diff mbox series

[v6,1/2] dt-bindings: iio: accel: Add bmi088 accelerometer bindings

Message ID 20210119124622.9490-1-mike.looijmans@topic.nl
State Changes Requested, archived
Headers show
Series [v6,1/2] dt-bindings: iio: accel: Add bmi088 accelerometer bindings | expand

Checks

Context Check Description
robh/checkpatch success
robh/dt-meta-schema fail build log

Commit Message

Mike Looijmans Jan. 19, 2021, 12:46 p.m. UTC 
This adds the device-tree bindings for the Bosch Sensortec BMI088 IMU,
the accelerometer part.

Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>

---

Changes in v6:
I't been almost a year since the last commit, sorry...
Fixed the yaml errors
Add interrupt, vdd and vddio properties

Changes in v5:
submit together with driver code as patch series

Changes in v2:
convert to yaml format

 .../bindings/iio/accel/bosch,bmi088.yaml      | 55 +++++++++++++++++++
 1 file changed, 55 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml

Comments

Rob Herring (Arm) Jan. 19, 2021, 11:28 p.m. UTC | #1 
On Tue, 19 Jan 2021 13:46:21 +0100, Mike Looijmans wrote:
> This adds the device-tree bindings for the Bosch Sensortec BMI088 IMU,
> the accelerometer part.
> 
> Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
> 
> ---
> 
> Changes in v6:
> I't been almost a year since the last commit, sorry...
> Fixed the yaml errors
> Add interrupt, vdd and vddio properties
> 
> Changes in v5:
> submit together with driver code as patch series
> 
> Changes in v2:
> convert to yaml format
> 
>  .../bindings/iio/accel/bosch,bmi088.yaml      | 55 +++++++++++++++++++
>  1 file changed, 55 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml: 'additionalProperties' is a required property
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml: ignoring, error in schema: 
warning: no schema found in file: ./Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml

See https://patchwork.ozlabs.org/patch/1428668

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.
Rob Herring (Arm) Jan. 20, 2021, 1:31 a.m. UTC | #2 
On Tue, Jan 19, 2021 at 01:46:21PM +0100, Mike Looijmans wrote:
> This adds the device-tree bindings for the Bosch Sensortec BMI088 IMU,
> the accelerometer part.
> 
> Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
> 
> ---
> 
> Changes in v6:
> I't been almost a year since the last commit, sorry...
> Fixed the yaml errors
> Add interrupt, vdd and vddio properties
> 
> Changes in v5:
> submit together with driver code as patch series
> 
> Changes in v2:
> convert to yaml format
> 
>  .../bindings/iio/accel/bosch,bmi088.yaml      | 55 +++++++++++++++++++
>  1 file changed, 55 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml
> 
> diff --git a/Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml b/Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml
> new file mode 100644
> index 000000000000..459b9969fd12
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml
> @@ -0,0 +1,55 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/iio/accel/bosch,bmi088.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Bosch BMI088 IMU accelerometer part
> +
> +maintainers:
> +  - Mike Looijmans <mike.looijmans@topic.nl>
> +
> +description: |
> +  Acceleration part of the IMU sensor with an SPI interface
> +  Specifications about the sensor can be found at:
> +    https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmi088-ds001.pdf
> +
> +properties:
> +  compatible:
> +    enum:
> +      - bosch,bmi088_accel

bosch,bmi088-accel

> +
> +  reg:
> +    maxItems: 1
> +
> +  vdd-supply: true
> +
> +  vddio-supply: true
> +
> +  interrupts:
> +    minItems: 1
> +    maxItems: 2
> +    description: |
> +      Type should be either IRQ_TYPE_LEVEL_HIGH or IRQ_TYPE_LEVEL_LOW.
> +      The first interrupt listed must be the one connected to the INT1 pin, the
> +      second must be the one connected to the INT2 pin.
> +
> +required:
> +  - compatible
> +  - reg
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +    spi {
> +      #address-cells = <1>;
> +      #size-cells = <0>;
> +      bmi088_accel@1 {
> +        compatible = "bosch,bmi088_accel";
> +        reg = <1>;
> +        spi-max-frequency = <10000000>;
> +        interrupt-parent = <&gpio6>;
> +        interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
> +      };
> +    };
> +...
> -- 
> 2.17.1
>
Mike Looijmans Jan. 20, 2021, 7:21 a.m. UTC | #3 
Wow, fast response, thanks.

Updated my dtschema, fixed the match name as requested and v7 is ready 
to go. I'm awaiting feedback from the iio people so I can send a new 
patch set.

M.


Met vriendelijke groet / kind regards,

Mike Looijmans
System Expert


TOPIC Embedded Products B.V.
Materiaalweg 4, 5681 RJ Best
The Netherlands

T: +31 (0) 499 33 69 69
E: mike.looijmans@topicproducts.com
W: www.topicproducts.com

Please consider the environment before printing this e-mail
On 20-01-2021 02:31, Rob Herring wrote:
> On Tue, Jan 19, 2021 at 01:46:21PM +0100, Mike Looijmans wrote:
>> This adds the device-tree bindings for the Bosch Sensortec BMI088 IMU,
>> the accelerometer part.
>>
>> Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
>>
>> ---
>>
>> Changes in v6:
>> I't been almost a year since the last commit, sorry...
>> Fixed the yaml errors
>> Add interrupt, vdd and vddio properties
>>
>> Changes in v5:
>> submit together with driver code as patch series
>>
>> Changes in v2:
>> convert to yaml format
>>
>>   .../bindings/iio/accel/bosch,bmi088.yaml      | 55 +++++++++++++++++++
>>   1 file changed, 55 insertions(+)
>>   create mode 100644 Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml b/Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml
>> new file mode 100644
>> index 000000000000..459b9969fd12
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml
>> @@ -0,0 +1,55 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/iio/accel/bosch,bmi088.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Bosch BMI088 IMU accelerometer part
>> +
>> +maintainers:
>> +  - Mike Looijmans <mike.looijmans@topic.nl>
>> +
>> +description: |
>> +  Acceleration part of the IMU sensor with an SPI interface
>> +  Specifications about the sensor can be found at:
>> +    https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmi088-ds001.pdf
>> +
>> +properties:
>> +  compatible:
>> +    enum:
>> +      - bosch,bmi088_accel
> bosch,bmi088-accel
>
>> +
>> +  reg:
>> +    maxItems: 1
>> +
>> +  vdd-supply: true
>> +
>> +  vddio-supply: true
>> +
>> +  interrupts:
>> +    minItems: 1
>> +    maxItems: 2
>> +    description: |
>> +      Type should be either IRQ_TYPE_LEVEL_HIGH or IRQ_TYPE_LEVEL_LOW.
>> +      The first interrupt listed must be the one connected to the INT1 pin, the
>> +      second must be the one connected to the INT2 pin.
>> +
>> +required:
>> +  - compatible
>> +  - reg
>> +
>> +examples:
>> +  - |
>> +    #include <dt-bindings/interrupt-controller/irq.h>
>> +    spi {
>> +      #address-cells = <1>;
>> +      #size-cells = <0>;
>> +      bmi088_accel@1 {
>> +        compatible = "bosch,bmi088_accel";
>> +        reg = <1>;
>> +        spi-max-frequency = <10000000>;
>> +        interrupt-parent = <&gpio6>;
>> +        interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
>> +      };
>> +    };
>> +...
>> -- 
>> 2.17.1
>>
Jonathan Cameron Jan. 20, 2021, 6:50 p.m. UTC | #4 
On Tue, 19 Jan 2021 13:46:21 +0100
Mike Looijmans <mike.looijmans@topic.nl> wrote:

> This adds the device-tree bindings for the Bosch Sensortec BMI088 IMU,
> the accelerometer part.
> 
> Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
> 
> ---
> 
> Changes in v6:
> I't been almost a year since the last commit, sorry...
No problem. Happens to us all sometimes!

One thing inline below.

Thanks,

Jonathan

> Fixed the yaml errors
> Add interrupt, vdd and vddio properties
> 
> Changes in v5:
> submit together with driver code as patch series
> 
> Changes in v2:
> convert to yaml format
> 
>  .../bindings/iio/accel/bosch,bmi088.yaml      | 55 +++++++++++++++++++
>  1 file changed, 55 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml
> 
> diff --git a/Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml b/Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml
> new file mode 100644
> index 000000000000..459b9969fd12
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml
> @@ -0,0 +1,55 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/iio/accel/bosch,bmi088.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Bosch BMI088 IMU accelerometer part
> +
> +maintainers:
> +  - Mike Looijmans <mike.looijmans@topic.nl>
> +
> +description: |
> +  Acceleration part of the IMU sensor with an SPI interface
> +  Specifications about the sensor can be found at:
> +    https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmi088-ds001.pdf
> +
> +properties:
> +  compatible:
> +    enum:
> +      - bosch,bmi088_accel
> +
> +  reg:
> +    maxItems: 1
> +
> +  vdd-supply: true
> +
> +  vddio-supply: true
> +
> +  interrupts:
> +    minItems: 1
> +    maxItems: 2
> +    description: |
> +      Type should be either IRQ_TYPE_LEVEL_HIGH or IRQ_TYPE_LEVEL_LOW.
> +      The first interrupt listed must be the one connected to the INT1 pin, the
> +      second must be the one connected to the INT2 pin.

What if the board only has the INT2 pin connected?
That's looks to be a valid hardware configuration.

I'd suggest using interrupt-names to cover this.

> +
> +required:
> +  - compatible
> +  - reg
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +    spi {
> +      #address-cells = <1>;
> +      #size-cells = <0>;
> +      bmi088_accel@1 {
> +        compatible = "bosch,bmi088_accel";
> +        reg = <1>;
> +        spi-max-frequency = <10000000>;
> +        interrupt-parent = <&gpio6>;
> +        interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
> +      };
> +    };
> +...
Mike Looijmans Jan. 21, 2021, 8:46 a.m. UTC | #5 
Comments inlined below.


Met vriendelijke groet / kind regards,

Mike Looijmans
System Expert


TOPIC Embedded Products B.V.
Materiaalweg 4, 5681 RJ Best
The Netherlands

T: +31 (0) 499 33 69 69
E: mike.looijmans@topicproducts.com
W: www.topicproducts.com

Please consider the environment before printing this e-mail
On 20-01-2021 19:50, Jonathan Cameron wrote:
> On Tue, 19 Jan 2021 13:46:21 +0100
> Mike Looijmans <mike.looijmans@topic.nl> wrote:
> 
>> This adds the device-tree bindings for the Bosch Sensortec BMI088 IMU,
>> the accelerometer part.
>>
>> Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
>>
>> ---
>>
>> Changes in v6:
>> I't been almost a year since the last commit, sorry...
> No problem. Happens to us all sometimes!
> 
> One thing inline below.
> 
> Thanks,
> 
> Jonathan
> 
>> Fixed the yaml errors
>> Add interrupt, vdd and vddio properties
>>
>> Changes in v5:
>> submit together with driver code as patch series
>>
>> Changes in v2:
>> convert to yaml format
>>
>>   .../bindings/iio/accel/bosch,bmi088.yaml      | 55 +++++++++++++++++++
>>   1 file changed, 55 insertions(+)
>>   create mode 100644 Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml b/Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml
>> new file mode 100644
>> index 000000000000..459b9969fd12
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml
>> @@ -0,0 +1,55 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/iio/accel/bosch,bmi088.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Bosch BMI088 IMU accelerometer part
>> +
>> +maintainers:
>> +  - Mike Looijmans <mike.looijmans@topic.nl>
>> +
>> +description: |
>> +  Acceleration part of the IMU sensor with an SPI interface
>> +  Specifications about the sensor can be found at:
>> +    https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmi088-ds001.pdf
>> +
>> +properties:
>> +  compatible:
>> +    enum:
>> +      - bosch,bmi088_accel
>> +
>> +  reg:
>> +    maxItems: 1
>> +
>> +  vdd-supply: true
>> +
>> +  vddio-supply: true
>> +
>> +  interrupts:
>> +    minItems: 1
>> +    maxItems: 2
>> +    description: |
>> +      Type should be either IRQ_TYPE_LEVEL_HIGH or IRQ_TYPE_LEVEL_LOW.
>> +      The first interrupt listed must be the one connected to the INT1 pin, the
>> +      second must be the one connected to the INT2 pin.
> 
> What if the board only has the INT2 pin connected?
> That's looks to be a valid hardware configuration.
> 
> I'd suggest using interrupt-names to cover this.

Yeah makes sense. The pins have the same functionality, so either one will do.

> 
>> +
>> +required:
>> +  - compatible
>> +  - reg
>> +
>> +examples:
>> +  - |
>> +    #include <dt-bindings/interrupt-controller/irq.h>
>> +    spi {
>> +      #address-cells = <1>;
>> +      #size-cells = <0>;
>> +      bmi088_accel@1 {
>> +        compatible = "bosch,bmi088_accel";
>> +        reg = <1>;
>> +        spi-max-frequency = <10000000>;
>> +        interrupt-parent = <&gpio6>;
>> +        interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
>> +      };
>> +    };
>> +...
>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml b/Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml
new file mode 100644
index 000000000000..459b9969fd12
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml
@@ -0,0 +1,55 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/accel/bosch,bmi088.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bosch BMI088 IMU accelerometer part
+
+maintainers:
+  - Mike Looijmans <mike.looijmans@topic.nl>
+
+description: |
+  Acceleration part of the IMU sensor with an SPI interface
+  Specifications about the sensor can be found at:
+    https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmi088-ds001.pdf
+
+properties:
+  compatible:
+    enum:
+      - bosch,bmi088_accel
+
+  reg:
+    maxItems: 1
+
+  vdd-supply: true
+
+  vddio-supply: true
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+    description: |
+      Type should be either IRQ_TYPE_LEVEL_HIGH or IRQ_TYPE_LEVEL_LOW.
+      The first interrupt listed must be the one connected to the INT1 pin, the
+      second must be the one connected to the INT2 pin.
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      bmi088_accel@1 {
+        compatible = "bosch,bmi088_accel";
+        reg = <1>;
+        spi-max-frequency = <10000000>;
+        interrupt-parent = <&gpio6>;
+        interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
+      };
+    };
+...