| Message ID | 20191127153928.22408-1-grygorii.strashko@ti.com |
|---|---|
| State | Changes Requested, archived |
| Headers | show |
| Series | dt-bindings: net: mdio: use non vendor specific compatible string in example | expand |
| Context | Check | Description |
|---|---|---|
| robh/checkpatch | success | |
| robh/dt-meta-schema | success |
On Wed, Nov 27, 2019 at 05:39:28PM +0200, Grygorii Strashko wrote: > Use non vendor specific compatible string in example, otherwise DT YAML > schemas validation may trigger warnings specific to TI ti,davinci_mdio > and not to the generic MDIO example. > > Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> This seems sensible to me. Reviewed-by: Simon Horman <simon.horman@netronome.com> Are there any plans to address the errors DT YAML schema validation reports? $ ARCH=arm make dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/net/mdio.yaml .../linux/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dt.yaml: mdio@18003000: #address-cells:0:0: 1 was expected .../linux/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dt.yaml: mdio@18003000: #size-cells:0:0: 0 was expected .../linux/arch/arm/boot/dts/bcm4708-netgear-r6250.dt.yaml: mdio@18003000: #address-cells:0:0: 1 was expected .../linux/arch/arm/boot/dts/bcm4708-netgear-r6250.dt.yaml: mdio@18003000: #size-cells:0:0: 0 was expected .../linux/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dt.yaml: mdio@18003000: #address-cells:0:0: 1 was expected .../linux/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dt.yaml: mdio@18003000: #size-cells:0:0: 0 was expected .../linux/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dt.yaml: mdio@18003000: #address-cells:0:0: 1 was expected .../linux/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dt.yaml: mdio@18003000: #size-cells:0:0: 0 was expected .../linux/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dt.yaml: mdio@18003000: #address-cells:0:0: 1 was expected .../linux/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dt.yaml: mdio@18003000: #size-cells:0:0: 0 was expected .../linux/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dt.yaml: mdio@18003000: #address-cells:0:0: 1 was expected .../linux/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dt.yaml: mdio@18003000: #size-cells:0:0: 0 was expected .../linux/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dt.yaml: mdio@18003000: #address-cells:0:0: 1 was expected .../linux/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dt.yaml: mdio@18003000: #size-cells:0:0: 0 was expected .../linux/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dt.yaml: mdio@18003000: #address-cells:0:0: 1 was expected .../linux/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dt.yaml: mdio@18003000: #size-cells:0:0: 0 was expected .../linux/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dt.yaml: mdio@18003000: #address-cells:0:0: 1 was expected .../linux/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dt.yaml: mdio@18003000: #size-cells:0:0: 0 was expected .../linux/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dt.yaml: mdio@18003000: #address-cells:0:0: 1 was expected .../linux/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dt.yaml: mdio@18003000: #size-cells:0:0: 0 was expected .../linux/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dt.yaml: mdio@18003000: #address-cells:0:0: 1 was expected .../linux/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dt.yaml: mdio@18003000: #size-cells:0:0: 0 was expected .../linux/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dt.yaml: mdio@18003000: #address-cells:0:0: 1 was expected .../linux/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dt.yaml: mdio@18003000: #size-cells:0:0: 0 was expected .../linux/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dt.yaml: mdio@18003000: #address-cells:0:0: 1 was expected .../linux/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dt.yaml: mdio@18003000: #size-cells:0:0: 0 was expected .../linux/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dt.yaml: mdio@18003000: #address-cells:0:0: 1 was expected .../linux/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dt.yaml: mdio@18003000: #size-cells:0:0: 0 was expected .../linux/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dt.yaml: mdio@18003000: #address-cells:0:0: 1 was expected .../linux/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dt.yaml: mdio@18003000: #size-cells:0:0: 0 was expected .../linux/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dt.yaml: mdio@18003000: #address-cells:0:0: 1 was expected .../linux/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dt.yaml: mdio@18003000: #size-cells:0:0: 0 was expected .../linux/arch/arm/boot/dts/bcm4709-netgear-r7000.dt.yaml: mdio@18003000: #address-cells:0:0: 1 was expected .../linux/arch/arm/boot/dts/bcm4709-netgear-r7000.dt.yaml: mdio@18003000: #size-cells:0:0: 0 was expected .../linux/arch/arm/boot/dts/bcm4709-linksys-ea9200.dt.yaml: mdio@18003000: #address-cells:0:0: 1 was expected .../linux/arch/arm/boot/dts/bcm4709-linksys-ea9200.dt.yaml: mdio@18003000: #size-cells:0:0: 0 was expected .../linux/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dt.yaml: mdio@18003000: #address-cells:0:0: 1 was expected .../linux/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dt.yaml: mdio@18003000: #size-cells:0:0: 0 was expected .../linux/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dt.yaml: mdio@18003000: #address-cells:0:0: 1 was expected .../linux/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dt.yaml: mdio@18003000: #size-cells:0:0: 0 was expected .../linux/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dt.yaml: mdio@18003000: #address-cells:0:0: 1 was expected .../linux/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dt.yaml: mdio@18003000: #size-cells:0:0: 0 was expected .../linux/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dt.yaml: mdio@18003000: #address-cells:0:0: 1 was expected .../linux/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dt.yaml: mdio@18003000: #size-cells:0:0: 0 was expected .../linux/arch/arm/boot/dts/bcm4709-netgear-r8000.dt.yaml: mdio@18003000: #address-cells:0:0: 1 was expected .../linux/arch/arm/boot/dts/bcm4709-netgear-r8000.dt.yaml: mdio@18003000: #size-cells:0:0: 0 was expected .../linux/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dt.yaml: mdio@18003000: #address-cells:0:0: 1 was expected .../linux/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dt.yaml: mdio@18003000: #size-cells:0:0: 0 was expected .../linux/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dt.yaml: mdio@18003000: #address-cells:0:0: 1 was expected .../linux/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dt.yaml: mdio@18003000: #size-cells:0:0: 0 was expected .../linux/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dt.yaml: mdio@18003000: #address-cells:0:0: 1 was expected .../linux/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dt.yaml: mdio@18003000: #size-cells:0:0: 0 was expected .../linux/arch/arm/boot/dts/bcm47094-linksys-panamera.dt.yaml: mdio@18003000: #address-cells:0:0: 1 was expected .../linux/arch/arm/boot/dts/bcm47094-linksys-panamera.dt.yaml: mdio@18003000: #size-cells:0:0: 0 was expected .../linux/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dt.yaml: mdio@18003000: #address-cells:0:0: 1 was expected .../linux/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dt.yaml: mdio@18003000: #size-cells:0:0: 0 was expected .../linux/arch/arm/boot/dts/bcm94709.dt.yaml: mdio@18003000: #address-cells:0:0: 1 was expected .../linux/arch/arm/boot/dts/bcm94709.dt.yaml: mdio@18003000: #size-cells:0:0: 0 was expected .../linux/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dt.yaml: mdio@18003000: #address-cells:0:0: 1 was expected .../linux/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dt.yaml: mdio@18003000: #size-cells:0:0: 0 was expected .../linux/arch/arm/boot/dts/bcm47094-phicomm-k3.dt.yaml: mdio@18003000: #address-cells:0:0: 1 was expected .../linux/arch/arm/boot/dts/bcm47094-phicomm-k3.dt.yaml: mdio@18003000: #size-cells:0:0: 0 was expected .../linux/arch/arm/boot/dts/bcm911360k.dt.yaml: mdio@18002000: #address-cells:0:0: 1 was expected .../linux/arch/arm/boot/dts/bcm911360k.dt.yaml: mdio@18002000: #size-cells:0:0: 0 was expected .../linux/arch/arm/boot/dts/bcm47094-netgear-r8500.dt.yaml: mdio@18003000: #address-cells:0:0: 1 was expected .../linux/arch/arm/boot/dts/bcm47094-netgear-r8500.dt.yaml: mdio@18003000: #size-cells:0:0: 0 was expected .../linux/arch/arm/boot/dts/bcm94708.dt.yaml: mdio@18003000: #address-cells:0:0: 1 was expected .../linux/arch/arm/boot/dts/bcm94708.dt.yaml: mdio@18003000: #size-cells:0:0: 0 was expected .../linux/arch/arm/boot/dts/bcm953012k.dt.yaml: mdio@18003000: #address-cells:0:0: 1 was expected .../linux/arch/arm/boot/dts/bcm953012k.dt.yaml: mdio@18003000: #size-cells:0:0: 0 was expected .../linux/arch/arm/boot/dts/bcm953012er.dt.yaml: mdio@18003000: #address-cells:0:0: 1 was expected .../linux/arch/arm/boot/dts/bcm953012er.dt.yaml: mdio@18003000: #size-cells:0:0: 0 was expected .../linux/arch/arm/boot/dts/bcm911360_entphn.dt.yaml: mdio@18002000: #address-cells:0:0: 1 was expected .../linux/arch/arm/boot/dts/bcm911360_entphn.dt.yaml: mdio@18002000: #size-cells:0:0: 0 was expected .../linux/arch/arm/boot/dts/bcm953012hr.dt.yaml: mdio@18003000: #address-cells:0:0: 1 was expected .../linux/arch/arm/boot/dts/bcm953012hr.dt.yaml: mdio@18003000: #size-cells:0:0: 0 was expected .../linux/arch/arm/boot/dts/bcm958305k.dt.yaml: mdio@18002000: #address-cells:0:0: 1 was expected .../linux/arch/arm/boot/dts/bcm958305k.dt.yaml: mdio@18002000: #size-cells:0:0: 0 was expected .../linux/arch/arm/boot/dts/bcm958300k.dt.yaml: mdio@18002000: #address-cells:0:0: 1 was expected .../linux/arch/arm/boot/dts/bcm958300k.dt.yaml: mdio@18002000: #size-cells:0:0: 0 was expected
On 12/5/19 6:48 AM, Simon Horman wrote: > On Wed, Nov 27, 2019 at 05:39:28PM +0200, Grygorii Strashko wrote: >> Use non vendor specific compatible string in example, otherwise DT YAML >> schemas validation may trigger warnings specific to TI ti,davinci_mdio >> and not to the generic MDIO example. >> >> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> > > This seems sensible to me. > > Reviewed-by: Simon Horman <simon.horman@netronome.com> > > Are there any plans to address the errors DT YAML schema validation reports? Sure, let me try to tackle this weekend. > > $ ARCH=arm make dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/net/mdio.yaml > .../linux/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dt.yaml: mdio@18003000: #address-cells:0:0: 1 was expected > .../linux/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dt.yaml: mdio@18003000: #size-cells:0:0: 0 was expected > .../linux/arch/arm/boot/dts/bcm4708-netgear-r6250.dt.yaml: mdio@18003000: #address-cells:0:0: 1 was expected > .../linux/arch/arm/boot/dts/bcm4708-netgear-r6250.dt.yaml: mdio@18003000: #size-cells:0:0: 0 was expected > .../linux/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dt.yaml: mdio@18003000: #address-cells:0:0: 1 was expected > .../linux/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dt.yaml: mdio@18003000: #size-cells:0:0: 0 was expected > .../linux/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dt.yaml: mdio@18003000: #address-cells:0:0: 1 was expected > .../linux/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dt.yaml: mdio@18003000: #size-cells:0:0: 0 was expected > .../linux/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dt.yaml: mdio@18003000: #address-cells:0:0: 1 was expected > .../linux/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dt.yaml: mdio@18003000: #size-cells:0:0: 0 was expected > .../linux/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dt.yaml: mdio@18003000: #address-cells:0:0: 1 was expected > .../linux/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dt.yaml: mdio@18003000: #size-cells:0:0: 0 was expected > .../linux/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dt.yaml: mdio@18003000: #address-cells:0:0: 1 was expected > .../linux/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dt.yaml: mdio@18003000: #size-cells:0:0: 0 was expected > .../linux/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dt.yaml: mdio@18003000: #address-cells:0:0: 1 was expected > .../linux/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dt.yaml: mdio@18003000: #size-cells:0:0: 0 was expected > .../linux/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dt.yaml: mdio@18003000: #address-cells:0:0: 1 was expected > .../linux/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dt.yaml: mdio@18003000: #size-cells:0:0: 0 was expected > .../linux/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dt.yaml: mdio@18003000: #address-cells:0:0: 1 was expected > .../linux/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dt.yaml: mdio@18003000: #size-cells:0:0: 0 was expected > .../linux/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dt.yaml: mdio@18003000: #address-cells:0:0: 1 was expected > .../linux/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dt.yaml: mdio@18003000: #size-cells:0:0: 0 was expected > .../linux/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dt.yaml: mdio@18003000: #address-cells:0:0: 1 was expected > .../linux/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dt.yaml: mdio@18003000: #size-cells:0:0: 0 was expected > .../linux/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dt.yaml: mdio@18003000: #address-cells:0:0: 1 was expected > .../linux/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dt.yaml: mdio@18003000: #size-cells:0:0: 0 was expected > .../linux/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dt.yaml: mdio@18003000: #address-cells:0:0: 1 was expected > .../linux/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dt.yaml: mdio@18003000: #size-cells:0:0: 0 was expected > .../linux/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dt.yaml: mdio@18003000: #address-cells:0:0: 1 was expected > .../linux/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dt.yaml: mdio@18003000: #size-cells:0:0: 0 was expected > .../linux/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dt.yaml: mdio@18003000: #address-cells:0:0: 1 was expected > .../linux/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dt.yaml: mdio@18003000: #size-cells:0:0: 0 was expected > .../linux/arch/arm/boot/dts/bcm4709-netgear-r7000.dt.yaml: mdio@18003000: #address-cells:0:0: 1 was expected > .../linux/arch/arm/boot/dts/bcm4709-netgear-r7000.dt.yaml: mdio@18003000: #size-cells:0:0: 0 was expected > .../linux/arch/arm/boot/dts/bcm4709-linksys-ea9200.dt.yaml: mdio@18003000: #address-cells:0:0: 1 was expected > .../linux/arch/arm/boot/dts/bcm4709-linksys-ea9200.dt.yaml: mdio@18003000: #size-cells:0:0: 0 was expected > .../linux/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dt.yaml: mdio@18003000: #address-cells:0:0: 1 was expected > .../linux/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dt.yaml: mdio@18003000: #size-cells:0:0: 0 was expected > .../linux/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dt.yaml: mdio@18003000: #address-cells:0:0: 1 was expected > .../linux/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dt.yaml: mdio@18003000: #size-cells:0:0: 0 was expected > .../linux/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dt.yaml: mdio@18003000: #address-cells:0:0: 1 was expected > .../linux/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dt.yaml: mdio@18003000: #size-cells:0:0: 0 was expected > .../linux/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dt.yaml: mdio@18003000: #address-cells:0:0: 1 was expected > .../linux/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dt.yaml: mdio@18003000: #size-cells:0:0: 0 was expected > .../linux/arch/arm/boot/dts/bcm4709-netgear-r8000.dt.yaml: mdio@18003000: #address-cells:0:0: 1 was expected > .../linux/arch/arm/boot/dts/bcm4709-netgear-r8000.dt.yaml: mdio@18003000: #size-cells:0:0: 0 was expected > .../linux/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dt.yaml: mdio@18003000: #address-cells:0:0: 1 was expected > .../linux/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dt.yaml: mdio@18003000: #size-cells:0:0: 0 was expected > .../linux/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dt.yaml: mdio@18003000: #address-cells:0:0: 1 was expected > .../linux/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dt.yaml: mdio@18003000: #size-cells:0:0: 0 was expected > .../linux/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dt.yaml: mdio@18003000: #address-cells:0:0: 1 was expected > .../linux/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dt.yaml: mdio@18003000: #size-cells:0:0: 0 was expected > .../linux/arch/arm/boot/dts/bcm47094-linksys-panamera.dt.yaml: mdio@18003000: #address-cells:0:0: 1 was expected > .../linux/arch/arm/boot/dts/bcm47094-linksys-panamera.dt.yaml: mdio@18003000: #size-cells:0:0: 0 was expected > .../linux/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dt.yaml: mdio@18003000: #address-cells:0:0: 1 was expected > .../linux/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dt.yaml: mdio@18003000: #size-cells:0:0: 0 was expected > .../linux/arch/arm/boot/dts/bcm94709.dt.yaml: mdio@18003000: #address-cells:0:0: 1 was expected > .../linux/arch/arm/boot/dts/bcm94709.dt.yaml: mdio@18003000: #size-cells:0:0: 0 was expected > .../linux/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dt.yaml: mdio@18003000: #address-cells:0:0: 1 was expected > .../linux/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dt.yaml: mdio@18003000: #size-cells:0:0: 0 was expected > .../linux/arch/arm/boot/dts/bcm47094-phicomm-k3.dt.yaml: mdio@18003000: #address-cells:0:0: 1 was expected > .../linux/arch/arm/boot/dts/bcm47094-phicomm-k3.dt.yaml: mdio@18003000: #size-cells:0:0: 0 was expected > .../linux/arch/arm/boot/dts/bcm911360k.dt.yaml: mdio@18002000: #address-cells:0:0: 1 was expected > .../linux/arch/arm/boot/dts/bcm911360k.dt.yaml: mdio@18002000: #size-cells:0:0: 0 was expected > .../linux/arch/arm/boot/dts/bcm47094-netgear-r8500.dt.yaml: mdio@18003000: #address-cells:0:0: 1 was expected > .../linux/arch/arm/boot/dts/bcm47094-netgear-r8500.dt.yaml: mdio@18003000: #size-cells:0:0: 0 was expected > .../linux/arch/arm/boot/dts/bcm94708.dt.yaml: mdio@18003000: #address-cells:0:0: 1 was expected > .../linux/arch/arm/boot/dts/bcm94708.dt.yaml: mdio@18003000: #size-cells:0:0: 0 was expected > .../linux/arch/arm/boot/dts/bcm953012k.dt.yaml: mdio@18003000: #address-cells:0:0: 1 was expected > .../linux/arch/arm/boot/dts/bcm953012k.dt.yaml: mdio@18003000: #size-cells:0:0: 0 was expected > .../linux/arch/arm/boot/dts/bcm953012er.dt.yaml: mdio@18003000: #address-cells:0:0: 1 was expected > .../linux/arch/arm/boot/dts/bcm953012er.dt.yaml: mdio@18003000: #size-cells:0:0: 0 was expected > .../linux/arch/arm/boot/dts/bcm911360_entphn.dt.yaml: mdio@18002000: #address-cells:0:0: 1 was expected > .../linux/arch/arm/boot/dts/bcm911360_entphn.dt.yaml: mdio@18002000: #size-cells:0:0: 0 was expected > .../linux/arch/arm/boot/dts/bcm953012hr.dt.yaml: mdio@18003000: #address-cells:0:0: 1 was expected > .../linux/arch/arm/boot/dts/bcm953012hr.dt.yaml: mdio@18003000: #size-cells:0:0: 0 was expected > .../linux/arch/arm/boot/dts/bcm958305k.dt.yaml: mdio@18002000: #address-cells:0:0: 1 was expected > .../linux/arch/arm/boot/dts/bcm958305k.dt.yaml: mdio@18002000: #size-cells:0:0: 0 was expected > .../linux/arch/arm/boot/dts/bcm958300k.dt.yaml: mdio@18002000: #address-cells:0:0: 1 was expected > .../linux/arch/arm/boot/dts/bcm958300k.dt.yaml: mdio@18002000: #size-cells:0:0: 0 was expected >
On Wed, Nov 27, 2019 at 9:39 AM Grygorii Strashko <grygorii.strashko@ti.com> wrote: > > Use non vendor specific compatible string in example, otherwise DT YAML > schemas validation may trigger warnings specific to TI ti,davinci_mdio > and not to the generic MDIO example. > > Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> > --- > Documentation/devicetree/bindings/net/mdio.yaml | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/Documentation/devicetree/bindings/net/mdio.yaml b/Documentation/devicetree/bindings/net/mdio.yaml > index 5d08d2ffd4eb..524f062c6973 100644 > --- a/Documentation/devicetree/bindings/net/mdio.yaml > +++ b/Documentation/devicetree/bindings/net/mdio.yaml > @@ -56,7 +56,7 @@ patternProperties: > examples: > - | > davinci_mdio: mdio@5c030000 { > - compatible = "ti,davinci_mdio"; > + compatible = "vendor,mdio"; The problem with this is eventually 'vendor,mdio' will get flagged as an undocumented compatible. We're a ways off from being able to enable that until we have a majority of bindings converted. Though maybe examples can be enabled sooner rather than later. > reg = <0x5c030000 0x1000>; > #address-cells = <1>; > #size-cells = <0>; > -- > 2.17.1 >
On 05/12/2019 19:59, Rob Herring wrote: > On Wed, Nov 27, 2019 at 9:39 AM Grygorii Strashko > <grygorii.strashko@ti.com> wrote: >> >> Use non vendor specific compatible string in example, otherwise DT YAML >> schemas validation may trigger warnings specific to TI ti,davinci_mdio >> and not to the generic MDIO example. >> >> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> >> --- >> Documentation/devicetree/bindings/net/mdio.yaml | 2 +- >> 1 file changed, 1 insertion(+), 1 deletion(-) >> >> diff --git a/Documentation/devicetree/bindings/net/mdio.yaml b/Documentation/devicetree/bindings/net/mdio.yaml >> index 5d08d2ffd4eb..524f062c6973 100644 >> --- a/Documentation/devicetree/bindings/net/mdio.yaml >> +++ b/Documentation/devicetree/bindings/net/mdio.yaml >> @@ -56,7 +56,7 @@ patternProperties: >> examples: >> - | >> davinci_mdio: mdio@5c030000 { >> - compatible = "ti,davinci_mdio"; >> + compatible = "vendor,mdio"; > > The problem with this is eventually 'vendor,mdio' will get flagged as > an undocumented compatible. We're a ways off from being able to enable > that until we have a majority of bindings converted. Though maybe > examples can be enabled sooner rather than later. > May be some generic compatible string be used for all examples, like: "vendor,example-ip". What do you think?
On Fri, Dec 6, 2019 at 5:14 AM Grygorii Strashko <grygorii.strashko@ti.com> wrote: > > > > On 05/12/2019 19:59, Rob Herring wrote: > > On Wed, Nov 27, 2019 at 9:39 AM Grygorii Strashko > > <grygorii.strashko@ti.com> wrote: > >> > >> Use non vendor specific compatible string in example, otherwise DT YAML > >> schemas validation may trigger warnings specific to TI ti,davinci_mdio > >> and not to the generic MDIO example. > >> > >> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> > >> --- > >> Documentation/devicetree/bindings/net/mdio.yaml | 2 +- > >> 1 file changed, 1 insertion(+), 1 deletion(-) > >> > >> diff --git a/Documentation/devicetree/bindings/net/mdio.yaml b/Documentation/devicetree/bindings/net/mdio.yaml > >> index 5d08d2ffd4eb..524f062c6973 100644 > >> --- a/Documentation/devicetree/bindings/net/mdio.yaml > >> +++ b/Documentation/devicetree/bindings/net/mdio.yaml > >> @@ -56,7 +56,7 @@ patternProperties: > >> examples: > >> - | > >> davinci_mdio: mdio@5c030000 { > >> - compatible = "ti,davinci_mdio"; > >> + compatible = "vendor,mdio"; > > > > The problem with this is eventually 'vendor,mdio' will get flagged as > > an undocumented compatible. We're a ways off from being able to enable > > that until we have a majority of bindings converted. Though maybe > > examples can be enabled sooner rather than later. > > > > May be some generic compatible string be used for all examples, > like: "vendor,example-ip". What do you think? I'm still not clear what problem you are trying to solve. 'may trigger warnings' doesn't sound like an actual problem. Either make the example complete enough to pass validation or just remove it because common bindings aren't a complete binding on their own. I'm sure there will be plenty of other MDIO binding examples. Rob
On 06/12/2019 17:09, Rob Herring wrote: > On Fri, Dec 6, 2019 at 5:14 AM Grygorii Strashko > <grygorii.strashko@ti.com> wrote: >> >> >> >> On 05/12/2019 19:59, Rob Herring wrote: >>> On Wed, Nov 27, 2019 at 9:39 AM Grygorii Strashko >>> <grygorii.strashko@ti.com> wrote: >>>> >>>> Use non vendor specific compatible string in example, otherwise DT YAML >>>> schemas validation may trigger warnings specific to TI ti,davinci_mdio >>>> and not to the generic MDIO example. >>>> >>>> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> >>>> --- >>>> Documentation/devicetree/bindings/net/mdio.yaml | 2 +- >>>> 1 file changed, 1 insertion(+), 1 deletion(-) >>>> >>>> diff --git a/Documentation/devicetree/bindings/net/mdio.yaml b/Documentation/devicetree/bindings/net/mdio.yaml >>>> index 5d08d2ffd4eb..524f062c6973 100644 >>>> --- a/Documentation/devicetree/bindings/net/mdio.yaml >>>> +++ b/Documentation/devicetree/bindings/net/mdio.yaml >>>> @@ -56,7 +56,7 @@ patternProperties: >>>> examples: >>>> - | >>>> davinci_mdio: mdio@5c030000 { >>>> - compatible = "ti,davinci_mdio"; >>>> + compatible = "vendor,mdio"; >>> >>> The problem with this is eventually 'vendor,mdio' will get flagged as >>> an undocumented compatible. We're a ways off from being able to enable >>> that until we have a majority of bindings converted. Though maybe >>> examples can be enabled sooner rather than later. >>> >> >> May be some generic compatible string be used for all examples, >> like: "vendor,example-ip". What do you think? > > I'm still not clear what problem you are trying to solve. 'may trigger > warnings' doesn't sound like an actual problem. oh. sry. it's like this - mdio.yaml describes generic MDIO properties, but uses compatible = "ti,davinci_mdio"; - davinci_mdio (or other IPs) has some custom properties. Some of them can be marked as required - for example bus_freq. And in the feature i need to add clocks. Now "bus_freq" is required for davinci_mdio, but not required for generic mdio example. As result, by default, following warning will be produced: /home/grygorii/kernel.org/linux-master/linux/Documentation/devicetree/bindings/net/mdio.example.dt.yaml: mdio@5c030000: 'bus_freq' is a required property to w/a above I've added for davinci_mdio: if: properties: compatible: contains: const: ti,davinci_mdio required: - bus_freq (by the way above is incorrect and if i add "then:" it will still produce warning :), but it is different story) Next if I add "clocks" as required for davinci_mdio I'll get warning again and will need to hack ti,davinci-mdio.yaml or update example in mdio.yaml. So, I'm the position of lucky persons who is working on some HW module which bindings where occasionally selected as generic example. :) FYI, below is example from power-domain.yaml: parent3: power-controller@12340000 { compatible = "foo,power-controller"; reg = <0x12340000 0x1000>; #power-domain-cells = <0>; domain-idle-states = <&DOMAIN_RET>, <&DOMAIN_PWR_DN>; };
Hi Rob, On 06/12/2019 17:44, Grygorii Strashko wrote: > > > On 06/12/2019 17:09, Rob Herring wrote: >> On Fri, Dec 6, 2019 at 5:14 AM Grygorii Strashko >> <grygorii.strashko@ti.com> wrote: >>> >>> >>> >>> On 05/12/2019 19:59, Rob Herring wrote: >>>> On Wed, Nov 27, 2019 at 9:39 AM Grygorii Strashko >>>> <grygorii.strashko@ti.com> wrote: >>>>> >>>>> Use non vendor specific compatible string in example, otherwise DT YAML >>>>> schemas validation may trigger warnings specific to TI ti,davinci_mdio >>>>> and not to the generic MDIO example. >>>>> >>>>> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> >>>>> --- >>>>> Documentation/devicetree/bindings/net/mdio.yaml | 2 +- >>>>> 1 file changed, 1 insertion(+), 1 deletion(-) >>>>> >>>>> diff --git a/Documentation/devicetree/bindings/net/mdio.yaml b/Documentation/devicetree/bindings/net/mdio.yaml >>>>> index 5d08d2ffd4eb..524f062c6973 100644 >>>>> --- a/Documentation/devicetree/bindings/net/mdio.yaml >>>>> +++ b/Documentation/devicetree/bindings/net/mdio.yaml >>>>> @@ -56,7 +56,7 @@ patternProperties: >>>>> examples: >>>>> - | >>>>> davinci_mdio: mdio@5c030000 { >>>>> - compatible = "ti,davinci_mdio"; >>>>> + compatible = "vendor,mdio"; >>>> >>>> The problem with this is eventually 'vendor,mdio' will get flagged as >>>> an undocumented compatible. We're a ways off from being able to enable >>>> that until we have a majority of bindings converted. Though maybe >>>> examples can be enabled sooner rather than later. >>>> >>> >>> May be some generic compatible string be used for all examples, >>> like: "vendor,example-ip". What do you think? >> >> I'm still not clear what problem you are trying to solve. 'may trigger >> warnings' doesn't sound like an actual problem. > > oh. sry. > it's like this > - mdio.yaml describes generic MDIO properties, but uses compatible = "ti,davinci_mdio"; > - davinci_mdio (or other IPs) has some custom properties. > Some of them can be marked as required - for example bus_freq. > And in the feature i need to add clocks. > > Now "bus_freq" is required for davinci_mdio, but not required for generic mdio example. > As result, by default, following warning will be produced: > /home/grygorii/kernel.org/linux-master/linux/Documentation/devicetree/bindings/net/mdio.example.dt.yaml: mdio@5c030000: 'bus_freq' is a required property > > to w/a above I've added for davinci_mdio: > if: > properties: > compatible: > contains: > const: ti,davinci_mdio > required: > - bus_freq > (by the way above is incorrect and if i add "then:" it will still produce warning :), but > it is different story) > > Next if I add "clocks" as required for davinci_mdio I'll get warning again and > will need to hack ti,davinci-mdio.yaml or update example in mdio.yaml. > > So, I'm the position of lucky persons who is working on some HW module which bindings > where occasionally selected as generic example. :) > > FYI, below is example from power-domain.yaml: > > parent3: power-controller@12340000 { > compatible = "foo,power-controller"; > reg = <0x12340000 0x1000>; > #power-domain-cells = <0>; > domain-idle-states = <&DOMAIN_RET>, <&DOMAIN_PWR_DN>; > }; > May be it would be acceptable to just drop "compatible" property from generic MDIO example?
diff --git a/Documentation/devicetree/bindings/net/mdio.yaml b/Documentation/devicetree/bindings/net/mdio.yaml index 5d08d2ffd4eb..524f062c6973 100644 --- a/Documentation/devicetree/bindings/net/mdio.yaml +++ b/Documentation/devicetree/bindings/net/mdio.yaml @@ -56,7 +56,7 @@ patternProperties: examples: - | davinci_mdio: mdio@5c030000 { - compatible = "ti,davinci_mdio"; + compatible = "vendor,mdio"; reg = <0x5c030000 0x1000>; #address-cells = <1>; #size-cells = <0>;
Use non vendor specific compatible string in example, otherwise DT YAML schemas validation may trigger warnings specific to TI ti,davinci_mdio and not to the generic MDIO example. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> --- Documentation/devicetree/bindings/net/mdio.yaml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)