Message ID | 20200817191723.22416-2-r-rivera-matos@ti.com |
---|---|
State | Changes Requested, archived |
Headers | show |
Series | Introduce the BQ256XX family of chargers | expand |
Context | Check | Description |
---|---|---|
robh/checkpatch | success | |
robh/dt-meta-schema | fail | build log |
On Mon, 17 Aug 2020 14:17:22 -0500, Ricardo Rivera-Matos wrote: > Add the bindings for the bq256xx series of battery charging ICs. > > Datasheets: > - https://www.ti.com/lit/ds/symlink/bq25600.pdf > - https://www.ti.com/lit/ds/symlink/bq25601.pdf > - https://www.ti.com/lit/ds/symlink/bq25600d.pdf > - https://www.ti.com/lit/ds/symlink/bq25601d.pdf > - https://www.ti.com/lit/ds/symlink/bq25611d.pdf > - https://www.ti.com/lit/ds/symlink/bq25618.pdf > - https://www.ti.com/lit/ds/symlink/bq25619.pdf > > Signed-off-by: Ricardo Rivera-Matos <r-rivera-matos@ti.com> > --- > .../bindings/power/supply/bq256xx.yaml | 99 +++++++++++++++++++ > 1 file changed, 99 insertions(+) > create mode 100644 Documentation/devicetree/bindings/power/supply/bq256xx.yaml > My bot found errors running 'make dt_binding_check' on your patch: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/power/supply/bq256xx.example.dt.yaml: battery: 'termination-current-microamp' does not match any of the regexes: '^ocv-capacity-table-[0-9]+$', 'pinctrl-[0-9]+' See https://patchwork.ozlabs.org/patch/1346479 If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure dt-schema is up to date: pip3 install git+https://github.com/devicetree-org/dt-schema.git@master --upgrade Please check and re-submit.
On Mon, Aug 17, 2020 at 02:17:22PM -0500, Ricardo Rivera-Matos wrote: > Add the bindings for the bq256xx series of battery charging ICs. > > Datasheets: > - https://www.ti.com/lit/ds/symlink/bq25600.pdf > - https://www.ti.com/lit/ds/symlink/bq25601.pdf > - https://www.ti.com/lit/ds/symlink/bq25600d.pdf > - https://www.ti.com/lit/ds/symlink/bq25601d.pdf > - https://www.ti.com/lit/ds/symlink/bq25611d.pdf > - https://www.ti.com/lit/ds/symlink/bq25618.pdf > - https://www.ti.com/lit/ds/symlink/bq25619.pdf > > Signed-off-by: Ricardo Rivera-Matos <r-rivera-matos@ti.com> > --- > .../bindings/power/supply/bq256xx.yaml | 99 +++++++++++++++++++ > 1 file changed, 99 insertions(+) > create mode 100644 Documentation/devicetree/bindings/power/supply/bq256xx.yaml > > diff --git a/Documentation/devicetree/bindings/power/supply/bq256xx.yaml b/Documentation/devicetree/bindings/power/supply/bq256xx.yaml > new file mode 100644 > index 000000000000..67db4ba9fdb6 > --- /dev/null > +++ b/Documentation/devicetree/bindings/power/supply/bq256xx.yaml > @@ -0,0 +1,99 @@ > +# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) > +# Copyright (C) 2020 Texas Instruments Incorporated > +%YAML 1.2 > +--- > +$id: "http://devicetree.org/schemas/power/supply/bq256xx.yaml#" > +$schema: "http://devicetree.org/meta-schemas/core.yaml#" > + > +title: TI bq256xx Switch Mode Buck Charger > + > +maintainers: > + - Ricardo Rivera-Matos <r-rivera-matos@ti.com> > + > +description: | > + The bq256xx devices are a family of highly-integrated battery charge > + management and system power management ICs for single cell Li-ion and Li- > + polymer batteries. > + > + Datasheets: > + - https://www.ti.com/lit/ds/symlink/bq25600.pdf > + - https://www.ti.com/lit/ds/symlink/bq25601.pdf > + - https://www.ti.com/lit/ds/symlink/bq25600d.pdf > + - https://www.ti.com/lit/ds/symlink/bq25601d.pdf > + - https://www.ti.com/lit/ds/symlink/bq25611d.pdf > + - https://www.ti.com/lit/ds/symlink/bq25618.pdf > + - https://www.ti.com/lit/ds/symlink/bq25619.pdf > + > +properties: > + compatible: > + enum: > + - ti,bq25600 > + - ti,bq25601 > + - ti,bq25600d > + - ti,bq25601d > + - ti,bq25611d > + - ti,bq25618 > + - ti,bq25619 > + > + reg: > + maxItems: 1 > + > + ti,watchdog-timer: Poorly named since we have 'ti,watchdog-timers' already and is completely different. > + $ref: /schemas/types.yaml#/definitions/uint32 > + description: | > + Watchdog timer in milli seconds. 0 (default) disables the watchdog If you have units, then you should use standard unit suffix. > + minimum: 0 > + maximum: 160000 > + enum: [ 0, 40000, 80000, 160000] > + > + input-voltage-limit-microvolt: > + description: | > + Minimum input voltage limit in micro volts with a 100000 micro volt step > + minimum: 3900000 > + maximum: 5400000 > + > + input-current-limit-microamp: > + description: | > + Maximum input current limit in micro amps with a 100000 micro amp step > + minimum: 100000 > + maximum: 3200000 Aren't these properties of the battery, not the charger? > + > +required: > + - compatible > + - reg monitored-battery not required? Add: additionalProperties: false > + > +examples: > + - | > + bat: battery { > + compatible = "simple-battery"; > + constant-charge-current-max-microamp = <2040000>; > + constant-charge-voltage-max-microvolt = <4352000>; > + precharge-current-microamp = <180000>; > + termination-current-microamp = <180000>; > + }; > + #include <dt-bindings/gpio/gpio.h> > + #include <dt-bindings/interrupt-controller/irq.h> > + i2c0 { i2c { > + pinctrl-names = "default"; > + pinctrl-0 = <&i2c2_pins>; Not relevant to the example. > + > + status = "okay"; Don't show status in examples. > + clock-frequency = <400000>; > + > + #address-cells = <1>; > + #size-cells = <0>; > + > + bq25601@6b { charger@6b > + compatible = "ti,bq25601"; > + reg = <0x6b>; > + monitored-battery = <&bat>; > + > + interrupt-parent = <&gpio1>; > + interrupts = <16 IRQ_TYPE_EDGE_FALLING>; > + watchdog-timer = <40000>; > + > + input-voltage-limit-microvolt = <4500000>; > + input-current-limit-microamp = <2400000>; > + }; > + }; > +... > -- > 2.28.0 >
Rob On 8/18/20 11:43 AM, Rob Herring wrote: > On Mon, Aug 17, 2020 at 02:17:22PM -0500, Ricardo Rivera-Matos wrote: >> Add the bindings for the bq256xx series of battery charging ICs. >> >> Datasheets: >> - https://www.ti.com/lit/ds/symlink/bq25600.pdf >> - https://www.ti.com/lit/ds/symlink/bq25601.pdf >> - https://www.ti.com/lit/ds/symlink/bq25600d.pdf >> - https://www.ti.com/lit/ds/symlink/bq25601d.pdf >> - https://www.ti.com/lit/ds/symlink/bq25611d.pdf >> - https://www.ti.com/lit/ds/symlink/bq25618.pdf >> - https://www.ti.com/lit/ds/symlink/bq25619.pdf >> >> Signed-off-by: Ricardo Rivera-Matos <r-rivera-matos@ti.com> >> --- >> .../bindings/power/supply/bq256xx.yaml | 99 +++++++++++++++++++ >> 1 file changed, 99 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/power/supply/bq256xx.yaml >> >> diff --git a/Documentation/devicetree/bindings/power/supply/bq256xx.yaml b/Documentation/devicetree/bindings/power/supply/bq256xx.yaml >> new file mode 100644 >> index 000000000000..67db4ba9fdb6 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/power/supply/bq256xx.yaml >> @@ -0,0 +1,99 @@ >> +# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) >> +# Copyright (C) 2020 Texas Instruments Incorporated >> +%YAML 1.2 >> +--- >> +$id: "http://devicetree.org/schemas/power/supply/bq256xx.yaml#" >> +$schema: "http://devicetree.org/meta-schemas/core.yaml#" >> + >> +title: TI bq256xx Switch Mode Buck Charger >> + >> +maintainers: >> + - Ricardo Rivera-Matos <r-rivera-matos@ti.com> >> + >> +description: | >> + The bq256xx devices are a family of highly-integrated battery charge >> + management and system power management ICs for single cell Li-ion and Li- >> + polymer batteries. >> + >> + Datasheets: >> + - https://www.ti.com/lit/ds/symlink/bq25600.pdf >> + - https://www.ti.com/lit/ds/symlink/bq25601.pdf >> + - https://www.ti.com/lit/ds/symlink/bq25600d.pdf >> + - https://www.ti.com/lit/ds/symlink/bq25601d.pdf >> + - https://www.ti.com/lit/ds/symlink/bq25611d.pdf >> + - https://www.ti.com/lit/ds/symlink/bq25618.pdf >> + - https://www.ti.com/lit/ds/symlink/bq25619.pdf >> + >> +properties: >> + compatible: >> + enum: >> + - ti,bq25600 >> + - ti,bq25601 >> + - ti,bq25600d >> + - ti,bq25601d >> + - ti,bq25611d >> + - ti,bq25618 >> + - ti,bq25619 >> + >> + reg: >> + maxItems: 1 >> + >> + ti,watchdog-timer: > Poorly named since we have 'ti,watchdog-timers' already and is > completely different. I think you made a comment on my DT to make this ti,watchdog-timeout-ms and then we can remove the type. > >> + $ref: /schemas/types.yaml#/definitions/uint32 >> + description: | >> + Watchdog timer in milli seconds. 0 (default) disables the watchdog > If you have units, then you should use standard unit suffix. > >> + minimum: 0 >> + maximum: 160000 >> + enum: [ 0, 40000, 80000, 160000] >> + >> + input-voltage-limit-microvolt: >> + description: | >> + Minimum input voltage limit in micro volts with a 100000 micro volt step >> + minimum: 3900000 >> + maximum: 5400000 >> + >> + input-current-limit-microamp: >> + description: | >> + Maximum input current limit in micro amps with a 100000 micro amp step >> + minimum: 100000 >> + maximum: 3200000 > Aren't these properties of the battery, not the charger? > >> + >> +required: >> + - compatible >> + - reg > monitored-battery not required? > > Add: > > additionalProperties: false What about using unevaluatedProperties: false Dan
Rob On 8/18/20 11:43 AM, Rob Herring wrote: > On Mon, Aug 17, 2020 at 02:17:22PM -0500, Ricardo Rivera-Matos wrote: >> Add the bindings for the bq256xx series of battery charging ICs. >> >> Datasheets: >> - https://www.ti.com/lit/ds/symlink/bq25600.pdf >> - https://www.ti.com/lit/ds/symlink/bq25601.pdf >> - https://www.ti.com/lit/ds/symlink/bq25600d.pdf >> - https://www.ti.com/lit/ds/symlink/bq25601d.pdf >> - https://www.ti.com/lit/ds/symlink/bq25611d.pdf >> - https://www.ti.com/lit/ds/symlink/bq25618.pdf >> - https://www.ti.com/lit/ds/symlink/bq25619.pdf >> >> Signed-off-by: Ricardo Rivera-Matos <r-rivera-matos@ti.com> >> --- >> .../bindings/power/supply/bq256xx.yaml | 99 +++++++++++++++++++ >> 1 file changed, 99 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/power/supply/bq256xx.yaml >> >> diff --git a/Documentation/devicetree/bindings/power/supply/bq256xx.yaml b/Documentation/devicetree/bindings/power/supply/bq256xx.yaml >> new file mode 100644 >> index 000000000000..67db4ba9fdb6 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/power/supply/bq256xx.yaml >> @@ -0,0 +1,99 @@ >> +# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) >> +# Copyright (C) 2020 Texas Instruments Incorporated >> +%YAML 1.2 >> +--- >> +$id: "http://devicetree.org/schemas/power/supply/bq256xx.yaml#" >> +$schema: "http://devicetree.org/meta-schemas/core.yaml#" >> + >> +title: TI bq256xx Switch Mode Buck Charger >> + >> +maintainers: >> + - Ricardo Rivera-Matos <r-rivera-matos@ti.com> >> + >> +description: | >> + The bq256xx devices are a family of highly-integrated battery charge >> + management and system power management ICs for single cell Li-ion and Li- >> + polymer batteries. >> + >> + Datasheets: >> + - https://www.ti.com/lit/ds/symlink/bq25600.pdf >> + - https://www.ti.com/lit/ds/symlink/bq25601.pdf >> + - https://www.ti.com/lit/ds/symlink/bq25600d.pdf >> + - https://www.ti.com/lit/ds/symlink/bq25601d.pdf >> + - https://www.ti.com/lit/ds/symlink/bq25611d.pdf >> + - https://www.ti.com/lit/ds/symlink/bq25618.pdf >> + - https://www.ti.com/lit/ds/symlink/bq25619.pdf >> + >> +properties: >> + compatible: >> + enum: >> + - ti,bq25600 >> + - ti,bq25601 >> + - ti,bq25600d >> + - ti,bq25601d >> + - ti,bq25611d >> + - ti,bq25618 >> + - ti,bq25619 >> + >> + reg: >> + maxItems: 1 >> + >> + ti,watchdog-timer: > Poorly named since we have 'ti,watchdog-timers' already and is > completely different. ACK, will use ti,watchdog-timeout-ms instead > >> + $ref: /schemas/types.yaml#/definitions/uint32 >> + description: | >> + Watchdog timer in milli seconds. 0 (default) disables the watchdog > If you have units, then you should use standard unit suffix. ACK > >> + minimum: 0 >> + maximum: 160000 >> + enum: [ 0, 40000, 80000, 160000] >> + >> + input-voltage-limit-microvolt: >> + description: | >> + Minimum input voltage limit in micro volts with a 100000 micro volt step >> + minimum: 3900000 >> + maximum: 5400000 >> + >> + input-current-limit-microamp: >> + description: | >> + Maximum input current limit in micro amps with a 100000 micro amp step >> + minimum: 100000 >> + maximum: 3200000 > Aren't these properties of the battery, not the charger? These are input current and voltage limit for the charger, not the battery > >> + >> +required: >> + - compatible >> + - reg > monitored-battery not required? ACK > > Add: > > additionalProperties: false additionalProperties: false or unevaluatedProperties: false > > >> + >> +examples: >> + - | >> + bat: battery { >> + compatible = "simple-battery"; >> + constant-charge-current-max-microamp = <2040000>; >> + constant-charge-voltage-max-microvolt = <4352000>; >> + precharge-current-microamp = <180000>; >> + termination-current-microamp = <180000>; >> + }; >> + #include <dt-bindings/gpio/gpio.h> >> + #include <dt-bindings/interrupt-controller/irq.h> >> + i2c0 { > i2c { ACK > >> + pinctrl-names = "default"; >> + pinctrl-0 = <&i2c2_pins>; > Not relevant to the example. ACK > >> + >> + status = "okay"; > Don't show status in examples. ACK > >> + clock-frequency = <400000>; >> + >> + #address-cells = <1>; >> + #size-cells = <0>; >> + >> + bq25601@6b { > charger@6b ACK > >> + compatible = "ti,bq25601"; >> + reg = <0x6b>; >> + monitored-battery = <&bat>; >> + >> + interrupt-parent = <&gpio1>; >> + interrupts = <16 IRQ_TYPE_EDGE_FALLING>; >> + watchdog-timer = <40000>; >> + >> + input-voltage-limit-microvolt = <4500000>; >> + input-current-limit-microamp = <2400000>; >> + }; >> + }; >> +... >> -- >> 2.28.0 >> Ricardo
diff --git a/Documentation/devicetree/bindings/power/supply/bq256xx.yaml b/Documentation/devicetree/bindings/power/supply/bq256xx.yaml new file mode 100644 index 000000000000..67db4ba9fdb6 --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/bq256xx.yaml @@ -0,0 +1,99 @@ +# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +# Copyright (C) 2020 Texas Instruments Incorporated +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/power/supply/bq256xx.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: TI bq256xx Switch Mode Buck Charger + +maintainers: + - Ricardo Rivera-Matos <r-rivera-matos@ti.com> + +description: | + The bq256xx devices are a family of highly-integrated battery charge + management and system power management ICs for single cell Li-ion and Li- + polymer batteries. + + Datasheets: + - https://www.ti.com/lit/ds/symlink/bq25600.pdf + - https://www.ti.com/lit/ds/symlink/bq25601.pdf + - https://www.ti.com/lit/ds/symlink/bq25600d.pdf + - https://www.ti.com/lit/ds/symlink/bq25601d.pdf + - https://www.ti.com/lit/ds/symlink/bq25611d.pdf + - https://www.ti.com/lit/ds/symlink/bq25618.pdf + - https://www.ti.com/lit/ds/symlink/bq25619.pdf + +properties: + compatible: + enum: + - ti,bq25600 + - ti,bq25601 + - ti,bq25600d + - ti,bq25601d + - ti,bq25611d + - ti,bq25618 + - ti,bq25619 + + reg: + maxItems: 1 + + ti,watchdog-timer: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Watchdog timer in milli seconds. 0 (default) disables the watchdog + minimum: 0 + maximum: 160000 + enum: [ 0, 40000, 80000, 160000] + + input-voltage-limit-microvolt: + description: | + Minimum input voltage limit in micro volts with a 100000 micro volt step + minimum: 3900000 + maximum: 5400000 + + input-current-limit-microamp: + description: | + Maximum input current limit in micro amps with a 100000 micro amp step + minimum: 100000 + maximum: 3200000 + +required: + - compatible + - reg + +examples: + - | + bat: battery { + compatible = "simple-battery"; + constant-charge-current-max-microamp = <2040000>; + constant-charge-voltage-max-microvolt = <4352000>; + precharge-current-microamp = <180000>; + termination-current-microamp = <180000>; + }; + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + + status = "okay"; + clock-frequency = <400000>; + + #address-cells = <1>; + #size-cells = <0>; + + bq25601@6b { + compatible = "ti,bq25601"; + reg = <0x6b>; + monitored-battery = <&bat>; + + interrupt-parent = <&gpio1>; + interrupts = <16 IRQ_TYPE_EDGE_FALLING>; + watchdog-timer = <40000>; + + input-voltage-limit-microvolt = <4500000>; + input-current-limit-microamp = <2400000>; + }; + }; +...
Add the bindings for the bq256xx series of battery charging ICs. Datasheets: - https://www.ti.com/lit/ds/symlink/bq25600.pdf - https://www.ti.com/lit/ds/symlink/bq25601.pdf - https://www.ti.com/lit/ds/symlink/bq25600d.pdf - https://www.ti.com/lit/ds/symlink/bq25601d.pdf - https://www.ti.com/lit/ds/symlink/bq25611d.pdf - https://www.ti.com/lit/ds/symlink/bq25618.pdf - https://www.ti.com/lit/ds/symlink/bq25619.pdf Signed-off-by: Ricardo Rivera-Matos <r-rivera-matos@ti.com> --- .../bindings/power/supply/bq256xx.yaml | 99 +++++++++++++++++++ 1 file changed, 99 insertions(+) create mode 100644 Documentation/devicetree/bindings/power/supply/bq256xx.yaml