[v2,1/2] dt-bindings: iio: gyroscope: bmg160: Document regulator supplies

BMG160 needs VDD and VDDIO regulators that might need to be explicitly
enabled. Document support for vdd/vddio-supply to implement this.

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
---
Changes in v2:
  - Split from patches for bmc150
  - Add Reviewed-by:
---
 .../devicetree/bindings/iio/gyroscope/bosch,bmg160.yaml        | 3 +++
 1 file changed, 3 insertions(+)

On Fri, 11 Dec 2020 19:38:15 +0100
Stephan Gerhold <stephan@gerhold.net> wrote:

> BMG160 needs VDD and VDDIO regulators that might need to be explicitly
> enabled. Add some rudimentary support to obtain and enable these
> regulators during probe() and disable them using a devm action.
> 
> Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Looks good to me.  I'm going to let this sit a little longer though
(we've missed the merge window anyway so lots of time) in order to
give Linus a chance to look at this new version seeing as he
gave a Reviewed-by on previous but this is significantly different.

If it looks like I've managed to loose this (it has happened a few times!)
then please give me a poke in a few weeks time.

Thanks,

Jonathan

> ---
> Changes in v2:
>   - Do regulator_bulk_enable() immediately after devm_regulator_bulk_get()
>   - Simplify error handling using devm_add_action_or_reset()
> ---
>  drivers/iio/gyro/bmg160_core.c | 25 +++++++++++++++++++++++++
>  1 file changed, 25 insertions(+)
> 
> diff --git a/drivers/iio/gyro/bmg160_core.c b/drivers/iio/gyro/bmg160_core.c
> index 2d5015801a75..029ef4c34604 100644
> --- a/drivers/iio/gyro/bmg160_core.c
> +++ b/drivers/iio/gyro/bmg160_core.c
> @@ -19,6 +19,7 @@
>  #include <linux/iio/trigger_consumer.h>
>  #include <linux/iio/triggered_buffer.h>
>  #include <linux/regmap.h>
> +#include <linux/regulator/consumer.h>
>  #include "bmg160.h"
>  
>  #define BMG160_IRQ_NAME		"bmg160_event"
> @@ -92,6 +93,7 @@
>  
>  struct bmg160_data {
>  	struct regmap *regmap;
> +	struct regulator_bulk_data regulators[2];
>  	struct iio_trigger *dready_trig;
>  	struct iio_trigger *motion_trig;
>  	struct iio_mount_matrix orientation;
> @@ -1061,6 +1063,13 @@ static const char *bmg160_match_acpi_device(struct device *dev)
>  	return dev_name(dev);
>  }
>  
> +static void bmg160_disable_regulators(void *d)
> +{
> +	struct bmg160_data *data = d;
> +
> +	regulator_bulk_disable(ARRAY_SIZE(data->regulators), data->regulators);
> +}
> +
>  int bmg160_core_probe(struct device *dev, struct regmap *regmap, int irq,
>  		      const char *name)
>  {
> @@ -1077,6 +1086,22 @@ int bmg160_core_probe(struct device *dev, struct regmap *regmap, int irq,
>  	data->irq = irq;
>  	data->regmap = regmap;
>  
> +	data->regulators[0].supply = "vdd";
> +	data->regulators[1].supply = "vddio";
> +	ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(data->regulators),
> +				      data->regulators);
> +	if (ret)
> +		return dev_err_probe(dev, ret, "Failed to get regulators\n");
> +
> +	ret = regulator_bulk_enable(ARRAY_SIZE(data->regulators),
> +				    data->regulators);
> +	if (ret)
> +		return ret;
> +
> +	ret = devm_add_action_or_reset(dev, bmg160_disable_regulators, data);
> +	if (ret)
> +		return ret;
> +
>  	ret = iio_read_mount_matrix(dev, "mount-matrix",
>  				&data->orientation);
>  	if (ret)

On Fri, Dec 11, 2020 at 7:39 PM Stephan Gerhold <stephan@gerhold.net> wrote:

> BMG160 needs VDD and VDDIO regulators that might need to be explicitly
> enabled. Add some rudimentary support to obtain and enable these
> regulators during probe() and disable them using a devm action.
>
> Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
> ---
> Changes in v2:
>   - Do regulator_bulk_enable() immediately after devm_regulator_bulk_get()
>   - Simplify error handling using devm_add_action_or_reset()

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

Yours,
Linus Walleij

On Mon, 14 Dec 2020 09:57:06 +0100
Linus Walleij <linus.walleij@linaro.org> wrote:

> On Fri, Dec 11, 2020 at 7:39 PM Stephan Gerhold <stephan@gerhold.net> wrote:
> 
> > BMG160 needs VDD and VDDIO regulators that might need to be explicitly
> > enabled. Add some rudimentary support to obtain and enable these
> > regulators during probe() and disable them using a devm action.
> >
> > Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
> > ---
> > Changes in v2:
> >   - Do regulator_bulk_enable() immediately after devm_regulator_bulk_get()
> >   - Simplify error handling using devm_add_action_or_reset()  
> 
> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Series applied,

Thanks,

Jonathan

> 
> Yours,
> Linus Walleij