@@ -25,10 +25,6 @@ Required properties:
- For all others:
- The reg-names property shouldn't be defined.
- - #clock-cells: must be 1 (PCIe and USB3 PHYs only)
- - Phy pll outputs a bunch of clocks for Tx, Rx and Pipe
- interface (for pipe based PHYs). These clock are then gate-controlled
- by gcc.
- #address-cells: must be 1
- #size-cells: must be 1
- ranges: must be present
@@ -94,6 +90,9 @@ Required properties for child node of PCIe and USB3 qmp phys:
- "pcie20_phy0_pipe_clk" Pipe Clock parent
(or)
"pcie20_phy1_pipe_clk"
+ - #clock-cells: must be 0
+ - Phy pll outputs pipe clocks for pipe based PHYs. These clocks are then
+ gate-controlled by the gcc.
- resets: a list of phandles and reset controller specifier pairs,
one for each entry in reset-names.
@@ -104,7 +103,6 @@ Example:
phy@34000 {
compatible = "qcom,msm8996-qmp-pcie-phy";
reg = <0x34000 0x488>;
- #clock-cells = <1>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
@@ -126,6 +124,7 @@ Example:
reg = <0x35000 0x130>,
<0x35200 0x200>,
<0x35400 0x1dc>;
+ #clock-cells = <0>;
#phy-cells = <0>;
clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
@@ -143,7 +142,6 @@ Example:
phy@88eb000 {
compatible = "qcom,sdm845-qmp-usb3-uni-phy";
reg = <0x88eb000 0x18c>;
- #clock-cells = <1>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
@@ -163,6 +161,7 @@ Example:
<0x88eb400 0x1fc>,
<0x88eb800 0x218>,
<0x88eb600 0x70>;
+ #clock-cells = <0>;
#phy-cells = <0>;
clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
clock-names = "pipe0";