| Message ID | 1512701860-8321-3-git-send-email-david@lechnology.com |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
| Series | Bluetooth: hci_ll: Get BD address from NVMEM (was "bluetooth: hci_ll: Get MAC address from NVMEM") | expand |
Hi David, > This adds optional nvmem consumer properties to the ti,wlink-st device tree > bindings to allow specifying the BD address. > > Signed-off-by: David Lechner <david@lechnology.com> > --- > > v2 changes: > * Renamed "mac-address" to "bd-address" > * Fixed typos in example > * Specify byte order of "bd-address" > > Documentation/devicetree/bindings/net/ti,wilink-st.txt | 5 +++++ > 1 file changed, 5 insertions(+) > > diff --git a/Documentation/devicetree/bindings/net/ti,wilink-st.txt b/Documentation/devicetree/bindings/net/ti,wilink-st.txt > index 1649c1f..a45a508 100644 > --- a/Documentation/devicetree/bindings/net/ti,wilink-st.txt > +++ b/Documentation/devicetree/bindings/net/ti,wilink-st.txt > @@ -32,6 +32,9 @@ Optional properties: > See ../clocks/clock-bindings.txt for details. > - clock-names : Must include the following entry: > "ext_clock" (External clock provided to the TI combo chip). > + - nvmem-cells: phandle to nvmem data cell that contains a 6 byte BD address > + with the most significant byte first (big-endian). > + - nvmem-cell-names: "bd-address" (required when nvmem-cells is specified) > > Example: > > @@ -43,5 +46,7 @@ Example: > enable-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; > clocks = <&clk32k_wl18xx>; > clock-names = "ext_clock"; > + nvmem-cells = <&bd_address>; > + nvmem-cell-names = "bd-address”; For me this looks good, but I like to get an extra ACK from Rob on this. Regards Marcel -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Thu, Dec 07, 2017 at 08:57:39PM -0600, David Lechner wrote: > This adds optional nvmem consumer properties to the ti,wlink-st device tree > bindings to allow specifying the BD address. > > Signed-off-by: David Lechner <david@lechnology.com> > --- > > v2 changes: > * Renamed "mac-address" to "bd-address" > * Fixed typos in example > * Specify byte order of "bd-address" > > Documentation/devicetree/bindings/net/ti,wilink-st.txt | 5 +++++ > 1 file changed, 5 insertions(+) Reviewed-by: Rob Herring <robh@kernel.org> -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/net/ti,wilink-st.txt b/Documentation/devicetree/bindings/net/ti,wilink-st.txt index 1649c1f..a45a508 100644 --- a/Documentation/devicetree/bindings/net/ti,wilink-st.txt +++ b/Documentation/devicetree/bindings/net/ti,wilink-st.txt @@ -32,6 +32,9 @@ Optional properties: See ../clocks/clock-bindings.txt for details. - clock-names : Must include the following entry: "ext_clock" (External clock provided to the TI combo chip). + - nvmem-cells: phandle to nvmem data cell that contains a 6 byte BD address + with the most significant byte first (big-endian). + - nvmem-cell-names: "bd-address" (required when nvmem-cells is specified) Example: @@ -43,5 +46,7 @@ Example: enable-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; clocks = <&clk32k_wl18xx>; clock-names = "ext_clock"; + nvmem-cells = <&bd_address>; + nvmem-cell-names = "bd-address"; }; };
This adds optional nvmem consumer properties to the ti,wlink-st device tree bindings to allow specifying the BD address. Signed-off-by: David Lechner <david@lechnology.com> --- v2 changes: * Renamed "mac-address" to "bd-address" * Fixed typos in example * Specify byte order of "bd-address" Documentation/devicetree/bindings/net/ti,wilink-st.txt | 5 +++++ 1 file changed, 5 insertions(+)