@@ -7,7 +7,16 @@ Required properties:
which correspond to thermal cooling states
Optional properties:
-- fan-supply : phandle to the regulator that provides power to the fan
+- fan-supply : phandle to the regulator that provides power to the fan
+- interrupts : This contains a single interrupt specifier which
+ describes the tachometer output of the fan as an
+ interrupt source. The output signal must generate a
+ defined number of interrupts per fan revolution, which
+ require that it must be self resetting edge interrupts.
+ See interrupt-controller/interrupts.txt for the format.
+- pulses-per-revolution : define the tachometer pulses per fan revolution as
+ an integer (default is 2 interrupts per revolution).
+ The value must be greater than zero.
Example:
fan0: pwm-fan {
@@ -38,3 +47,13 @@ Example:
};
};
};
+
+Example 2:
+ fan0: pwm-fan {
+ compatible = "pwm-fan";
+ pwms = <&pwm 0 40000 0>;
+ fan-supply = <®_fan>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+ pulses-per-revolution = <2>;
+ };