[v2,04/11] dt-bindings:iio:adc:atmel,sama9260-adc: conversion to yaml from at91_adc.txt

diff --git a/Documentation/devicetree/bindings/iio/adc/at91_adc.txt b/Documentation/devicetree/bindings/iio/adc/at91_adc.txt
deleted file mode 100644
index da393ac5c05f..000000000000
--- a/Documentation/devicetree/bindings/iio/adc/at91_adc.txt
+++ /dev/null
@@ -1,78 +0,0 @@ 
-* AT91's Analog to Digital Converter (ADC)
-
-Required properties:
-  - compatible: Should be "atmel,<chip>-adc"
-    <chip> can be "at91sam9260", "at91sam9g45", "at91sam9x5" or "sama5d3"
-  - reg: Should contain ADC registers location and length
-  - interrupts: Should contain the IRQ line for the ADC
-  - clock-names: tuple listing input clock names.
-	Required elements: "adc_clk", "adc_op_clk".
-  - clocks: phandles to input clocks.
-  - atmel,adc-channels-used: Bitmask of the channels muxed and enabled for this
-    device
-  - atmel,adc-startup-time: Startup Time of the ADC in microseconds as
-    defined in the datasheet
-  - atmel,adc-vref: Reference voltage in millivolts for the conversions
-
-Optional properties:
-  - atmel,adc-use-external-triggers: Boolean to enable the external triggers
-  - atmel,adc-use-res: String selecting the resolution, can be "lowres" or
-		       "highres". If not specified, the highest resolution will
-		       be used.
-  - atmel,adc-sleep-mode: Boolean to enable sleep mode when no conversion
-  - atmel,adc-sample-hold-time: Sample and Hold Time in microseconds
-  - atmel,adc-ts-wires: Number of touchscreen wires. Should be 4 or 5. If this
-                        value is set, then the adc driver will enable touchscreen
-                        support.
-    NOTE: when adc touchscreen is enabled, the adc hardware trigger will be
-          disabled. Since touchscreen will occupy the trigger register.
-  - atmel,adc-ts-pressure-threshold: a pressure threshold for touchscreen. It
-                                     makes touch detection more precise.
-
-Optional trigger Nodes:
-  - Required properties:
-    * trigger-name: Name of the trigger exposed to the user
-    * trigger-value: Value to put in the Trigger register
-      to activate this trigger
-  - Optional properties:
-    * trigger-external: Is the trigger an external trigger?
-
-Examples:
-adc0: adc@fffb0000 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	compatible = "atmel,at91sam9260-adc";
-	reg = <0xfffb0000 0x100>;
-	interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
-	clocks = <&adc_clk>, <&adc_op_clk>;
-	clock-names = "adc_clk", "adc_op_clk";
-	atmel,adc-channels-used = <0xff>;
-	atmel,adc-startup-time = <40>;
-	atmel,adc-use-external-triggers;
-	atmel,adc-vref = <3300>;
-	atmel,adc-res = <8 10>;
-	atmel,adc-res-names = "lowres", "highres";
-	atmel,adc-use-res = "lowres";
-
-	trigger0 {
-		trigger-name = "external-rising";
-		trigger-value = <0x1>;
-		trigger-external;
-	};
-	trigger1 {
-		trigger-name = "external-falling";
-		trigger-value = <0x2>;
-		trigger-external;
-	};
-
-	trigger2 {
-		trigger-name = "external-any";
-		trigger-value = <0x3>;
-		trigger-external;
-	};
-
-	trigger3 {
-		trigger-name = "continuous";
-		trigger-value = <0x6>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/iio/adc/atmel,sama9260-adc.yaml b/Documentation/devicetree/bindings/iio/adc/atmel,sama9260-adc.yaml
new file mode 100644
index 000000000000..9b0ff59e75de
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/atmel,sama9260-adc.yaml
@@ -0,0 +1,167 @@ 
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/atmel,sama9260-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AT91 sama9260 and similar Analog to Digital Converter (ADC)
+
+maintainers:
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+
+properties:
+  compatible:
+    enum:
+      - atmel,at91sam9260-adc
+      - atmel,at91sam9rl-adc
+      - atmel,at91sam9g45-adc
+      - atmel,at91sam9x5-adc
+      - atmel,at91sama5d3-adc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: adc_clk
+      - const: adc_op_clk
+
+  atmel,adc-channels-used:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Bitmask of the channels muxed and enabled for this device
+
+  atmel,adc-startup-time:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Startup Time of the ADC in microseconds as defined in the datasheet
+
+  atmel,adc-vref:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Reference voltage in millivolts for the conversions
+
+  atmel,adc-use-external-triggers:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: Enable the external triggers
+
+  atmel,adc-use-res:
+    $ref: /schemas/types.yaml#/definitions/string
+    description:
+      String corresponding to an identifier from atmel,adc-res-names property.
+      If not specified, the highest resolution will be used.
+    enum:
+      - "lowres"
+      - "highres"
+
+  atmel,adc-sleep-mode:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: Enable sleep mode when no conversion
+
+  atmel,adc-sample-hold-time:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Sample and Hold Time in microseconds
+
+  atmel,adc-ts-wires:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Number of touchscreen wires. Must be set to enable touchscreen.
+      NOTE: when adc touchscreen is enabled, the adc hardware trigger will be
+      disabled. Since touchscreen will occupy the trigger register.
+    enum:
+      - 4
+      - 5
+
+  atmel,adc-ts-pressure-threshold:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Pressure threshold for touchscreen.
+
+  "#io-channel-cells":
+    const: 1
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - atmel,adc-channels-used
+  - atmel,adc-startup-time
+  - atmel,adc-vref
+
+patternProperties:
+  "^(trigger)[0-9]$":
+    type: object
+    description: Child node to describe a trigger exposed to the user.
+    properties:
+      trigger-name:
+        $ref: /schemas/types.yaml#/definitions/string
+        description: Identifying name.
+
+      trigger-value:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Value to put in the Trigger register to activate this trigger
+
+      trigger-external:
+        $ref: /schemas/types.yaml#/definitions/flag
+        description: This trigger is provided from an external pin.
+
+    additionalProperties: false
+    required:
+      - trigger-name
+      - trigger-value
+
+examples:
+  - |
+    #include <dt-bindings/dma/at91.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    soc {
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        adc@fffb0000 {
+            compatible = "atmel,at91sam9260-adc";
+            reg = <0xfffb0000 0x100>;
+            interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
+            clocks = <&adc_clk>, <&adc_op_clk>;
+            clock-names = "adc_clk", "adc_op_clk";
+            atmel,adc-channels-used = <0xff>;
+            atmel,adc-startup-time = <40>;
+            atmel,adc-use-external-triggers;
+            atmel,adc-vref = <3300>;
+            atmel,adc-use-res = "lowres";
+
+            trigger0 {
+                trigger-name = "external-rising";
+                trigger-value = <0x1>;
+                trigger-external;
+            };
+
+            trigger1 {
+                trigger-name = "external-falling";
+                trigger-value = <0x2>;
+                trigger-external;
+            };
+
+            trigger2 {
+                trigger-name = "external-any";
+                trigger-value = <0x3>;
+                trigger-external;
+            };
+
+            trigger3 {
+                trigger-name = "continuous";
+                trigger-value = <0x6>;
+            };
+        };
+    };
+...