| Message ID | 1510113136-6788-2-git-send-email-david@lechnology.com |
|---|---|
| State | Changes Requested, archived |
| Headers | show |
| Series | DRM driver for ILI9225 display panels | expand |
On Tue, Nov 07, 2017 at 09:52:15PM -0600, David Lechner wrote: > This adds a new binding for display panels that use an Ilitek ILI9225 > controller. > > The "generic,2.2in-176x220-ili9225-tft" device listed has no identification > markings whatsoever and an hour of googling turned up nothing, hence the use > of "generic". Just use ilitek then. I would do "ilitek,ili9225-2.2in-176x220" and hopefully there aren't others that size. I'm guessing you would have found them if so. Otherwise, looks fine. > An example of this nameless device can be found at: > https://github.com/Nkawu/TFT_22_ILI9225 > > Signed-off-by: David Lechner <david@lechnology.com> > --- > .../devicetree/bindings/display/ilitek,ili9225.txt | 25 ++++++++++++++++++++++ > 1 file changed, 25 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/ilitek,ili9225.txt -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/display/ilitek,ili9225.txt b/Documentation/devicetree/bindings/display/ilitek,ili9225.txt new file mode 100644 index 0000000..5839f56 --- /dev/null +++ b/Documentation/devicetree/bindings/display/ilitek,ili9225.txt @@ -0,0 +1,25 @@ +Ilitek ILI9225 display panels + +This binding is for display panels using an Ilitek ILI9225 controller in SPI +mode. + +Required properties: +- compatible: "generic,2.2in-176x220-ili9225-tft" +- rs-gpios: Register select signal +- reset-gpios: Reset pin + +The node for this driver must be a child node of a SPI controller, hence +all mandatory properties described in ../spi/spi-bus.txt must be specified. + +Optional properties: +- rotation: panel rotation in degrees counter clockwise (0,90,180,270) + +Example: + display@0{ + compatible = "generic,2.2in-176x220-ili9225-tft"; + reg = <0>; + spi-max-frequency = <12000000>; + rs-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>; + rotation = <270>; + };
This adds a new binding for display panels that use an Ilitek ILI9225 controller. The "generic,2.2in-176x220-ili9225-tft" device listed has no identification markings whatsoever and an hour of googling turned up nothing, hence the use of "generic". An example of this nameless device can be found at: https://github.com/Nkawu/TFT_22_ILI9225 Signed-off-by: David Lechner <david@lechnology.com> --- .../devicetree/bindings/display/ilitek,ili9225.txt | 25 ++++++++++++++++++++++ 1 file changed, 25 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/ilitek,ili9225.txt