diff mbox series

[V3] dt-bindings: interrupt-controller: Update csky mpintc

Message ID 1548168884-17742-1-git-send-email-guoren@kernel.org
State Not Applicable, archived
Headers show
Series [V3] dt-bindings: interrupt-controller: Update csky mpintc | expand

Checks

Context Check Description
robh/checkpatch success

Commit Message

Guo Ren Jan. 22, 2019, 2:54 p.m. UTC 
From: Guo Ren <ren_guo@c-sky.com>

Add trigger type and priority setting for csky,mpintc.

Changelog:
 - change #interrupt-cells to <3>

Signed-off-by: Guo Ren <ren_guo@c-sky.com>
Cc: Rob Herring <robh+dt@kernel.org>
---
 .../bindings/interrupt-controller/csky,mpintc.txt   | 21 +++++++++++++++++----
 1 file changed, 17 insertions(+), 4 deletions(-)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/interrupt-controller/csky,mpintc.txt b/Documentation/devicetree/bindings/interrupt-controller/csky,mpintc.txt
index ab921f1..dccd913 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/csky,mpintc.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/csky,mpintc.txt
@@ -6,11 +6,18 @@  C-SKY Multi-processors Interrupt Controller is designed for ck807/ck810/ck860
 SMP soc, and it also could be used in non-SMP system.
 
 Interrupt number definition:
-
   0-15  : software irq, and we use 15 as our IPI_IRQ.
  16-31  : private  irq, and we use 16 as the co-processor timer.
  31-1024: common irq for soc ip.
 
+Interrupt triger mode:
+ IRQ_TYPE_LEVEL_HIGH (default)
+ IRQ_TYPE_LEVEL_LOW
+ IRQ_TYPE_EDGE_RISING
+ IRQ_TYPE_EDGE_FALLING
+
+Interrupt priority range: 0-255
+
 =============================
 intc node bindings definition
 =============================
@@ -26,15 +33,21 @@  intc node bindings definition
 	- #interrupt-cells
 		Usage: required
 		Value type: <u32>
-		Definition: must be <1>
+		Definition: <3>
 	- interrupt-controller:
 		Usage: required
 
-Examples:
+Examples: ("interrupts = <irq_num IRQ_TYPE_XXX priority>")
 ---------
 
 	intc: interrupt-controller {
 		compatible = "csky,mpintc";
-		#interrupt-cells = <1>;
+		#interrupt-cells = <3>;
 		interrupt-controller;
 	};
+
+	device: device-example {
+		...
+		interrupts = <34 IRQ_TYPE_EDGE_RISING 254>;
+		interrupt-parent = <&intc>;
+	};