Message ID | 20180323204128.29783-1-mdf@kernel.org |
---|---|
State | Not Applicable, archived |
Headers | show |
Series | [v5,1/2] dt-bindings: net: Add bindings for National Instruments XGE netdev | expand |
From: Moritz Fischer <mdf@kernel.org> Date: Fri, 23 Mar 2018 13:41:28 -0700 > +static void nixge_hw_dma_bd_release(struct net_device *ndev) > +{ > + int i; > + struct nixge_priv *priv = netdev_priv(ndev); Please order local variables from longest to shortest line (ie. reverse christmas tree layout). > +static int nixge_hw_dma_bd_init(struct net_device *ndev) > +{ > + u32 cr; > + int i; > + struct sk_buff *skb; > + struct nixge_priv *priv = netdev_priv(ndev); Likewise. > +static void __nixge_device_reset(struct nixge_priv *priv, off_t offset) > +{ > + u32 status; > + int err; > + /* Reset Axi DMA. This would reset NIXGE Ethernet core as well. > + * The reset process of Axi DMA takes a while to complete as all > + * pending commands/transfers will be flushed or completed during > + * this reset process. > + */ Please put an empty line between the local variable declarations and this comment. -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi David, On Mon, Mar 26, 2018 at 11:38:30AM -0400, David Miller wrote: > From: Moritz Fischer <mdf@kernel.org> > Date: Fri, 23 Mar 2018 13:41:28 -0700 > > > +static void nixge_hw_dma_bd_release(struct net_device *ndev) > > +{ > > + int i; > > + struct nixge_priv *priv = netdev_priv(ndev); > > Please order local variables from longest to shortest line (ie. reverse > christmas tree layout). Sure. > > > +static int nixge_hw_dma_bd_init(struct net_device *ndev) > > +{ > > + u32 cr; > > + int i; > > + struct sk_buff *skb; > > + struct nixge_priv *priv = netdev_priv(ndev); > > Likewise. Sure. > > > +static void __nixge_device_reset(struct nixge_priv *priv, off_t offset) > > +{ > > + u32 status; > > + int err; > > + /* Reset Axi DMA. This would reset NIXGE Ethernet core as well. > > + * The reset process of Axi DMA takes a while to complete as all > > + * pending commands/transfers will be flushed or completed during > > + * this reset process. > > + */ > > Please put an empty line between the local variable declarations > and this comment. Will do in v6 Thanks for your review! Cheers Moritz -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/net/nixge.txt b/Documentation/devicetree/bindings/net/nixge.txt new file mode 100644 index 000000000000..e55af7f0881a --- /dev/null +++ b/Documentation/devicetree/bindings/net/nixge.txt @@ -0,0 +1,32 @@ +* NI XGE Ethernet controller + +Required properties: +- compatible: Should be "ni,xge-enet-2.00" +- reg: Address and length of the register set for the device +- interrupts: Should contain tx and rx interrupt +- interrupt-names: Should be "rx" and "tx" +- phy-mode: See ethernet.txt file in the same directory. +- phy-handle: See ethernet.txt file in the same directory. +- nvmem-cells: Phandle of nvmem cell containing the MAC address +- nvmem-cell-names: Should be "address" + +Examples (10G generic PHY): + nixge0: ethernet@40000000 { + compatible = "ni,xge-enet-2.00"; + reg = <0x40000000 0x6000>; + + nvmem-cells = <ð1_addr>; + nvmem-cell-names = "address"; + + interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>, <0 30 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "rx", "tx"; + interrupt-parent = <&intc>; + + phy-mode = "xgmii"; + phy-handle = <ðernet_phy1>; + + ethernet_phy1: ethernet-phy@4 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <4>; + }; + };