From patchwork Tue May 1 19:30:36 2018 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Thor Thayer X-Patchwork-Id: 907189 Return-Path: X-Original-To: incoming-dt@patchwork.ozlabs.org Delivered-To: patchwork-incoming-dt@bilbo.ozlabs.org Authentication-Results: ozlabs.org; spf=none (mailfrom) smtp.mailfrom=vger.kernel.org (client-ip=209.132.180.67; helo=vger.kernel.org; envelope-from=devicetree-owner@vger.kernel.org; receiver=) Authentication-Results: ozlabs.org; dmarc=none (p=none dis=none) header.from=linux.intel.com Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by ozlabs.org (Postfix) with ESMTP id 40bBJx0QQwz9s1d for ; Wed, 2 May 2018 05:28:17 +1000 (AEST) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1750823AbeEAT2P (ORCPT ); Tue, 1 May 2018 15:28:15 -0400 Received: from mga06.intel.com ([134.134.136.31]:17894 "EHLO mga06.intel.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750803AbeEAT2P (ORCPT ); Tue, 1 May 2018 15:28:15 -0400 X-Amp-Result: SKIPPED(no attachment in message) X-Amp-File-Uploaded: False Received: from fmsmga001.fm.intel.com ([10.253.24.23]) by orsmga104.jf.intel.com with ESMTP/TLS/DHE-RSA-AES256-GCM-SHA384; 01 May 2018 12:28:14 -0700 X-ExtLoop1: 1 X-IronPort-AV: E=Sophos;i="5.49,352,1520924400"; d="scan'208";a="51520920" Received: from tthayer-hp-z620-workstation.an.intel.com ([10.122.105.144]) by fmsmga001.fm.intel.com with ESMTP; 01 May 2018 12:28:13 -0700 From: thor.thayer@linux.intel.com To: robh+dt@kernel.org, bp@alien8.de, mchehab@kernel.org Cc: devicetree@vger.kernel.org, linux-edac@vger.kernel.org, Thor Thayer Subject: [PATCH] Documentation: dt: edac: Move Altera SOCFPGA EDAC file Date: Tue, 1 May 2018 14:30:36 -0500 Message-Id: <1525203036-21774-1-git-send-email-thor.thayer@linux.intel.com> X-Mailer: git-send-email 2.7.4 Sender: devicetree-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org From: Thor Thayer Move the Altera SOCFPGA EDAC file from bindings/arm/altera to bindings/edac. Signed-off-by: Thor Thayer Acked-by: Rob Herring --- .../bindings/arm/altera/socfpga-eccmgr.txt | 268 --------------------- .../devicetree/bindings/edac/socfpga-eccmgr.txt | 268 +++++++++++++++++++++ 2 files changed, 268 insertions(+), 268 deletions(-) delete mode 100644 Documentation/devicetree/bindings/arm/altera/socfpga-eccmgr.txt create mode 100644 Documentation/devicetree/bindings/edac/socfpga-eccmgr.txt diff --git a/Documentation/devicetree/bindings/arm/altera/socfpga-eccmgr.txt b/Documentation/devicetree/bindings/arm/altera/socfpga-eccmgr.txt deleted file mode 100644 index 5626560a6cfd..000000000000 --- a/Documentation/devicetree/bindings/arm/altera/socfpga-eccmgr.txt +++ /dev/null @@ -1,268 +0,0 @@ -Altera SoCFPGA ECC Manager -This driver uses the EDAC framework to implement the SOCFPGA ECC Manager. -The ECC Manager counts and corrects single bit errors and counts/handles -double bit errors which are uncorrectable. - -Cyclone5 and Arria5 ECC Manager -Required Properties: -- compatible : Should be "altr,socfpga-ecc-manager" -- #address-cells: must be 1 -- #size-cells: must be 1 -- ranges : standard definition, should translate from local addresses - -Subcomponents: - -L2 Cache ECC -Required Properties: -- compatible : Should be "altr,socfpga-l2-ecc" -- reg : Address and size for ECC error interrupt clear registers. -- interrupts : Should be single bit error interrupt, then double bit error - interrupt. Note the rising edge type. - -On Chip RAM ECC -Required Properties: -- compatible : Should be "altr,socfpga-ocram-ecc" -- reg : Address and size for ECC error interrupt clear registers. -- iram : phandle to On-Chip RAM definition. -- interrupts : Should be single bit error interrupt, then double bit error - interrupt. Note the rising edge type. - -Example: - - eccmgr: eccmgr@ffd08140 { - compatible = "altr,socfpga-ecc-manager"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - l2-ecc@ffd08140 { - compatible = "altr,socfpga-l2-ecc"; - reg = <0xffd08140 0x4>; - interrupts = <0 36 1>, <0 37 1>; - }; - - ocram-ecc@ffd08144 { - compatible = "altr,socfpga-ocram-ecc"; - reg = <0xffd08144 0x4>; - iram = <&ocram>; - interrupts = <0 178 1>, <0 179 1>; - }; - }; - -Arria10 SoCFPGA ECC Manager -The Arria10 SoC ECC Manager handles the IRQs for each peripheral -in a shared register instead of individual IRQs like the Cyclone5 -and Arria5. Therefore the device tree is different as well. - -Required Properties: -- compatible : Should be "altr,socfpga-a10-ecc-manager" -- altr,sysgr-syscon : phandle to Arria10 System Manager Block - containing the ECC manager registers. -- #address-cells: must be 1 -- #size-cells: must be 1 -- interrupts : Should be single bit error interrupt, then double bit error - interrupt. -- interrupt-controller : boolean indicator that ECC Manager is an interrupt controller -- #interrupt-cells : must be set to 2. -- ranges : standard definition, should translate from local addresses - -Subcomponents: - -L2 Cache ECC -Required Properties: -- compatible : Should be "altr,socfpga-a10-l2-ecc" -- reg : Address and size for ECC error interrupt clear registers. -- interrupts : Should be single bit error interrupt, then double bit error - interrupt, in this order. - -On-Chip RAM ECC -Required Properties: -- compatible : Should be "altr,socfpga-a10-ocram-ecc" -- reg : Address and size for ECC block registers. -- interrupts : Should be single bit error interrupt, then double bit error - interrupt, in this order. - -Ethernet FIFO ECC -Required Properties: -- compatible : Should be "altr,socfpga-eth-mac-ecc" -- reg : Address and size for ECC block registers. -- altr,ecc-parent : phandle to parent Ethernet node. -- interrupts : Should be single bit error interrupt, then double bit error - interrupt, in this order. - -NAND FIFO ECC -Required Properties: -- compatible : Should be "altr,socfpga-nand-ecc" -- reg : Address and size for ECC block registers. -- altr,ecc-parent : phandle to parent NAND node. -- interrupts : Should be single bit error interrupt, then double bit error - interrupt, in this order. - -DMA FIFO ECC -Required Properties: -- compatible : Should be "altr,socfpga-dma-ecc" -- reg : Address and size for ECC block registers. -- altr,ecc-parent : phandle to parent DMA node. -- interrupts : Should be single bit error interrupt, then double bit error - interrupt, in this order. - -USB FIFO ECC -Required Properties: -- compatible : Should be "altr,socfpga-usb-ecc" -- reg : Address and size for ECC block registers. -- altr,ecc-parent : phandle to parent USB node. -- interrupts : Should be single bit error interrupt, then double bit error - interrupt, in this order. - -QSPI FIFO ECC -Required Properties: -- compatible : Should be "altr,socfpga-qspi-ecc" -- reg : Address and size for ECC block registers. -- altr,ecc-parent : phandle to parent QSPI node. -- interrupts : Should be single bit error interrupt, then double bit error - interrupt, in this order. - -SDMMC FIFO ECC -Required Properties: -- compatible : Should be "altr,socfpga-sdmmc-ecc" -- reg : Address and size for ECC block registers. -- altr,ecc-parent : phandle to parent SD/MMC node. -- interrupts : Should be single bit error interrupt, then double bit error - interrupt, in this order for port A, and then single bit error interrupt, - then double bit error interrupt in this order for port B. - -Example: - - eccmgr: eccmgr@ffd06000 { - compatible = "altr,socfpga-a10-ecc-manager"; - altr,sysmgr-syscon = <&sysmgr>; - #address-cells = <1>; - #size-cells = <1>; - interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>, - <0 0 IRQ_TYPE_LEVEL_HIGH>; - interrupt-controller; - #interrupt-cells = <2>; - ranges; - - l2-ecc@ffd06010 { - compatible = "altr,socfpga-a10-l2-ecc"; - reg = <0xffd06010 0x4>; - interrupts = <0 IRQ_TYPE_LEVEL_HIGH>, - <32 IRQ_TYPE_LEVEL_HIGH>; - }; - - ocram-ecc@ff8c3000 { - compatible = "altr,socfpga-a10-ocram-ecc"; - reg = <0xff8c3000 0x90>; - interrupts = <1 IRQ_TYPE_LEVEL_HIGH>, - <33 IRQ_TYPE_LEVEL_HIGH> ; - }; - - emac0-rx-ecc@ff8c0800 { - compatible = "altr,socfpga-eth-mac-ecc"; - reg = <0xff8c0800 0x400>; - altr,ecc-parent = <&gmac0>; - interrupts = <4 IRQ_TYPE_LEVEL_HIGH>, - <36 IRQ_TYPE_LEVEL_HIGH>; - }; - - emac0-tx-ecc@ff8c0c00 { - compatible = "altr,socfpga-eth-mac-ecc"; - reg = <0xff8c0c00 0x400>; - altr,ecc-parent = <&gmac0>; - interrupts = <5 IRQ_TYPE_LEVEL_HIGH>, - <37 IRQ_TYPE_LEVEL_HIGH>; - }; - - nand-buf-ecc@ff8c2000 { - compatible = "altr,socfpga-nand-ecc"; - reg = <0xff8c2000 0x400>; - altr,ecc-parent = <&nand>; - interrupts = <11 IRQ_TYPE_LEVEL_HIGH>, - <43 IRQ_TYPE_LEVEL_HIGH>; - }; - - nand-rd-ecc@ff8c2400 { - compatible = "altr,socfpga-nand-ecc"; - reg = <0xff8c2400 0x400>; - altr,ecc-parent = <&nand>; - interrupts = <13 IRQ_TYPE_LEVEL_HIGH>, - <45 IRQ_TYPE_LEVEL_HIGH>; - }; - - nand-wr-ecc@ff8c2800 { - compatible = "altr,socfpga-nand-ecc"; - reg = <0xff8c2800 0x400>; - altr,ecc-parent = <&nand>; - interrupts = <12 IRQ_TYPE_LEVEL_HIGH>, - <44 IRQ_TYPE_LEVEL_HIGH>; - }; - - dma-ecc@ff8c8000 { - compatible = "altr,socfpga-dma-ecc"; - reg = <0xff8c8000 0x400>; - altr,ecc-parent = <&pdma>; - interrupts = <10 IRQ_TYPE_LEVEL_HIGH>, - <42 IRQ_TYPE_LEVEL_HIGH>; - - usb0-ecc@ff8c8800 { - compatible = "altr,socfpga-usb-ecc"; - reg = <0xff8c8800 0x400>; - altr,ecc-parent = <&usb0>; - interrupts = <2 IRQ_TYPE_LEVEL_HIGH>, - <34 IRQ_TYPE_LEVEL_HIGH>; - }; - - qspi-ecc@ff8c8400 { - compatible = "altr,socfpga-qspi-ecc"; - reg = <0xff8c8400 0x400>; - altr,ecc-parent = <&qspi>; - interrupts = <14 IRQ_TYPE_LEVEL_HIGH>, - <46 IRQ_TYPE_LEVEL_HIGH>; - }; - - sdmmc-ecc@ff8c2c00 { - compatible = "altr,socfpga-sdmmc-ecc"; - reg = <0xff8c2c00 0x400>; - altr,ecc-parent = <&mmc>; - interrupts = <15 IRQ_TYPE_LEVEL_HIGH>, - <47 IRQ_TYPE_LEVEL_HIGH>, - <16 IRQ_TYPE_LEVEL_HIGH>, - <48 IRQ_TYPE_LEVEL_HIGH>; - }; - }; - -Stratix10 SoCFPGA ECC Manager -The Stratix10 SoC ECC Manager handles the IRQs for each peripheral -in a shared register similar to the Arria10. However, ECC requires -access to registers that can only be read from Secure Monitor with -SMC calls. Therefore the device tree is slightly different. - -Required Properties: -- compatible : Should be "altr,socfpga-s10-ecc-manager" -- interrupts : Should be single bit error interrupt, then double bit error - interrupt. -- interrupt-controller : boolean indicator that ECC Manager is an interrupt controller -- #interrupt-cells : must be set to 2. - -Subcomponents: - -SDRAM ECC -Required Properties: -- compatible : Should be "altr,sdram-edac-s10" -- interrupts : Should be single bit error interrupt, then double bit error - interrupt, in this order. - -Example: - - eccmgr { - compatible = "altr,socfpga-s10-ecc-manager"; - interrupts = <0 15 4>, <0 95 4>; - interrupt-controller; - #interrupt-cells = <2>; - - sdramedac { - compatible = "altr,sdram-edac-s10"; - interrupts = <16 4>, <48 4>; - }; - }; diff --git a/Documentation/devicetree/bindings/edac/socfpga-eccmgr.txt b/Documentation/devicetree/bindings/edac/socfpga-eccmgr.txt new file mode 100644 index 000000000000..5626560a6cfd --- /dev/null +++ b/Documentation/devicetree/bindings/edac/socfpga-eccmgr.txt @@ -0,0 +1,268 @@ +Altera SoCFPGA ECC Manager +This driver uses the EDAC framework to implement the SOCFPGA ECC Manager. +The ECC Manager counts and corrects single bit errors and counts/handles +double bit errors which are uncorrectable. + +Cyclone5 and Arria5 ECC Manager +Required Properties: +- compatible : Should be "altr,socfpga-ecc-manager" +- #address-cells: must be 1 +- #size-cells: must be 1 +- ranges : standard definition, should translate from local addresses + +Subcomponents: + +L2 Cache ECC +Required Properties: +- compatible : Should be "altr,socfpga-l2-ecc" +- reg : Address and size for ECC error interrupt clear registers. +- interrupts : Should be single bit error interrupt, then double bit error + interrupt. Note the rising edge type. + +On Chip RAM ECC +Required Properties: +- compatible : Should be "altr,socfpga-ocram-ecc" +- reg : Address and size for ECC error interrupt clear registers. +- iram : phandle to On-Chip RAM definition. +- interrupts : Should be single bit error interrupt, then double bit error + interrupt. Note the rising edge type. + +Example: + + eccmgr: eccmgr@ffd08140 { + compatible = "altr,socfpga-ecc-manager"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + l2-ecc@ffd08140 { + compatible = "altr,socfpga-l2-ecc"; + reg = <0xffd08140 0x4>; + interrupts = <0 36 1>, <0 37 1>; + }; + + ocram-ecc@ffd08144 { + compatible = "altr,socfpga-ocram-ecc"; + reg = <0xffd08144 0x4>; + iram = <&ocram>; + interrupts = <0 178 1>, <0 179 1>; + }; + }; + +Arria10 SoCFPGA ECC Manager +The Arria10 SoC ECC Manager handles the IRQs for each peripheral +in a shared register instead of individual IRQs like the Cyclone5 +and Arria5. Therefore the device tree is different as well. + +Required Properties: +- compatible : Should be "altr,socfpga-a10-ecc-manager" +- altr,sysgr-syscon : phandle to Arria10 System Manager Block + containing the ECC manager registers. +- #address-cells: must be 1 +- #size-cells: must be 1 +- interrupts : Should be single bit error interrupt, then double bit error + interrupt. +- interrupt-controller : boolean indicator that ECC Manager is an interrupt controller +- #interrupt-cells : must be set to 2. +- ranges : standard definition, should translate from local addresses + +Subcomponents: + +L2 Cache ECC +Required Properties: +- compatible : Should be "altr,socfpga-a10-l2-ecc" +- reg : Address and size for ECC error interrupt clear registers. +- interrupts : Should be single bit error interrupt, then double bit error + interrupt, in this order. + +On-Chip RAM ECC +Required Properties: +- compatible : Should be "altr,socfpga-a10-ocram-ecc" +- reg : Address and size for ECC block registers. +- interrupts : Should be single bit error interrupt, then double bit error + interrupt, in this order. + +Ethernet FIFO ECC +Required Properties: +- compatible : Should be "altr,socfpga-eth-mac-ecc" +- reg : Address and size for ECC block registers. +- altr,ecc-parent : phandle to parent Ethernet node. +- interrupts : Should be single bit error interrupt, then double bit error + interrupt, in this order. + +NAND FIFO ECC +Required Properties: +- compatible : Should be "altr,socfpga-nand-ecc" +- reg : Address and size for ECC block registers. +- altr,ecc-parent : phandle to parent NAND node. +- interrupts : Should be single bit error interrupt, then double bit error + interrupt, in this order. + +DMA FIFO ECC +Required Properties: +- compatible : Should be "altr,socfpga-dma-ecc" +- reg : Address and size for ECC block registers. +- altr,ecc-parent : phandle to parent DMA node. +- interrupts : Should be single bit error interrupt, then double bit error + interrupt, in this order. + +USB FIFO ECC +Required Properties: +- compatible : Should be "altr,socfpga-usb-ecc" +- reg : Address and size for ECC block registers. +- altr,ecc-parent : phandle to parent USB node. +- interrupts : Should be single bit error interrupt, then double bit error + interrupt, in this order. + +QSPI FIFO ECC +Required Properties: +- compatible : Should be "altr,socfpga-qspi-ecc" +- reg : Address and size for ECC block registers. +- altr,ecc-parent : phandle to parent QSPI node. +- interrupts : Should be single bit error interrupt, then double bit error + interrupt, in this order. + +SDMMC FIFO ECC +Required Properties: +- compatible : Should be "altr,socfpga-sdmmc-ecc" +- reg : Address and size for ECC block registers. +- altr,ecc-parent : phandle to parent SD/MMC node. +- interrupts : Should be single bit error interrupt, then double bit error + interrupt, in this order for port A, and then single bit error interrupt, + then double bit error interrupt in this order for port B. + +Example: + + eccmgr: eccmgr@ffd06000 { + compatible = "altr,socfpga-a10-ecc-manager"; + altr,sysmgr-syscon = <&sysmgr>; + #address-cells = <1>; + #size-cells = <1>; + interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>, + <0 0 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + ranges; + + l2-ecc@ffd06010 { + compatible = "altr,socfpga-a10-l2-ecc"; + reg = <0xffd06010 0x4>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>, + <32 IRQ_TYPE_LEVEL_HIGH>; + }; + + ocram-ecc@ff8c3000 { + compatible = "altr,socfpga-a10-ocram-ecc"; + reg = <0xff8c3000 0x90>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH>, + <33 IRQ_TYPE_LEVEL_HIGH> ; + }; + + emac0-rx-ecc@ff8c0800 { + compatible = "altr,socfpga-eth-mac-ecc"; + reg = <0xff8c0800 0x400>; + altr,ecc-parent = <&gmac0>; + interrupts = <4 IRQ_TYPE_LEVEL_HIGH>, + <36 IRQ_TYPE_LEVEL_HIGH>; + }; + + emac0-tx-ecc@ff8c0c00 { + compatible = "altr,socfpga-eth-mac-ecc"; + reg = <0xff8c0c00 0x400>; + altr,ecc-parent = <&gmac0>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH>, + <37 IRQ_TYPE_LEVEL_HIGH>; + }; + + nand-buf-ecc@ff8c2000 { + compatible = "altr,socfpga-nand-ecc"; + reg = <0xff8c2000 0x400>; + altr,ecc-parent = <&nand>; + interrupts = <11 IRQ_TYPE_LEVEL_HIGH>, + <43 IRQ_TYPE_LEVEL_HIGH>; + }; + + nand-rd-ecc@ff8c2400 { + compatible = "altr,socfpga-nand-ecc"; + reg = <0xff8c2400 0x400>; + altr,ecc-parent = <&nand>; + interrupts = <13 IRQ_TYPE_LEVEL_HIGH>, + <45 IRQ_TYPE_LEVEL_HIGH>; + }; + + nand-wr-ecc@ff8c2800 { + compatible = "altr,socfpga-nand-ecc"; + reg = <0xff8c2800 0x400>; + altr,ecc-parent = <&nand>; + interrupts = <12 IRQ_TYPE_LEVEL_HIGH>, + <44 IRQ_TYPE_LEVEL_HIGH>; + }; + + dma-ecc@ff8c8000 { + compatible = "altr,socfpga-dma-ecc"; + reg = <0xff8c8000 0x400>; + altr,ecc-parent = <&pdma>; + interrupts = <10 IRQ_TYPE_LEVEL_HIGH>, + <42 IRQ_TYPE_LEVEL_HIGH>; + + usb0-ecc@ff8c8800 { + compatible = "altr,socfpga-usb-ecc"; + reg = <0xff8c8800 0x400>; + altr,ecc-parent = <&usb0>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH>, + <34 IRQ_TYPE_LEVEL_HIGH>; + }; + + qspi-ecc@ff8c8400 { + compatible = "altr,socfpga-qspi-ecc"; + reg = <0xff8c8400 0x400>; + altr,ecc-parent = <&qspi>; + interrupts = <14 IRQ_TYPE_LEVEL_HIGH>, + <46 IRQ_TYPE_LEVEL_HIGH>; + }; + + sdmmc-ecc@ff8c2c00 { + compatible = "altr,socfpga-sdmmc-ecc"; + reg = <0xff8c2c00 0x400>; + altr,ecc-parent = <&mmc>; + interrupts = <15 IRQ_TYPE_LEVEL_HIGH>, + <47 IRQ_TYPE_LEVEL_HIGH>, + <16 IRQ_TYPE_LEVEL_HIGH>, + <48 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + +Stratix10 SoCFPGA ECC Manager +The Stratix10 SoC ECC Manager handles the IRQs for each peripheral +in a shared register similar to the Arria10. However, ECC requires +access to registers that can only be read from Secure Monitor with +SMC calls. Therefore the device tree is slightly different. + +Required Properties: +- compatible : Should be "altr,socfpga-s10-ecc-manager" +- interrupts : Should be single bit error interrupt, then double bit error + interrupt. +- interrupt-controller : boolean indicator that ECC Manager is an interrupt controller +- #interrupt-cells : must be set to 2. + +Subcomponents: + +SDRAM ECC +Required Properties: +- compatible : Should be "altr,sdram-edac-s10" +- interrupts : Should be single bit error interrupt, then double bit error + interrupt, in this order. + +Example: + + eccmgr { + compatible = "altr,socfpga-s10-ecc-manager"; + interrupts = <0 15 4>, <0 95 4>; + interrupt-controller; + #interrupt-cells = <2>; + + sdramedac { + compatible = "altr,sdram-edac-s10"; + interrupts = <16 4>, <48 4>; + }; + };