Message ID | 20200905080920.13396-3-yong.wu@mediatek.com |
---|---|
State | Changes Requested, archived |
Headers | show |
Series | MT8192 IOMMU support | expand |
Context | Check | Description |
---|---|---|
robh/dt-meta-schema | success | |
robh/checkpatch | warning | total: 0 errors, 4 warnings, 181 lines checked |
On Sat, Sep 05, 2020 at 04:08:59PM +0800, Yong Wu wrote: > Convert MediaTek SMI to DT schema. > > Signed-off-by: Yong Wu <yong.wu@mediatek.com> > --- > .../mediatek,smi-common.txt | 49 ---------- > .../mediatek,smi-common.yaml | 96 +++++++++++++++++++ > .../memory-controllers/mediatek,smi-larb.txt | 49 ---------- > .../memory-controllers/mediatek,smi-larb.yaml | 85 ++++++++++++++++ > 4 files changed, 181 insertions(+), 98 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt > create mode 100644 Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml > delete mode 100644 Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt > create mode 100644 Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml > > diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt > deleted file mode 100644 > index b64573680b42..000000000000 > --- a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt > +++ /dev/null > @@ -1,49 +0,0 @@ > -SMI (Smart Multimedia Interface) Common > - > -The hardware block diagram please check bindings/iommu/mediatek,iommu.txt > - > -Mediatek SMI have two generations of HW architecture, here is the list > -which generation the SoCs use: > -generation 1: mt2701 and mt7623. > -generation 2: mt2712, mt6779, mt8173 and mt8183. > - > -There's slight differences between the two SMI, for generation 2, the > -register which control the iommu port is at each larb's register base. But > -for generation 1, the register is at smi ao base(smi always on register > -base). Besides that, the smi async clock should be prepared and enabled for > -SMI generation 1 to transform the smi clock into emi clock domain, but that is > -not needed for SMI generation 2. > - > -Required properties: > -- compatible : must be one of : > - "mediatek,mt2701-smi-common" > - "mediatek,mt2712-smi-common" > - "mediatek,mt6779-smi-common" > - "mediatek,mt7623-smi-common", "mediatek,mt2701-smi-common" > - "mediatek,mt8173-smi-common" > - "mediatek,mt8183-smi-common" > -- reg : the register and size of the SMI block. > -- power-domains : a phandle to the power domain of this local arbiter. > -- clocks : Must contain an entry for each entry in clock-names. > -- clock-names : must contain 3 entries for generation 1 smi HW and 2 entries > - for generation 2 smi HW as follows: > - - "apb" : Advanced Peripheral Bus clock, It's the clock for setting > - the register. > - - "smi" : It's the clock for transfer data and command. > - They may be the same if both source clocks are the same. > - - "async" : asynchronous clock, it help transform the smi clock into the emi > - clock domain, this clock is only needed by generation 1 smi HW. > - and these 2 option clocks for generation 2 smi HW: > - - "gals0": the path0 clock of GALS(Global Async Local Sync). > - - "gals1": the path1 clock of GALS(Global Async Local Sync). > - Here is the list which has this GALS: mt6779 and mt8183. > - > -Example: > - smi_common: smi@14022000 { > - compatible = "mediatek,mt8173-smi-common"; > - reg = <0 0x14022000 0 0x1000>; > - power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; > - clocks = <&mmsys CLK_MM_SMI_COMMON>, > - <&mmsys CLK_MM_SMI_COMMON>; > - clock-names = "apb", "smi"; > - }; > diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml > new file mode 100644 > index 000000000000..781d7b7617d9 > --- /dev/null > +++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml > @@ -0,0 +1,96 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/memory-controllers/mediatek,smi-common.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: SMI (Smart Multimedia Interface) Common > + > +maintainers: > + - Yong Wu <yong.wu@mediatek.com> > + > +description: |+ > + The hardware block diagram please check bindings/iommu/mediatek,iommu.yaml > + > + MediaTek SMI have two generations of HW architecture, here is the list > + which generation the SoCs use: > + generation 1: mt2701 and mt7623. > + generation 2: mt2712, mt6779, mt8173 and mt8183. > + > + There's slight differences between the two SMI, for generation 2, the > + register which control the iommu port is at each larb's register base. But > + for generation 1, the register is at smi ao base(smi always on register > + base). Besides that, the smi async clock should be prepared and enabled for > + SMI generation 1 to transform the smi clock into emi clock domain, but that is > + not needed for SMI generation 2. > + > +properties: > + compatible: > + enum: > + - mediatek,mt2701-smi-common > + - mediatek,mt2712-smi-common > + - mediatek,mt6779-smi-common > + - mediatek,mt7623-smi-common, mediatek,mt2701-smi-common Same problem here. > + - mediatek,mt8173-smi-common > + - mediatek,mt8183-smi-common > + > + reg: > + maxItems: 1 > + > + clocks: > + description: | > + apb and smi are mandatory. the async is only for generation 1 smi HW. > + gals(global async local sync) also is optional, here is the list which > + require gals: mt6779 and mt8183. > + minItems: 2 > + maxItems: 4 > + items: > + - description: apb is Advanced Peripheral Bus clock, It's the clock for > + setting the register. > + - description: smi is the clock for transfer data and command. > + - description: async is asynchronous clock, it help transform the smi clock > + into the emi clock domain. > + - description: gals0 is the path0 clock of gals. > + - description: gals1 is the path1 clock of gals. > + > + clock-names: > + oneOf: > + - items: > + - const: apb > + - const: smi > + - items: > + - const: apb > + - const: smi > + - const: async > + - items: > + - const: apb > + - const: smi > + - const: gals0 > + - const: gals1 > + > + power-domains: > + maxItems: 1 > + > +required: > + - compatible > + - reg > + - clocks > + - clock-names > + - power-domains > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/clock/mt8173-clk.h> > + #include <dt-bindings/power/mt8173-power.h> > + > + smi_common: smi@14022000 { > + compatible = "mediatek,mt8173-smi-common"; > + reg = <0x14022000 0x1000>; > + power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; > + clocks = <&mmsys CLK_MM_SMI_COMMON>, > + <&mmsys CLK_MM_SMI_COMMON>; > + clock-names = "apb", "smi"; > + }; > + > diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt > deleted file mode 100644 > index 8f19dfe7d80e..000000000000 > --- a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt > +++ /dev/null > @@ -1,49 +0,0 @@ > -SMI (Smart Multimedia Interface) Local Arbiter > - > -The hardware block diagram please check bindings/iommu/mediatek,iommu.txt > - > -Required properties: > -- compatible : must be one of : > - "mediatek,mt2701-smi-larb" > - "mediatek,mt2712-smi-larb" > - "mediatek,mt6779-smi-larb" > - "mediatek,mt7623-smi-larb", "mediatek,mt2701-smi-larb" > - "mediatek,mt8173-smi-larb" > - "mediatek,mt8183-smi-larb" > -- reg : the register and size of this local arbiter. > -- mediatek,smi : a phandle to the smi_common node. > -- power-domains : a phandle to the power domain of this local arbiter. > -- clocks : Must contain an entry for each entry in clock-names. > -- clock-names: must contain 2 entries, as follows: > - - "apb" : Advanced Peripheral Bus clock, It's the clock for setting > - the register. > - - "smi" : It's the clock for transfer data and command. > - and this optional clock name: > - - "gals": the clock for GALS(Global Async Local Sync). > - Here is the list which has this GALS: mt8183. > - > -Required property for mt2701, mt2712, mt6779 and mt7623: > -- mediatek,larb-id :the hardware id of this larb. > - > -Example: > - larb1: larb@16010000 { > - compatible = "mediatek,mt8173-smi-larb"; > - reg = <0 0x16010000 0 0x1000>; > - mediatek,smi = <&smi_common>; > - power-domains = <&scpsys MT8173_POWER_DOMAIN_VDEC>; > - clocks = <&vdecsys CLK_VDEC_CKEN>, > - <&vdecsys CLK_VDEC_LARB_CKEN>; > - clock-names = "apb", "smi"; > - }; > - > -Example for mt2701: > - larb0: larb@14010000 { > - compatible = "mediatek,mt2701-smi-larb"; > - reg = <0 0x14010000 0 0x1000>; > - mediatek,smi = <&smi_common>; > - mediatek,larb-id = <0>; > - clocks = <&mmsys CLK_MM_SMI_LARB0>, > - <&mmsys CLK_MM_SMI_LARB0>; > - clock-names = "apb", "smi"; > - power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>; > - }; > diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml > new file mode 100644 > index 000000000000..e8919f280c84 > --- /dev/null > +++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml > @@ -0,0 +1,85 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/memory-controllers/mediatek,smi-larb.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: SMI (Smart Multimedia Interface) Local Arbiter > + > +maintainers: > + - Yong Wu <yong.wu@mediatek.com> > + > +description: |+ > + The hardware block diagram please check bindings/iommu/mediatek,iommu.yaml > + > +properties: > + compatible: > + enum: > + - mediatek,mt2701-smi-larb > + - mediatek,mt2712-smi-larb > + - mediatek,mt6779-smi-larb > + - mediatek,mt7623-smi-larb, mediatek,mt2701-smi-larb And here. > + - mediatek,mt8173-smi-larb > + - mediatek,mt8183-smi-larb > + > + reg: > + maxItems: 1 > + > + clocks: > + description: | > + apb and smi are mandatory. gals(global async local sync) is optional, > + here is the list which require gals: mt8183. > + minItems: 2 > + maxItems: 3 > + items: > + - description: apb is Advanced Peripheral Bus clock, It's the clock for > + setting the register. > + - description: smi is the clock for transfer data and command. > + - description: the clock for gals. > + > + clock-names: > + oneOf: > + - items: > + - const: apb > + - const: smi > + - items: > + - const: apb > + - const: smi > + - const: gals > + > + power-domains: > + maxItems: 1 > + > + mediatek,smi: > + $ref: /schemas/types.yaml#/definitions/phandle-array > + description: a phandle to the smi_common node. > + > + mediatek,larb-id: > + $ref: /schemas/types.yaml#/definitions/uint32 > + description: the hardware id of this larb. > + Required property for mt2701, mt2712, mt6779 and mt7623. Is there a set of valid values? > + > +required: > + - compatible > + - reg > + - clocks > + - clock-names > + - power-domains > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/clock/mt8173-clk.h> > + #include <dt-bindings/power/mt8173-power.h> > + > + larb1: larb@16010000 { > + compatible = "mediatek,mt8173-smi-larb"; > + reg = <0x16010000 0x1000>; > + mediatek,smi = <&smi_common>; > + power-domains = <&scpsys MT8173_POWER_DOMAIN_VDEC>; > + clocks = <&vdecsys CLK_VDEC_CKEN>, > + <&vdecsys CLK_VDEC_LARB_CKEN>; > + clock-names = "apb", "smi"; > + }; > + > -- > 2.18.0
On Mon, 2020-09-14 at 17:23 -0600, Rob Herring wrote: > On Sat, Sep 05, 2020 at 04:08:59PM +0800, Yong Wu wrote: > > Convert MediaTek SMI to DT schema. > > > > Signed-off-by: Yong Wu <yong.wu@mediatek.com> > > --- > > .../mediatek,smi-common.txt | 49 ---------- > > .../mediatek,smi-common.yaml | 96 +++++++++++++++++++ > > .../memory-controllers/mediatek,smi-larb.txt | 49 ---------- > > .../memory-controllers/mediatek,smi-larb.yaml | 85 ++++++++++++++++ [...] > > + mediatek,smi: > > + $ref: /schemas/types.yaml#/definitions/phandle-array > > + description: a phandle to the smi_common node. > > + > > + mediatek,larb-id: > > + $ref: /schemas/types.yaml#/definitions/uint32 > > + description: the hardware id of this larb. > > + Required property for mt2701, mt2712, mt6779 and mt7623. > > Is there a set of valid values? In the patch[4/23], I change the larb_nr to 32. normally this id is from 0 to 31. I will add this in next version: minimum: 0 maximum: 31 > > > + > > +required: > > + - compatible > > + - reg > > + - clocks > > + - clock-names > > + - power-domains > > + > > +additionalProperties: false > > + > > +examples: > > + - | > > + #include <dt-bindings/clock/mt8173-clk.h> > > + #include <dt-bindings/power/mt8173-power.h> > > + > > + larb1: larb@16010000 { > > + compatible = "mediatek,mt8173-smi-larb"; > > + reg = <0x16010000 0x1000>; > > + mediatek,smi = <&smi_common>; > > + power-domains = <&scpsys MT8173_POWER_DOMAIN_VDEC>; > > + clocks = <&vdecsys CLK_VDEC_CKEN>, > > + <&vdecsys CLK_VDEC_LARB_CKEN>; > > + clock-names = "apb", "smi"; > > + }; > > + > > -- > > 2.18.0
diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt deleted file mode 100644 index b64573680b42..000000000000 --- a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt +++ /dev/null @@ -1,49 +0,0 @@ -SMI (Smart Multimedia Interface) Common - -The hardware block diagram please check bindings/iommu/mediatek,iommu.txt - -Mediatek SMI have two generations of HW architecture, here is the list -which generation the SoCs use: -generation 1: mt2701 and mt7623. -generation 2: mt2712, mt6779, mt8173 and mt8183. - -There's slight differences between the two SMI, for generation 2, the -register which control the iommu port is at each larb's register base. But -for generation 1, the register is at smi ao base(smi always on register -base). Besides that, the smi async clock should be prepared and enabled for -SMI generation 1 to transform the smi clock into emi clock domain, but that is -not needed for SMI generation 2. - -Required properties: -- compatible : must be one of : - "mediatek,mt2701-smi-common" - "mediatek,mt2712-smi-common" - "mediatek,mt6779-smi-common" - "mediatek,mt7623-smi-common", "mediatek,mt2701-smi-common" - "mediatek,mt8173-smi-common" - "mediatek,mt8183-smi-common" -- reg : the register and size of the SMI block. -- power-domains : a phandle to the power domain of this local arbiter. -- clocks : Must contain an entry for each entry in clock-names. -- clock-names : must contain 3 entries for generation 1 smi HW and 2 entries - for generation 2 smi HW as follows: - - "apb" : Advanced Peripheral Bus clock, It's the clock for setting - the register. - - "smi" : It's the clock for transfer data and command. - They may be the same if both source clocks are the same. - - "async" : asynchronous clock, it help transform the smi clock into the emi - clock domain, this clock is only needed by generation 1 smi HW. - and these 2 option clocks for generation 2 smi HW: - - "gals0": the path0 clock of GALS(Global Async Local Sync). - - "gals1": the path1 clock of GALS(Global Async Local Sync). - Here is the list which has this GALS: mt6779 and mt8183. - -Example: - smi_common: smi@14022000 { - compatible = "mediatek,mt8173-smi-common"; - reg = <0 0x14022000 0 0x1000>; - power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; - clocks = <&mmsys CLK_MM_SMI_COMMON>, - <&mmsys CLK_MM_SMI_COMMON>; - clock-names = "apb", "smi"; - }; diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml new file mode 100644 index 000000000000..781d7b7617d9 --- /dev/null +++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml @@ -0,0 +1,96 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/memory-controllers/mediatek,smi-common.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: SMI (Smart Multimedia Interface) Common + +maintainers: + - Yong Wu <yong.wu@mediatek.com> + +description: |+ + The hardware block diagram please check bindings/iommu/mediatek,iommu.yaml + + MediaTek SMI have two generations of HW architecture, here is the list + which generation the SoCs use: + generation 1: mt2701 and mt7623. + generation 2: mt2712, mt6779, mt8173 and mt8183. + + There's slight differences between the two SMI, for generation 2, the + register which control the iommu port is at each larb's register base. But + for generation 1, the register is at smi ao base(smi always on register + base). Besides that, the smi async clock should be prepared and enabled for + SMI generation 1 to transform the smi clock into emi clock domain, but that is + not needed for SMI generation 2. + +properties: + compatible: + enum: + - mediatek,mt2701-smi-common + - mediatek,mt2712-smi-common + - mediatek,mt6779-smi-common + - mediatek,mt7623-smi-common, mediatek,mt2701-smi-common + - mediatek,mt8173-smi-common + - mediatek,mt8183-smi-common + + reg: + maxItems: 1 + + clocks: + description: | + apb and smi are mandatory. the async is only for generation 1 smi HW. + gals(global async local sync) also is optional, here is the list which + require gals: mt6779 and mt8183. + minItems: 2 + maxItems: 4 + items: + - description: apb is Advanced Peripheral Bus clock, It's the clock for + setting the register. + - description: smi is the clock for transfer data and command. + - description: async is asynchronous clock, it help transform the smi clock + into the emi clock domain. + - description: gals0 is the path0 clock of gals. + - description: gals1 is the path1 clock of gals. + + clock-names: + oneOf: + - items: + - const: apb + - const: smi + - items: + - const: apb + - const: smi + - const: async + - items: + - const: apb + - const: smi + - const: gals0 + - const: gals1 + + power-domains: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - clock-names + - power-domains + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/mt8173-clk.h> + #include <dt-bindings/power/mt8173-power.h> + + smi_common: smi@14022000 { + compatible = "mediatek,mt8173-smi-common"; + reg = <0x14022000 0x1000>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + clocks = <&mmsys CLK_MM_SMI_COMMON>, + <&mmsys CLK_MM_SMI_COMMON>; + clock-names = "apb", "smi"; + }; + diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt deleted file mode 100644 index 8f19dfe7d80e..000000000000 --- a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt +++ /dev/null @@ -1,49 +0,0 @@ -SMI (Smart Multimedia Interface) Local Arbiter - -The hardware block diagram please check bindings/iommu/mediatek,iommu.txt - -Required properties: -- compatible : must be one of : - "mediatek,mt2701-smi-larb" - "mediatek,mt2712-smi-larb" - "mediatek,mt6779-smi-larb" - "mediatek,mt7623-smi-larb", "mediatek,mt2701-smi-larb" - "mediatek,mt8173-smi-larb" - "mediatek,mt8183-smi-larb" -- reg : the register and size of this local arbiter. -- mediatek,smi : a phandle to the smi_common node. -- power-domains : a phandle to the power domain of this local arbiter. -- clocks : Must contain an entry for each entry in clock-names. -- clock-names: must contain 2 entries, as follows: - - "apb" : Advanced Peripheral Bus clock, It's the clock for setting - the register. - - "smi" : It's the clock for transfer data and command. - and this optional clock name: - - "gals": the clock for GALS(Global Async Local Sync). - Here is the list which has this GALS: mt8183. - -Required property for mt2701, mt2712, mt6779 and mt7623: -- mediatek,larb-id :the hardware id of this larb. - -Example: - larb1: larb@16010000 { - compatible = "mediatek,mt8173-smi-larb"; - reg = <0 0x16010000 0 0x1000>; - mediatek,smi = <&smi_common>; - power-domains = <&scpsys MT8173_POWER_DOMAIN_VDEC>; - clocks = <&vdecsys CLK_VDEC_CKEN>, - <&vdecsys CLK_VDEC_LARB_CKEN>; - clock-names = "apb", "smi"; - }; - -Example for mt2701: - larb0: larb@14010000 { - compatible = "mediatek,mt2701-smi-larb"; - reg = <0 0x14010000 0 0x1000>; - mediatek,smi = <&smi_common>; - mediatek,larb-id = <0>; - clocks = <&mmsys CLK_MM_SMI_LARB0>, - <&mmsys CLK_MM_SMI_LARB0>; - clock-names = "apb", "smi"; - power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>; - }; diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml new file mode 100644 index 000000000000..e8919f280c84 --- /dev/null +++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml @@ -0,0 +1,85 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/memory-controllers/mediatek,smi-larb.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: SMI (Smart Multimedia Interface) Local Arbiter + +maintainers: + - Yong Wu <yong.wu@mediatek.com> + +description: |+ + The hardware block diagram please check bindings/iommu/mediatek,iommu.yaml + +properties: + compatible: + enum: + - mediatek,mt2701-smi-larb + - mediatek,mt2712-smi-larb + - mediatek,mt6779-smi-larb + - mediatek,mt7623-smi-larb, mediatek,mt2701-smi-larb + - mediatek,mt8173-smi-larb + - mediatek,mt8183-smi-larb + + reg: + maxItems: 1 + + clocks: + description: | + apb and smi are mandatory. gals(global async local sync) is optional, + here is the list which require gals: mt8183. + minItems: 2 + maxItems: 3 + items: + - description: apb is Advanced Peripheral Bus clock, It's the clock for + setting the register. + - description: smi is the clock for transfer data and command. + - description: the clock for gals. + + clock-names: + oneOf: + - items: + - const: apb + - const: smi + - items: + - const: apb + - const: smi + - const: gals + + power-domains: + maxItems: 1 + + mediatek,smi: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: a phandle to the smi_common node. + + mediatek,larb-id: + $ref: /schemas/types.yaml#/definitions/uint32 + description: the hardware id of this larb. + Required property for mt2701, mt2712, mt6779 and mt7623. + +required: + - compatible + - reg + - clocks + - clock-names + - power-domains + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/mt8173-clk.h> + #include <dt-bindings/power/mt8173-power.h> + + larb1: larb@16010000 { + compatible = "mediatek,mt8173-smi-larb"; + reg = <0x16010000 0x1000>; + mediatek,smi = <&smi_common>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_VDEC>; + clocks = <&vdecsys CLK_VDEC_CKEN>, + <&vdecsys CLK_VDEC_LARB_CKEN>; + clock-names = "apb", "smi"; + }; +
Convert MediaTek SMI to DT schema. Signed-off-by: Yong Wu <yong.wu@mediatek.com> --- .../mediatek,smi-common.txt | 49 ---------- .../mediatek,smi-common.yaml | 96 +++++++++++++++++++ .../memory-controllers/mediatek,smi-larb.txt | 49 ---------- .../memory-controllers/mediatek,smi-larb.yaml | 85 ++++++++++++++++ 4 files changed, 181 insertions(+), 98 deletions(-) delete mode 100644 Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt create mode 100644 Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml delete mode 100644 Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt create mode 100644 Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml