@@ -1,8 +1,7 @@
Device tree configuration for Renesas IIC (sh_mobile) driver
Required properties:
-- compatible : "renesas,iic-<soctype>". "renesas,rmobile-iic" as fallback
- Examples with soctypes are:
+- compatible :
- "renesas,iic-r8a73a4" (R-Mobile APE6)
- "renesas,iic-r8a7740" (R-Mobile A1)
- "renesas,iic-r8a7790" (R-Car H2)
@@ -12,6 +11,17 @@ Required properties:
- "renesas,iic-r8a7794" (R-Car E2)
- "renesas,iic-r8a7795" (R-Car H3)
- "renesas,iic-sh73a0" (SH-Mobile AG5)
+ - "renesas,rcar-gen2-iic" (generic R-Car Gen2 compatible device)
+ - "renesas,rcar-gen3-iic" (generic R-Car Gen3 compatible device)
+ - "renesas,rmobile-iic" (generic device)
+
+ When compatible with a generic R-Car version, nodes
+ must list the SoC-specific version corresponding to
+ the platform first followed by the generic R-Car
+ version.
+
+ renesas,rmobile-iic must always follow.
+
- reg : address start and address range size of device
- interrupts : interrupt of device
- clocks : clock for device
@@ -31,7 +41,8 @@ Pinctrl properties might be needed, too. See there.
Example:
iic0: i2c@e6500000 {
- compatible = "renesas,iic-r8a7790", "renesas,rmobile-iic";
+ compatible = "renesas,iic-r8a7790", "renesas,rcar-gen2-iic",
+ "renesas,rmobile-iic";
reg = <0 0xe6500000 0 0x425>;
interrupts = <0 174 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7790_CLK_IIC0>;
@@ -834,7 +834,9 @@ static const struct of_device_id sh_mobile_i2c_dt_ids[] = {
{ .compatible = "renesas,iic-r8a7792", .data = &fast_clock_dt_config },
{ .compatible = "renesas,iic-r8a7793", .data = &fast_clock_dt_config },
{ .compatible = "renesas,iic-r8a7794", .data = &fast_clock_dt_config },
+ { .compatible = "renesas,rcar-gen2-iic", .data = &fast_clock_dt_config },
{ .compatible = "renesas,iic-r8a7795", .data = &fast_clock_dt_config },
+ { .compatible = "renesas,rcar-gen3-iic", .data = &fast_clock_dt_config },
{ .compatible = "renesas,iic-sh73a0", .data = &fast_clock_dt_config },
{ .compatible = "renesas,rmobile-iic", .data = &default_dt_config },
{},
Add per-Generation fallback bindings for R-Car SoCs. This is in keeping with the compatibility string scheme is being adopted for drivers for Renesas SoCs. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> --- Documentation/devicetree/bindings/i2c/i2c-sh_mobile.txt | 17 ++++++++++++++--- drivers/i2c/busses/i2c-sh_mobile.c | 2 ++ 2 files changed, 16 insertions(+), 3 deletions(-)