@@ -6,6 +6,7 @@ controllers on Qualcomm chipsets, such as, PCIe, UFS, and USB.
Required properties:
- compatible: compatible list, contains:
+ "qcom,ipq8074-qmp-pcie-phy" for PCIe phy on IPQ8074
"qcom,msm8996-qmp-pcie-phy" for 14nm PCIe phy on msm8996,
"qcom,msm8996-qmp-usb3-phy" for 14nm USB3 phy on msm8996.
@@ -38,6 +39,8 @@ Required properties:
"phy", "common", "cfg".
For "qcom,msm8996-qmp-usb3-phy" must contain
"phy", "common".
+ For "qcom,ipq8074-qmp-pcie-phy" must contain:
+ "phy", "phy_phy".
- vdda-phy-supply: Phandle to a regulator supply to PHY core block.
- vdda-pll-supply: Phandle to 1.8V regulator supply to PHY refclk pll block.
@@ -63,6 +66,11 @@ Required properties for child node:
- clock-output-names: Name of the phy clock that will be the parent for
the above pipe clock.
+ For "qcom,ipq8074-qmp-pcie-phy":
+ - "pcie20_phy0_pipe_clk" Pipe Clock parent
+ (or)
+ "pcie20_phy1_pipe_clk"
+
- resets: a list of phandles and reset controller specifier pairs,
one for each entry in reset-names.
- reset-names: Must contain following for pcie qmp phys:
IPQ8074 uses QMP phy controller that provides support to PCIe and USB. Adding dt binding information for the same. Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org> --- Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt | 8 ++++++++ 1 file changed, 8 insertions(+)