new file mode 100644
@@ -0,0 +1,27 @@
+Binding for Imagination Technologies MIPS Boston clock sources.
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : Should be "img,boston-clock".
+- #clock-cells : Should be set to 1.
+ Values available for clock consumers can be found in the header file:
+ <dt-bindings/clock/boston-clock.h>
+- regmap : Phandle to the Boston platform register system controller.
+ This should contain a phandle to the system controller node covering the
+ platform registers provided by the Boston board.
+
+Example:
+
+ clk_boston: clock {
+ compatible = "img,boston-clock";
+ #clock-cells = <1>;
+ regmap = <&plat_regs>;
+ };
+
+ uart0: uart@17ffe000 {
+ /* ... */
+ clocks = <&clk_boston BOSTON_CLK_SYS>;
+ };
new file mode 100644
@@ -0,0 +1,14 @@
+/*
+ * Copyright (C) 2016 Imagination Technologies
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_BOSTON_CLOCK_H__
+#define __DT_BINDINGS_CLOCK_BOSTON_CLOCK_H__
+
+#define BOSTON_CLK_INPUT 0
+#define BOSTON_CLK_SYS 1
+#define BOSTON_CLK_CPU 2
+
+#endif /* __DT_BINDINGS_CLOCK_BOSTON_CLOCK_H__ */
Add device tree binding documentation for the clocks provided by the MIPS Boston development board from Imagination Technologies, and a header file describing the available clocks for use by device trees & driver. Signed-off-by: Paul Burton <paul.burton@imgtec.com> --- Changes in v2: - Add BOSTON_CLK_INPUT to expose the input clock. .../devicetree/bindings/clock/img,boston-clock.txt | 27 ++++++++++++++++++++++ include/dt-bindings/clock/boston-clock.h | 14 +++++++++++ 2 files changed, 41 insertions(+) create mode 100644 Documentation/devicetree/bindings/clock/img,boston-clock.txt create mode 100644 include/dt-bindings/clock/boston-clock.h