@@ -29,6 +29,11 @@ SDM845 platform.
Definition: must be 2. Specifying the pin number and flags, as defined
in <dt-bindings/interrupt-controller/irq.h>
+- wakeup-parent:
+ Usage: optional
+ Value type: <phandle>
+ Definition: A phandle to the wakeup interrupt controller for the SoC.
+
- gpio-controller:
Usage: required
Value type: <none>
@@ -53,7 +58,6 @@ pin, a group, or a list of pins or groups. This configuration can include the
mux function to select on those pin(s)/group(s), and various pin configuration
parameters, such as pull-up, drive strength, etc.
-
PIN CONFIGURATION NODES:
The name of each subnode is not important; all subnodes should be enumerated
@@ -160,6 +164,7 @@ Example:
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
+ wake-parent = <&pdc_intc>;
qup9_active: qup9-active {
mux {
SDM845 SoC has an always-on interrupt controller (PDC) with select GPIO routed to the PDC as interrupts that can be used to wake the system up from deep low power modes and suspend. Cc: devicetree@vger.kernel.org Signed-off-by: Lina Iyer <ilina@codeaurora.org> --- .../devicetree/bindings/pinctrl/qcom,sdm845-pinctrl.txt | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)