| Message ID | 20190124032730.18237-3-jiaxun.yang@flygoat.com |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
| Series | None | expand |
| Context | Check | Description |
|---|---|---|
| robh/checkpatch | success |
On Thu, Jan 24, 2019 at 11:27:30AM +0800, Jiaxun Yang wrote: > Dt-bindings doc about Loongson-1 interrupt controller > > Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> > --- > .../loongson,ls1x-intc.txt | 24 +++++++++++++++++++ > 1 file changed, 24 insertions(+) > create mode 100644 Documentation/devicetree/bindings/interrupt-controller/loongson,ls1x-intc.txt > > diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,ls1x-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/loongson,ls1x-intc.txt > new file mode 100644 > index 000000000000..a4e17c3f5f93 > --- /dev/null > +++ b/Documentation/devicetree/bindings/interrupt-controller/loongson,ls1x-intc.txt > @@ -0,0 +1,24 @@ > +Loongson ls1x Interrupt Controller > + > +Required properties: > + > +- compatible : should be "loongson,ls1x-intc". Valid strings are: > + > +- reg : Specifies base physical address and size of the registers. > +- interrupt-controller : Identifies the node as an interrupt controller > +- #interrupt-cells : Specifies the number of cells needed to encode an > + interrupt source. The value shall be 1. > +- interrupts : Specifies the CPU interrupts the controller is connected to. > + > +Example: > + > +intc: interrupt-controller@1fd01040 { > + compatible = "loongson,ls1x-intc"; > + reg = <0x1fd01040 0x78>; > + > + interrupt-controller; > + #interrupt-cells = <1>; > + > + interrupt-parent = <&cpu_intc>; > + interrupts = <2>, <3>, <4>, <5>, <6>; > +}; > \ No newline at end of file Please fix. Otherwise, Reviewed-by: Rob Herring <robh@kernel.org>
diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,ls1x-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/loongson,ls1x-intc.txt new file mode 100644 index 000000000000..a4e17c3f5f93 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/loongson,ls1x-intc.txt @@ -0,0 +1,24 @@ +Loongson ls1x Interrupt Controller + +Required properties: + +- compatible : should be "loongson,ls1x-intc". Valid strings are: + +- reg : Specifies base physical address and size of the registers. +- interrupt-controller : Identifies the node as an interrupt controller +- #interrupt-cells : Specifies the number of cells needed to encode an + interrupt source. The value shall be 1. +- interrupts : Specifies the CPU interrupts the controller is connected to. + +Example: + +intc: interrupt-controller@1fd01040 { + compatible = "loongson,ls1x-intc"; + reg = <0x1fd01040 0x78>; + + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-parent = <&cpu_intc>; + interrupts = <2>, <3>, <4>, <5>, <6>; +}; \ No newline at end of file
Dt-bindings doc about Loongson-1 interrupt controller Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> --- .../loongson,ls1x-intc.txt | 24 +++++++++++++++++++ 1 file changed, 24 insertions(+) create mode 100644 Documentation/devicetree/bindings/interrupt-controller/loongson,ls1x-intc.txt