| Message ID | 20180727195358.23336-3-alexandre.belloni@bootlin.com |
|---|---|
| State | Changes Requested, archived |
| Headers | show |
| Series | Add support for MSCC Ocelot SPI | expand |
On Fri, Jul 27, 2018 at 09:53:55PM +0200, Alexandre Belloni wrote: > +- compatible : "snps,dw-apb-ssi" or "mscc,<soc>-spi" > +- reg : The register base for the controller. For "mscc,<soc>-spi", a second > + register set is required (named ICPU_CFG:SPI_MST) What are valid values for "<soc>"? Please submit patches using subject lines reflecting the style for the subsystem. This makes it easier for people to identify relevant patches. Look at what existing commits in the area you're changing are doing and make sure your subject lines visually resemble what they're doing.
diff --git a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt index 204b311e0400..d97b9fc4c1cb 100644 --- a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt +++ b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt @@ -1,8 +1,9 @@ Synopsys DesignWare AMBA 2.0 Synchronous Serial Interface. Required properties: -- compatible : "snps,dw-apb-ssi" -- reg : The register base for the controller. +- compatible : "snps,dw-apb-ssi" or "mscc,<soc>-spi" +- reg : The register base for the controller. For "mscc,<soc>-spi", a second + register set is required (named ICPU_CFG:SPI_MST) - interrupts : One interrupt, used by the controller. - #address-cells : <1>, as required by generic SPI binding. - #size-cells : <0>, also as required by generic SPI binding.
The integration of the Designware SPI controller on Microsemi SoCs requires an extra register set to be able to give the IP control of the SPI interface. Cc: Rob Herring <robh+dt@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> --- Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)