory after
>> early_init_dt_scan_memory() has identified all available physical memory.
>> Because the two pieces of code are separated far, the readability and
>> maintainability are reduced. So bring them together.
> 
> Rob Herring is pushing a modified version of this patch (changes made by
> Pingfan Liu) to fix a regression. This will cause a conflict when it hits
> mainline.

Yes, I saw it yesterday, and I'll delete it in the next version. Thanks.

> 
> https://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git/log/?h=dt/linus
> 
> https://lore.kernel.org/linux-arm-kernel/20211214040157.27443-1-kernelfans@gmail.com/
> 
>>
>> Suggested-by: Rob Herring <robh@kernel.org>
>> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
>> Reviewed-by: Rob Herring <robh@kernel.org>
>> Tested-by: Dave Kleikamp <dave.kleikamp@oracle.com>
>> ---
>>   drivers/of/fdt.c | 15 +++++++++++----
>>   1 file changed, 11 insertions(+), 4 deletions(-)
>>
>> diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c
>> index bdca35284cebd56..37b477a51175359 100644
>> --- a/drivers/of/fdt.c
>> +++ b/drivers/of/fdt.c
>> @@ -965,8 +965,7 @@ static void __init early_init_dt_check_for_elfcorehdr(unsigned long node)
>>            elfcorehdr_addr, elfcorehdr_size);
>>   }
>>   -static phys_addr_t cap_mem_addr;
>> -static phys_addr_t cap_mem_size;
>> +static unsigned long chosen_node_offset = -FDT_ERR_NOTFOUND;
>>     /**
>>    * early_init_dt_check_for_usable_mem_range - Decode usable memory range
>> @@ -977,6 +976,11 @@ static void __init early_init_dt_check_for_usable_mem_range(unsigned long node)
>>   {
>>       const __be32 *prop;
>>       int len;
>> +    phys_addr_t cap_mem_addr;
>> +    phys_addr_t cap_mem_size;
>> +
>> +    if ((long)node < 0)
>> +        return;
>>         pr_debug("Looking for usable-memory-range property... ");
>>   @@ -989,6 +993,8 @@ static void __init early_init_dt_check_for_usable_mem_range(unsigned long node)
>>         pr_debug("cap_mem_start=%pa cap_mem_size=%pa\n", &cap_mem_addr,
>>            &cap_mem_size);
>> +
>> +    memblock_cap_memory_range(cap_mem_addr, cap_mem_size);
>>   }
>>     #ifdef CONFIG_SERIAL_EARLYCON
>> @@ -1137,9 +1143,10 @@ int __init early_init_dt_scan_chosen(unsigned long node, const char *uname,
>>           (strcmp(uname, "chosen") != 0 && strcmp(uname, "chosen@0") != 0))
>>           return 0;
>>   +    chosen_node_offset = node;
>> +
>>       early_init_dt_check_for_initrd(node);
>>       early_init_dt_check_for_elfcorehdr(node);
>> -    early_init_dt_check_for_usable_mem_range(node);
>>         /* Retrieve command line */
>>       p = of_get_flat_dt_prop(node, "bootargs", &l);
>> @@ -1275,7 +1282,7 @@ void __init early_init_dt_scan_nodes(void)
>>       of_scan_flat_dt(early_init_dt_scan_memory, NULL);
>>         /* Handle linux,usable-memory-range property */
>> -    memblock_cap_memory_range(cap_mem_addr, cap_mem_size);
>> +    early_init_dt_check_for_usable_mem_range(chosen_node_offset);
>>   }
>>     bool __init early_init_dt_scan(void *params)
> 
> .
>
diff mbox series

Patch

diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c
index bdca35284cebd56..37b477a51175359 100644
--- a/drivers/of/fdt.c
+++ b/drivers/of/fdt.c
@@ -965,8 +965,7 @@  static void __init early_init_dt_check_for_elfcorehdr(unsigned long node)
 		 elfcorehdr_addr, elfcorehdr_size);
 }
 
-static phys_addr_t cap_mem_addr;
-static phys_addr_t cap_mem_size;
+static unsigned long chosen_node_offset = -FDT_ERR_NOTFOUND;
 
 /**
  * early_init_dt_check_for_usable_mem_range - Decode usable memory range
@@ -977,6 +976,11 @@  static void __init early_init_dt_check_for_usable_mem_range(unsigned long node)
 {
 	const __be32 *prop;
 	int len;
+	phys_addr_t cap_mem_addr;
+	phys_addr_t cap_mem_size;
+
+	if ((long)node < 0)
+		return;
 
 	pr_debug("Looking for usable-memory-range property... ");
 
@@ -989,6 +993,8 @@  static void __init early_init_dt_check_for_usable_mem_range(unsigned long node)
 
 	pr_debug("cap_mem_start=%pa cap_mem_size=%pa\n", &cap_mem_addr,
 		 &cap_mem_size);
+
+	memblock_cap_memory_range(cap_mem_addr, cap_mem_size);
 }
 
 #ifdef CONFIG_SERIAL_EARLYCON
@@ -1137,9 +1143,10 @@  int __init early_init_dt_scan_chosen(unsigned long node, const char *uname,
 	    (strcmp(uname, "chosen") != 0 && strcmp(uname, "chosen@0") != 0))
 		return 0;
 
+	chosen_node_offset = node;
+
 	early_init_dt_check_for_initrd(node);
 	early_init_dt_check_for_elfcorehdr(node);
-	early_init_dt_check_for_usable_mem_range(node);
 
 	/* Retrieve command line */
 	p = of_get_flat_dt_prop(node, "bootargs", &l);
@@ -1275,7 +1282,7 @@  void __init early_init_dt_scan_nodes(void)
 	of_scan_flat_dt(early_init_dt_scan_memory, NULL);
 
 	/* Handle linux,usable-memory-range property */
-	memblock_cap_memory_range(cap_mem_addr, cap_mem_size);
+	early_init_dt_check_for_usable_mem_range(chosen_node_offset);
 }
 
 bool __init early_init_dt_scan(void *params)