| Message ID | 20200827150640.267f6edc@xhacker.debian |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
| Series | dt-bindings: regulator: Convert mp886x to json-schema | expand |
| Context | Check | Description |
|---|---|---|
| robh/checkpatch | warning | total: 0 errors, 2 warnings, 61 lines checked |
On Thu, 27 Aug 2020 15:06:40 +0800, Jisheng Zhang wrote: > Convert the mp886x binding to DT schema format using json-schema. > > Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> > --- > .../devicetree/bindings/regulator/mp886x.txt | 31 ---------- > .../bindings/regulator/mps,mp886x.yaml | 61 +++++++++++++++++++ > 2 files changed, 61 insertions(+), 31 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/regulator/mp886x.txt > create mode 100644 Documentation/devicetree/bindings/regulator/mps,mp886x.yaml > Reviewed-by: Rob Herring <robh@kernel.org>
On Thu, 27 Aug 2020 15:06:40 +0800, Jisheng Zhang wrote:
> Convert the mp886x binding to DT schema format using json-schema.
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-next
Thanks!
[1/1] dt-bindings: regulator: Convert mp886x to json-schema
commit: fd24adf887e490fd10a9a6bb9d76854e87c235f8
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
diff --git a/Documentation/devicetree/bindings/regulator/mp886x.txt b/Documentation/devicetree/bindings/regulator/mp886x.txt deleted file mode 100644 index b05307bbb0d9..000000000000 --- a/Documentation/devicetree/bindings/regulator/mp886x.txt +++ /dev/null @@ -1,31 +0,0 @@ -Monolithic Power Systems MP8867/MP8869 voltage regulator - -Required properties: -- compatible: Must be one of the following. - "mps,mp8867" - "mps,mp8869" -- reg: I2C slave address. -- enable-gpios: enable gpios. -- mps,fb-voltage-divider: An array of two integers containing the resistor - values R1 and R2 of the feedback voltage divider in kilo ohms. - -Optional properties: -- mps,switch-frequency-hz: The valid switch frequency in Hertz. Available values - are: 500000, 750000, 1000000, 1250000, 1500000 - -Any property defined as part of the core regulator binding, defined in -./regulator.txt, can also be used. - -Example: - - vcpu: regulator@62 { - compatible = "mps,mp8869"; - regulator-name = "vcpu"; - regulator-min-microvolt = <700000>; - regulator-max-microvolt = <850000>; - regulator-always-on; - regulator-boot-on; - enable-gpios = <&porta 1 GPIO_ACTIVE_LOW>; - mps,fb-voltage-divider = <80 240>; - reg = <0x62>; - }; diff --git a/Documentation/devicetree/bindings/regulator/mps,mp886x.yaml b/Documentation/devicetree/bindings/regulator/mps,mp886x.yaml new file mode 100644 index 000000000000..ba175b30f468 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/mps,mp886x.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/mps,mp886x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Monolithic Power Systems MP8867/MP8869 voltage regulator + +maintainers: + - Jisheng Zhang <jszhang@kernel.org> + +allOf: + - $ref: regulator.yaml# + +properties: + compatible: + enum: + - mps,mp8867 + - mps,mp8869 + + reg: + maxItems: 1 + + enable-gpios: + description: GPIO to enable/disable the regulator. + maxItems: 1 + + mps,fb-voltage-divider: + description: An array of two integers containing the resistor + values R1 and R2 of the feedback voltage divider in kilo ohms. + $ref: "/schemas/types.yaml#/definitions/uint32-array" + maxItems: 2 + + mps,switch-frequency-hz: + description: The valid switch frequency in Hertz. + enum: [500000, 750000, 1000000, 1250000, 1500000] + +required: + - compatible + - reg + - enable-gpios + - mps,fb-voltage-divider + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + regulator@62 { + compatible = "mps,mp8869"; + regulator-name = "vcpu"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1150000>; + enable-gpios = <&porta 1 GPIO_ACTIVE_LOW>; + mps,fb-voltage-divider = <80 240>; + reg = <0x62>; + }; + }; + +...
Convert the mp886x binding to DT schema format using json-schema. Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> --- .../devicetree/bindings/regulator/mp886x.txt | 31 ---------- .../bindings/regulator/mps,mp886x.yaml | 61 +++++++++++++++++++ 2 files changed, 61 insertions(+), 31 deletions(-) delete mode 100644 Documentation/devicetree/bindings/regulator/mp886x.txt create mode 100644 Documentation/devicetree/bindings/regulator/mps,mp886x.yaml