new file mode 100644
@@ -0,0 +1,36 @@
+TCPCI(Typec port cotroller interface) binding
+---------------------------------------------
+
+Required properties:
+- compatible: should be "usb,tcpci".
+- reg: the i2c slave address of typec port controller device.
+- interrupt-parent: the phandle to the interrupt controller which provides
+ the interrupt.
+- interrupts: interrupt specification for tcpci alert.
+- port-type: typec port type.
+- default-role: preferred power role if port type is "dual".
+
+Required properties only for power source or drp:
+- src-pdos
+
+Required properties only for power sink or drp:
+- snk-pdos
+- max-snk-mv
+- max-snk-ma
+- op-snk-mw
+
+Example:
+
+ptn5110@50 {
+ compatible = "usb,tcpci";
+ reg = <0x50>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+ port-type = "dual";
+ default-role = "sink";
+ src-pdos = <0x380190c8>;
+ snk-pdos = <0x380190c8 0x3802d0c8>;
+ max-snk-mv = <9000>;
+ max-snk-ma = <1000>;
+ op-snk-mw = <9000>;
+};
TCPCI stands for typec port controller interface, its implementation has full typec port control with power delivery support, it's a standard i2c slave with GPIO input as irq interface, detail see spec "Universal Serial Bus Type-C Port Controller Interface Specification Revision 1.0, Version 1.1" Signed-off-by: Li Jun <jun.li@nxp.com> --- .../devicetree/bindings/usb/typec-tcpci.txt | 36 ++++++++++++++++++++++ 1 file changed, 36 insertions(+)