diff mbox series

[v10,24/27] dt-bindings: timer: new bindings for TI DaVinci timer

Message ID 20180509172606.29387-25-david@lechnology.com
State Not Applicable, archived
Headers show
Series ARM: davinci: convert to common clock framework​ | expand

Commit Message

David Lechner May 9, 2018, 5:26 p.m. UTC 
This adds new device tree bindings for the timer IP block of TI
DaVinci-like SoCs.

Signed-off-by: David Lechner <david@lechnology.com>
---

v10 changes:
- changed compatible to "ti,da830-timer"
- added interrupts and interrupt-names properties
- fixed grammatical error

v9 changes:
- new patch in v9


 .../bindings/timer/ti,davinci-timer.txt       | 37 +++++++++++++++++++
 1 file changed, 37 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/timer/ti,davinci-timer.txt

Comments

Rob Herring May 18, 2018, 2:24 p.m. UTC | #1 
On Wed, May 09, 2018 at 12:26:03PM -0500, David Lechner wrote:
> This adds new device tree bindings for the timer IP block of TI
> DaVinci-like SoCs.
> 
> Signed-off-by: David Lechner <david@lechnology.com>
> ---
> 
> v10 changes:
> - changed compatible to "ti,da830-timer"
> - added interrupts and interrupt-names properties
> - fixed grammatical error
> 
> v9 changes:
> - new patch in v9
> 
> 
>  .../bindings/timer/ti,davinci-timer.txt       | 37 +++++++++++++++++++
>  1 file changed, 37 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/timer/ti,davinci-timer.txt

Reviewed-by: Rob Herring <robh@kernel.org>

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/timer/ti,davinci-timer.txt b/Documentation/devicetree/bindings/timer/ti,davinci-timer.txt
new file mode 100644
index 000000000000..31c72da92827
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/ti,davinci-timer.txt
@@ -0,0 +1,37 @@ 
+* Device tree bindings for Texas Instruments DaVinci timer
+
+This document provides bindings for the 64-bit timer in the DaVinci
+architecture devices. The timer can be configured as a general-purpose 64-bit
+timer, dual general-purpose 32-bit timers. When configured as dual 32-bit
+timers, each half can operate in conjunction (chain mode) or independently
+(unchained mode) of each other.
+
+The timer is a free running up-counter and can generate interrupts when the
+counter reaches preset counter values. 
+
+Also see ../watchdog/davinci-wdt.txt for timers that are configurable as
+watchdog timers.
+
+Required properties:
+
+- compatible : should be "ti,da830-timer".
+- reg : specifies base physical address and count of the registers.
+- interrupts : interrupts generated by the timer.
+- interrupt-names: should be "tint12", "tint34", "cmpint0", "cmpint1",
+		   "cmpint2", "cmpint3", "cmpint4", "cmpint5", "cmpint6",
+		   "cmpint7" ("cmpintX" may be omitted if not present in the
+		   hardware).
+- clocks : the clock feeding the timer clock.
+
+Example:
+
+	clocksource: timer@20000 {
+		compatible = "ti,da830-timer";
+		reg = <0x20000 0x1000>;
+		interrupts = <21>, <22>, <74>, <75>, <76>, <77>, <78>, <79>,
+			     <80>, <81>;
+		interrupt-names = "tint12", "tint34", "cmpint0", "cmpint1",
+				  "cmpint2", "cmpint3", "cmpint4", "cmpint5",
+				  "cmpint6", "cmpint7";
+		clocks = <&pll0_auxclk>;
+	};