Message ID | 20201107115809.1866131-1-aford173@gmail.com |
---|---|
State | Changes Requested, archived |
Headers | show |
Series | [V4,1/5] dt-bindings: soc: imx: Add binding doc for spba bus | expand |
Context | Check | Description |
---|---|---|
robh/checkpatch | success | |
robh/dt-meta-schema | fail | build log |
On Sat, 07 Nov 2020 05:58:04 -0600, Adam Ford wrote: > Add binding doc for fsl,spba-bus. > > Signed-off-by: Adam Ford <aford173@gmail.com> > --- > V4: Correct errors in YAML > V3: New to series > > .../devicetree/bindings/bus/fsl,spba-bus.yaml | 66 +++++++++++++++++++ > 1 file changed, 66 insertions(+) > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/bus/fsl,spba-bus.yaml: properties:items: [{'const': 'fsl,spba-bus'}, {'const': 'simple-bus'}] is not of type 'object', 'boolean' /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/bus/fsl,spba-bus.yaml: Additional properties are not allowed ('type' was unexpected) /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/bus/fsl,spba-bus.yaml: properties: {'enum': ['$ref', 'additionalItems', 'additionalProperties', 'allOf', 'anyOf', 'const', 'contains', 'default', 'dependencies', 'deprecated', 'description', 'else', 'enum', 'if', 'items', 'maxItems', 'maximum', 'minItems', 'minimum', 'multipleOf', 'not', 'oneOf', 'pattern', 'patternProperties', 'properties', 'propertyNames', 'required', 'then', 'unevaluatedProperties']} is not allowed for 'items' ./Documentation/devicetree/bindings/bus/fsl,spba-bus.yaml: $id: relative path/filename doesn't match actual path or filename expected: http://devicetree.org/schemas/bus/fsl,spba-bus.yaml# /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/bus/fsl,spba-bus.yaml: ignoring, error in schema: properties: items warning: no schema found in file: ./Documentation/devicetree/bindings/bus/fsl,spba-bus.yaml See https://patchwork.ozlabs.org/patch/1396117 The base for the patch is generally the last rc1. Any dependencies should be noted. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit.
On Sat, Nov 7, 2020 at 5:58 AM Adam Ford <aford173@gmail.com> wrote: > > The driver exists for the Enhanced Asynchronous Sample Rate Converter > (EASRC) Controller, but there isn't a device tree entry for it. > > On the vendor kernel, they put this on a spba-bus for SDMA support. > > Add the node for the spba-bus with the easrc node inside. > > Signed-off-by: Adam Ford <aford173@gmail.com> Shawn, I split the dt-binding into a separate patch since I was struggling with checking the yaml syntax. Rob helped me find the proper branch to use. I hope it goes through this time. Do you have any comments on the rest of the series? I would like to fix them if you have any concerns so I can resend if/when the dt-binding is accepted. thanks, adam > --- > V4: No change > V3: Change spba-bus@30000000 to spba: bus@30000000 > V2: Make the DT node more in-line with the dt binding and remove > vendor customizations that are not applicable. > arch/arm64/boot/dts/freescale/imx8mn.dtsi | 28 +++++++++++++++++++++++ > 1 file changed, 28 insertions(+) > > diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi > index a06d2a6268e6..61560c083300 100644 > --- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi > +++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi > @@ -253,6 +253,34 @@ aips1: bus@30000000 { > #size-cells = <1>; > ranges; > > + spba: bus@30000000 { > + compatible = "fsl,spba-bus", "simple-bus"; > + #address-cells = <1>; > + #size-cells = <1>; > + reg = <0x30000000 0x100000>; > + ranges; > + > + easrc: easrc@300c0000 { > + compatible = "fsl,imx8mn-easrc"; > + reg = <0x300c0000 0x10000>; > + interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&clk IMX8MN_CLK_ASRC_ROOT>; > + clock-names = "mem"; > + dmas = <&sdma2 16 23 0> , <&sdma2 17 23 0>, > + <&sdma2 18 23 0> , <&sdma2 19 23 0>, > + <&sdma2 20 23 0> , <&sdma2 21 23 0>, > + <&sdma2 22 23 0> , <&sdma2 23 23 0>; > + dma-names = "ctx0_rx", "ctx0_tx", > + "ctx1_rx", "ctx1_tx", > + "ctx2_rx", "ctx2_tx", > + "ctx3_rx", "ctx3_tx"; > + firmware-name = "imx/easrc/easrc-imx8mn.bin"; > + fsl,asrc-rate = <8000>; > + fsl,asrc-format = <2>; > + status = "disabled"; > + }; > + }; > + > gpio1: gpio@30200000 { > compatible = "fsl,imx8mn-gpio", "fsl,imx35-gpio"; > reg = <0x30200000 0x10000>; > -- > 2.25.1 >
On Wed, Nov 18, 2020 at 5:13 PM Adam Ford <aford173@gmail.com> wrote: > > On Sat, Nov 7, 2020 at 5:58 AM Adam Ford <aford173@gmail.com> wrote: > > > > The driver exists for the Enhanced Asynchronous Sample Rate Converter > > (EASRC) Controller, but there isn't a device tree entry for it. > > > > On the vendor kernel, they put this on a spba-bus for SDMA support. > > > > Add the node for the spba-bus with the easrc node inside. > > > > Signed-off-by: Adam Ford <aford173@gmail.com> > > Shawn, > > I split the dt-binding into a separate patch since I was struggling > with checking the yaml syntax. Rob helped me find the proper branch > to use. I hope it goes through this time. > > Do you have any comments on the rest of the series? I would like to > fix them if you have any concerns so I can resend if/when the > dt-binding is accepted. Shawn, The dt-binding was accepted per [1]. How do you want me to proceed for the rest of the series? I can resend the other parts without the dt-binding if you like. thanks, adam [1] - https://lkml.org/lkml/2020/11/30/1211 > > thanks, > > adam > > > --- > > V4: No change > > V3: Change spba-bus@30000000 to spba: bus@30000000 > > V2: Make the DT node more in-line with the dt binding and remove > > vendor customizations that are not applicable. > > arch/arm64/boot/dts/freescale/imx8mn.dtsi | 28 +++++++++++++++++++++++ > > 1 file changed, 28 insertions(+) > > > > diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi > > index a06d2a6268e6..61560c083300 100644 > > --- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi > > +++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi > > @@ -253,6 +253,34 @@ aips1: bus@30000000 { > > #size-cells = <1>; > > ranges; > > > > + spba: bus@30000000 { > > + compatible = "fsl,spba-bus", "simple-bus"; > > + #address-cells = <1>; > > + #size-cells = <1>; > > + reg = <0x30000000 0x100000>; > > + ranges; > > + > > + easrc: easrc@300c0000 { > > + compatible = "fsl,imx8mn-easrc"; > > + reg = <0x300c0000 0x10000>; > > + interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; > > + clocks = <&clk IMX8MN_CLK_ASRC_ROOT>; > > + clock-names = "mem"; > > + dmas = <&sdma2 16 23 0> , <&sdma2 17 23 0>, > > + <&sdma2 18 23 0> , <&sdma2 19 23 0>, > > + <&sdma2 20 23 0> , <&sdma2 21 23 0>, > > + <&sdma2 22 23 0> , <&sdma2 23 23 0>; > > + dma-names = "ctx0_rx", "ctx0_tx", > > + "ctx1_rx", "ctx1_tx", > > + "ctx2_rx", "ctx2_tx", > > + "ctx3_rx", "ctx3_tx"; > > + firmware-name = "imx/easrc/easrc-imx8mn.bin"; > > + fsl,asrc-rate = <8000>; > > + fsl,asrc-format = <2>; > > + status = "disabled"; > > + }; > > + }; > > + > > gpio1: gpio@30200000 { > > compatible = "fsl,imx8mn-gpio", "fsl,imx35-gpio"; > > reg = <0x30200000 0x10000>; > > -- > > 2.25.1 > >
On Mon, Nov 30, 2020 at 06:08:25PM -0600, Adam Ford wrote: > On Wed, Nov 18, 2020 at 5:13 PM Adam Ford <aford173@gmail.com> wrote: > > > > On Sat, Nov 7, 2020 at 5:58 AM Adam Ford <aford173@gmail.com> wrote: > > > > > > The driver exists for the Enhanced Asynchronous Sample Rate Converter > > > (EASRC) Controller, but there isn't a device tree entry for it. > > > > > > On the vendor kernel, they put this on a spba-bus for SDMA support. > > > > > > Add the node for the spba-bus with the easrc node inside. > > > > > > Signed-off-by: Adam Ford <aford173@gmail.com> > > > > Shawn, > > > > I split the dt-binding into a separate patch since I was struggling > > with checking the yaml syntax. Rob helped me find the proper branch > > to use. I hope it goes through this time. > > > > Do you have any comments on the rest of the series? I would like to > > fix them if you have any concerns so I can resend if/when the > > dt-binding is accepted. > > Shawn, > > The dt-binding was accepted per [1]. How do you want me to proceed > for the rest of the series? I can resend the other parts without the > dt-binding if you like. Applied 4 DTS patches, thanks.
diff --git a/Documentation/devicetree/bindings/bus/fsl,spba-bus.yaml b/Documentation/devicetree/bindings/bus/fsl,spba-bus.yaml new file mode 100644 index 000000000000..d1037acd2734 --- /dev/null +++ b/Documentation/devicetree/bindings/bus/fsl,spba-bus.yaml @@ -0,0 +1,66 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/bus/simple-pm-bus.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Shared Peripherals Bus Interface + +maintainers: + - Shawn Guo <shawnguo@kernel.org> + +description: | + A simple bus enabling access to shared peripherals. + + The "spba-bus" follows the "simple-bus" set of properties, as + specified in the Devicetree Specification. It is an extension of + "simple-bus" because the SDMA controller uses this compatible flag to + determine which peripherals are available to it and the range over which + the SDMA can access. There are no special clocks for the bus, because + the SDMA controller itself has its interrupt, and clock assignments. + +select: + properties: + compatible: + contains: + const: fsl,spba-bus + required: + - compatible + +properties: + $nodename: + pattern: "^bus(@[0-9a-f]+)?$" + + compatible: + contains: + const: fsl,spba-bus + items: + - const: fsl,spba-bus + - const: simple-bus + + '#address-cells': + enum: [ 1, 2 ] + + '#size-cells': + enum: [ 1, 2 ] + + ranges: true + +required: + - compatible + - '#address-cells' + - '#size-cells' + - ranges + +additionalProperties: true + +type: object + +examples: + - | + bus { + compatible = "fsl,spba-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + };
Add binding doc for fsl,spba-bus. Signed-off-by: Adam Ford <aford173@gmail.com> --- V4: Correct errors in YAML V3: New to series .../devicetree/bindings/bus/fsl,spba-bus.yaml | 66 +++++++++++++++++++ 1 file changed, 66 insertions(+)