| Message ID | 20170608002447.47580-2-s-anna@ti.com |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
On Wed, Jun 07, 2017 at 07:24:45PM -0500, Suman Anna wrote: > Add the device tree bindings document for the Texas Instrument's > Keystone 2 DSP remoteproc devices. > > Signed-off-by: Suman Anna <s-anna@ti.com> > Signed-off-by: Sam Nelson <sam.nelson@ti.com> > --- > v2 Changes: > - Modified the patch title > - Dropped unstable binding status > - Dropped the 'label' property and replaced the device node description > to use an alias > - Renamed 'kick-gpio' to 'kick-gpios' > - Updated the example > v1: https://patchwork.kernel.org/patch/9750839/ > > .../bindings/remoteproc/ti,keystone-rproc.txt | 135 +++++++++++++++++++++ > 1 file changed, 135 insertions(+) > create mode 100644 Documentation/devicetree/bindings/remoteproc/ti,keystone-rproc.txt > > diff --git a/Documentation/devicetree/bindings/remoteproc/ti,keystone-rproc.txt b/Documentation/devicetree/bindings/remoteproc/ti,keystone-rproc.txt > new file mode 100644 > index 000000000000..162229244d14 > --- /dev/null > +++ b/Documentation/devicetree/bindings/remoteproc/ti,keystone-rproc.txt > @@ -0,0 +1,135 @@ > +TI Keystone DSP devices > +======================= > + > +The TI Keystone 2 family of SoCs usually have one or more (upto 8) TI DSP Core > +sub-systems that are used to offload some of the processor-intensive tasks or > +algorithms, for achieving various system level goals. > + > +These processor sub-systems usually contain additional sub-modules like L1 > +and/or L2 caches/SRAMs, an Interrupt Controller, an external memory controller, > +a dedicated local power/sleep controller etc. The DSP processor core in > +Keystone 2 SoCs is usually a TMS320C66x CorePac processor. > + > +DSP Device Node: > +================ > +Each DSP Core sub-system is represented as a single DT node, and should also > +have an alias with the stem 'rproc' defined. Each node has a number of required > +or optional properties that enable the OS running on the host processor (ARM > +CorePac) to perform the device management of the remote processor and to > +communicate with the remote processor. > + > +Required properties: > +-------------------- > +The following are the mandatory properties: > + > +- compatible: Should be one of the following, > + "ti,k2hk-dsp" for DSPs on Keystone 2 66AK2H/K SoCs > + "ti,k2l-dsp" for DSPs on Keystone 2 66AK2L SoCs > + "ti,k2e-dsp" for DSPs on Keystone 2 66AK2E SoCs > + > +- reg: Should contain an entry for each value in 'reg-names'. > + Each entry should have the memory region's start address > + and the size of the region, the representation matching > + the parent node's '#address-cells' and '#size-cells' values. > + > +- reg-names: Should contain strings with the following names, each > + representing a specific internal memory region, and > + should be defined in this order, > + "l2sram", "l1pram", "l1dram" > + > +- clocks: Should contain the device's input clock, and should be > + defined as per the bindings in, > + Documentation/devicetree/bindings/clock/keystone-gate.txt > + > +- ti,syscon-dev: Should be a pair of the phandle to the Keystone Device > + State Control node, and the register offset of the DSP > + boot address register within that node's address space. > + > +- resets: Should contain the phandle to the reset controller node > + managing the resets for this device, and a reset > + specifier. Please refer to the following reset bindings > + for the reset argument specifier as per SoC, > + Documentation/devicetree/bindings/reset/ti-syscon-reset.txt > + for 66AK2HK/66AK2L/66AK2E SoCs > + > +- interrupt-parent: Should contain a phandle to the Keystone 2 IRQ controller > + IP node that is used by the ARM CorePac processor to > + receive interrupts from the DSP remote processors. See > + Documentation/devicetree/bindings/interrupt-controller/ti,keystone-irq.txt > + for details. > + > +- interrupts: Should contain an entry for each value in 'interrupt-names'. > + Each entry should have the interrupt source number used by > + the remote processor to the host processor. The values should > + follow the interrupt-specifier format as dictated by the > + 'interrupt-parent' node. The purpose of each is as per the > + description in the 'interrupt-names' property. > + > +- interrupt-names: Should contain strings with the following names, each > + representing a specific interrupt, > + "vring" - interrupt for virtio based IPC > + "exception" - interrupt for exception notification > + > +- kick-gpios: Should specify the gpio device needed for the virtio IPC > + stack. This will be used to interrupt the remote processor. > + The gpio device to be used is as per the bindings in, > + Documentation/devicetree/bindings/gpio/gpio-dsp-keystone.txt > + > +Optional properties: > +-------------------- > + > +- memory-region: phandle to the reserved memory node to be associated > + with the remoteproc device. The reserved memory node > + can be a CMA memory node, and should be defined as > + per the bindings in > + Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt > + > + > +Example: > +-------- > + /* 66AK2H/K DSP aliases */ > + aliases { > + rproc0 = &dsp0; > + rproc1 = &dsp1; > + rproc2 = &dsp2; > + rproc3 = &dsp3; > + rproc4 = &dsp4; > + rproc5 = &dsp5; > + rproc6 = &dsp6; > + rproc7 = &dsp7; > + }; > + > + /* 66AK2H/K DSP memory node */ > + reserved-memory { > + #address-cells = <2>; > + #size-cells = <2>; > + ranges; > + > + dsp_common_memory: dsp-common-memory@81f800000 { > + compatible = "shared-dma-pool"; > + reg = <0x00000008 0x1f800000 0x00000000 0x800000>; > + reusable; > + }; > + }; > + > + /* 66AK2H/K DSP node */ > + soc { > + dsp0: dsp@10800000 { > + compatible = "ti,k2hk-dsp"; > + reg = <0x10800000 0x00100000>, > + <0x10e00000 0x00008000>, > + <0x10f00000 0x00008000>; > + reg-names = "l2sram", "l1pram", "l1dram"; > + label = "dsp0"; Need to drop this. With that, Acked-by: Rob Herring <robh@kernel.org> > + clocks = <&clkgem0>; > + ti,syscon-dev = <&devctrl 0x40>; > + resets = <&pscrst 0>; > + interrupt-parent = <&kirq0>; > + interrupts = <0 8>; > + interrupt-names = "vring", "exception"; > + kick-gpios = <&dspgpio0 27 0>; > + memory-region = <&dsp_common_memory>; > + }; > + > + }; > + > -- > 2.12.0 > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 6/7/2017 5:24 PM, Suman Anna wrote: > Add the device tree bindings document for the Texas Instrument's > Keystone 2 DSP remoteproc devices. > > Signed-off-by: Suman Anna <s-anna@ti.com> > Signed-off-by: Sam Nelson <sam.nelson@ti.com> > --- > v2 Changes: > - Modified the patch title > - Dropped unstable binding status > - Dropped the 'label' property and replaced the device node description > to use an alias > - Renamed 'kick-gpio' to 'kick-gpios' > - Updated the example Looks reasonable to me. Ofcourse you need Rob's ack for this one. Acked-by: Santosh Shilimkar <ssantosh@kernel.org> -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/remoteproc/ti,keystone-rproc.txt b/Documentation/devicetree/bindings/remoteproc/ti,keystone-rproc.txt new file mode 100644 index 000000000000..162229244d14 --- /dev/null +++ b/Documentation/devicetree/bindings/remoteproc/ti,keystone-rproc.txt @@ -0,0 +1,135 @@ +TI Keystone DSP devices +======================= + +The TI Keystone 2 family of SoCs usually have one or more (upto 8) TI DSP Core +sub-systems that are used to offload some of the processor-intensive tasks or +algorithms, for achieving various system level goals. + +These processor sub-systems usually contain additional sub-modules like L1 +and/or L2 caches/SRAMs, an Interrupt Controller, an external memory controller, +a dedicated local power/sleep controller etc. The DSP processor core in +Keystone 2 SoCs is usually a TMS320C66x CorePac processor. + +DSP Device Node: +================ +Each DSP Core sub-system is represented as a single DT node, and should also +have an alias with the stem 'rproc' defined. Each node has a number of required +or optional properties that enable the OS running on the host processor (ARM +CorePac) to perform the device management of the remote processor and to +communicate with the remote processor. + +Required properties: +-------------------- +The following are the mandatory properties: + +- compatible: Should be one of the following, + "ti,k2hk-dsp" for DSPs on Keystone 2 66AK2H/K SoCs + "ti,k2l-dsp" for DSPs on Keystone 2 66AK2L SoCs + "ti,k2e-dsp" for DSPs on Keystone 2 66AK2E SoCs + +- reg: Should contain an entry for each value in 'reg-names'. + Each entry should have the memory region's start address + and the size of the region, the representation matching + the parent node's '#address-cells' and '#size-cells' values. + +- reg-names: Should contain strings with the following names, each + representing a specific internal memory region, and + should be defined in this order, + "l2sram", "l1pram", "l1dram" + +- clocks: Should contain the device's input clock, and should be + defined as per the bindings in, + Documentation/devicetree/bindings/clock/keystone-gate.txt + +- ti,syscon-dev: Should be a pair of the phandle to the Keystone Device + State Control node, and the register offset of the DSP + boot address register within that node's address space. + +- resets: Should contain the phandle to the reset controller node + managing the resets for this device, and a reset + specifier. Please refer to the following reset bindings + for the reset argument specifier as per SoC, + Documentation/devicetree/bindings/reset/ti-syscon-reset.txt + for 66AK2HK/66AK2L/66AK2E SoCs + +- interrupt-parent: Should contain a phandle to the Keystone 2 IRQ controller + IP node that is used by the ARM CorePac processor to + receive interrupts from the DSP remote processors. See + Documentation/devicetree/bindings/interrupt-controller/ti,keystone-irq.txt + for details. + +- interrupts: Should contain an entry for each value in 'interrupt-names'. + Each entry should have the interrupt source number used by + the remote processor to the host processor. The values should + follow the interrupt-specifier format as dictated by the + 'interrupt-parent' node. The purpose of each is as per the + description in the 'interrupt-names' property. + +- interrupt-names: Should contain strings with the following names, each + representing a specific interrupt, + "vring" - interrupt for virtio based IPC + "exception" - interrupt for exception notification + +- kick-gpios: Should specify the gpio device needed for the virtio IPC + stack. This will be used to interrupt the remote processor. + The gpio device to be used is as per the bindings in, + Documentation/devicetree/bindings/gpio/gpio-dsp-keystone.txt + +Optional properties: +-------------------- + +- memory-region: phandle to the reserved memory node to be associated + with the remoteproc device. The reserved memory node + can be a CMA memory node, and should be defined as + per the bindings in + Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt + + +Example: +-------- + /* 66AK2H/K DSP aliases */ + aliases { + rproc0 = &dsp0; + rproc1 = &dsp1; + rproc2 = &dsp2; + rproc3 = &dsp3; + rproc4 = &dsp4; + rproc5 = &dsp5; + rproc6 = &dsp6; + rproc7 = &dsp7; + }; + + /* 66AK2H/K DSP memory node */ + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + dsp_common_memory: dsp-common-memory@81f800000 { + compatible = "shared-dma-pool"; + reg = <0x00000008 0x1f800000 0x00000000 0x800000>; + reusable; + }; + }; + + /* 66AK2H/K DSP node */ + soc { + dsp0: dsp@10800000 { + compatible = "ti,k2hk-dsp"; + reg = <0x10800000 0x00100000>, + <0x10e00000 0x00008000>, + <0x10f00000 0x00008000>; + reg-names = "l2sram", "l1pram", "l1dram"; + label = "dsp0"; + clocks = <&clkgem0>; + ti,syscon-dev = <&devctrl 0x40>; + resets = <&pscrst 0>; + interrupt-parent = <&kirq0>; + interrupts = <0 8>; + interrupt-names = "vring", "exception"; + kick-gpios = <&dspgpio0 27 0>; + memory-region = <&dsp_common_memory>; + }; + + }; +