[02/19] phy: stih41x-usb: Remove usb phy driver and dt binding documentation.

Message ID	1473859677-9231-3-git-send-email-peter.griffin@linaro.org
State	Not Applicable, archived
Headers	show Return-Path: <devicetree-owner@vger.kernel.org> From: Peter Griffin <peter.griffin@linaro.org> To: linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, kernel@stlinux.com, patrice.chotard@st.com, devicetree@vger.kernel.org Cc: peter.griffin@linaro.org, lee.jones@linaro.org, <kishon@ti.com> Subject: [PATCH 02/19] phy: stih41x-usb: Remove usb phy driver and dt binding documentation. Date: Wed, 14 Sep 2016 14:27:40 +0100 Message-Id: <1473859677-9231-3-git-send-email-peter.griffin@linaro.org> In-Reply-To: <1473859677-9231-1-git-send-email-peter.griffin@linaro.org> References: <1473859677-9231-1-git-send-email-peter.griffin@linaro.org> Sender: devicetree-owner@vger.kernel.org Precedence: bulk

Hi, On Wednesday 14 September 2016 06:57 PM, Peter Griffin wrote: > This phy is only used on STiH415/6 based silicon, and support for > these SoC's is being removed from the kernel. > > Signed-off-by: Peter Griffin <peter.griffin@linaro.org> > Cc: <kishon@ti.com> I've merged the 1st 2 patches of this series. Since Patrice has already mentioned that he's merged the MAINTAINERS patch, I'm not merging it. Please let me know if you know of any problems. Thanks Kishon > --- > .../devicetree/bindings/phy/phy-stih41x-usb.txt | 24 --- > drivers/phy/Kconfig | 8 - > drivers/phy/Makefile | 1 - > drivers/phy/phy-stih41x-usb.c | 188 --------------------- > 4 files changed, 221 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/phy/phy-stih41x-usb.txt > delete mode 100644 drivers/phy/phy-stih41x-usb.c > > diff --git a/Documentation/devicetree/bindings/phy/phy-stih41x-usb.txt b/Documentation/devicetree/bindings/phy/phy-stih41x-usb.txt > deleted file mode 100644 > index 744b480..0000000 > --- a/Documentation/devicetree/bindings/phy/phy-stih41x-usb.txt > +++ /dev/null > @@ -1,24 +0,0 @@ > -STMicroelectronics STiH41x USB PHY binding > ------------------------------------------- > - > -This file contains documentation for the usb phy found in STiH415/6 SoCs from > -STMicroelectronics. > - > -Required properties: > -- compatible : should be "st,stih416-usb-phy" or "st,stih415-usb-phy" > -- st,syscfg : should be a phandle of the syscfg node > -- clock-names : must contain "osc_phy" > -- clocks : must contain an entry for each name in clock-names. > -See: Documentation/devicetree/bindings/clock/clock-bindings.txt > -- #phy-cells : must be 0 for this phy > -See: Documentation/devicetree/bindings/phy/phy-bindings.txt > - > -Example: > - > -usb2_phy: usb2phy@0 { > - compatible = "st,stih416-usb-phy"; > - #phy-cells = <0>; > - st,syscfg = <&syscfg_rear>; > - clocks = <&clk_sysin>; > - clock-names = "osc_phy"; > -}; > diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig > index d1f22ac..b4aa039 100644 > --- a/drivers/phy/Kconfig > +++ b/drivers/phy/Kconfig > @@ -392,14 +392,6 @@ config PHY_STIH407_USB > Enable this support to enable the picoPHY device used by USB2 > and USB3 controllers on STMicroelectronics STiH407 SoC families. > > -config PHY_STIH41X_USB > - tristate "STMicroelectronics USB2 PHY driver for STiH41x series" > - depends on ARCH_STI > - select GENERIC_PHY > - help > - Enable this to support the USB transceiver that is part of > - STMicroelectronics STiH41x SoC series. > - > config PHY_QCOM_UFS > tristate "Qualcomm UFS PHY driver" > depends on OF && ARCH_QCOM > diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile > index d169d80..5e48741 100644 > --- a/drivers/phy/Makefile > +++ b/drivers/phy/Makefile > @@ -45,7 +45,6 @@ obj-$(CONFIG_PHY_ST_SPEAR1310_MIPHY) += phy-spear1310-miphy.o > obj-$(CONFIG_PHY_ST_SPEAR1340_MIPHY) += phy-spear1340-miphy.o > obj-$(CONFIG_PHY_XGENE) += phy-xgene.o > obj-$(CONFIG_PHY_STIH407_USB) += phy-stih407-usb.o > -obj-$(CONFIG_PHY_STIH41X_USB) += phy-stih41x-usb.o > obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs.o > obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs-qmp-20nm.o > obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs-qmp-14nm.o > diff --git a/drivers/phy/phy-stih41x-usb.c b/drivers/phy/phy-stih41x-usb.c > deleted file mode 100644 > index 0ac7463..0000000 > --- a/drivers/phy/phy-stih41x-usb.c > +++ /dev/null > @@ -1,188 +0,0 @@ > -/* > - * Copyright (C) 2014 STMicroelectronics > - * > - * STMicroelectronics PHY driver for STiH41x USB. > - * > - * Author: Maxime Coquelin <maxime.coquelin@st.com> > - * > - * This program is free software; you can redistribute it and/or modify > - * it under the terms of the GNU General Public License version 2, as > - * published by the Free Software Foundation. > - * > - */ > - > -#include <linux/platform_device.h> > -#include <linux/io.h> > -#include <linux/kernel.h> > -#include <linux/module.h> > -#include <linux/of.h> > -#include <linux/of_platform.h> > -#include <linux/clk.h> > -#include <linux/phy/phy.h> > -#include <linux/regmap.h> > -#include <linux/mfd/syscon.h> > - > -#define SYSCFG332 0x80 > -#define SYSCFG2520 0x820 > - > -/** > - * struct stih41x_usb_cfg - SoC specific PHY register mapping > - * @syscfg: Offset in syscfg registers bank > - * @cfg_mask: Bits mask for PHY configuration > - * @cfg: Static configuration value for PHY > - * @oscok: Notify the PHY oscillator clock is ready > - * Setting this bit enable the PHY > - */ > -struct stih41x_usb_cfg { > - u32 syscfg; > - u32 cfg_mask; > - u32 cfg; > - u32 oscok; > -}; > - > -/** > - * struct stih41x_usb_phy - Private data for the PHY > - * @dev: device for this controller > - * @regmap: Syscfg registers bank in which PHY is configured > - * @cfg: SoC specific PHY register mapping > - * @clk: Oscillator used by the PHY > - */ > -struct stih41x_usb_phy { > - struct device *dev; > - struct regmap *regmap; > - const struct stih41x_usb_cfg *cfg; > - struct clk *clk; > -}; > - > -static struct stih41x_usb_cfg stih415_usb_phy_cfg = { > - .syscfg = SYSCFG332, > - .cfg_mask = 0x3f, > - .cfg = 0x38, > - .oscok = BIT(6), > -}; > - > -static struct stih41x_usb_cfg stih416_usb_phy_cfg = { > - .syscfg = SYSCFG2520, > - .cfg_mask = 0x33f, > - .cfg = 0x238, > - .oscok = BIT(6), > -}; > - > -static int stih41x_usb_phy_init(struct phy *phy) > -{ > - struct stih41x_usb_phy *phy_dev = phy_get_drvdata(phy); > - > - return regmap_update_bits(phy_dev->regmap, phy_dev->cfg->syscfg, > - phy_dev->cfg->cfg_mask, phy_dev->cfg->cfg); > -} > - > -static int stih41x_usb_phy_power_on(struct phy *phy) > -{ > - struct stih41x_usb_phy *phy_dev = phy_get_drvdata(phy); > - int ret; > - > - ret = clk_prepare_enable(phy_dev->clk); > - if (ret) { > - dev_err(phy_dev->dev, "Failed to enable osc_phy clock\n"); > - return ret; > - } > - > - ret = regmap_update_bits(phy_dev->regmap, phy_dev->cfg->syscfg, > - phy_dev->cfg->oscok, phy_dev->cfg->oscok); > - if (ret) > - clk_disable_unprepare(phy_dev->clk); > - > - return ret; > -} > - > -static int stih41x_usb_phy_power_off(struct phy *phy) > -{ > - struct stih41x_usb_phy *phy_dev = phy_get_drvdata(phy); > - int ret; > - > - ret = regmap_update_bits(phy_dev->regmap, phy_dev->cfg->syscfg, > - phy_dev->cfg->oscok, 0); > - if (ret) { > - dev_err(phy_dev->dev, "Failed to clear oscok bit\n"); > - return ret; > - } > - > - clk_disable_unprepare(phy_dev->clk); > - > - return 0; > -} > - > -static const struct phy_ops stih41x_usb_phy_ops = { > - .init = stih41x_usb_phy_init, > - .power_on = stih41x_usb_phy_power_on, > - .power_off = stih41x_usb_phy_power_off, > - .owner = THIS_MODULE, > -}; > - > -static const struct of_device_id stih41x_usb_phy_of_match[]; > - > -static int stih41x_usb_phy_probe(struct platform_device *pdev) > -{ > - struct device_node *np = pdev->dev.of_node; > - const struct of_device_id *match; > - struct stih41x_usb_phy *phy_dev; > - struct device *dev = &pdev->dev; > - struct phy_provider *phy_provider; > - struct phy *phy; > - > - phy_dev = devm_kzalloc(dev, sizeof(*phy_dev), GFP_KERNEL); > - if (!phy_dev) > - return -ENOMEM; > - > - match = of_match_device(stih41x_usb_phy_of_match, &pdev->dev); > - if (!match) > - return -ENODEV; > - > - phy_dev->cfg = match->data; > - > - phy_dev->regmap = syscon_regmap_lookup_by_phandle(np, "st,syscfg"); > - if (IS_ERR(phy_dev->regmap)) { > - dev_err(dev, "No syscfg phandle specified\n"); > - return PTR_ERR(phy_dev->regmap); > - } > - > - phy_dev->clk = devm_clk_get(dev, "osc_phy"); > - if (IS_ERR(phy_dev->clk)) { > - dev_err(dev, "osc_phy clk not found\n"); > - return PTR_ERR(phy_dev->clk); > - } > - > - phy = devm_phy_create(dev, NULL, &stih41x_usb_phy_ops); > - > - if (IS_ERR(phy)) { > - dev_err(dev, "failed to create phy\n"); > - return PTR_ERR(phy); > - } > - > - phy_dev->dev = dev; > - > - phy_set_drvdata(phy, phy_dev); > - > - phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); > - return PTR_ERR_OR_ZERO(phy_provider); > -} > - > -static const struct of_device_id stih41x_usb_phy_of_match[] = { > - { .compatible = "st,stih415-usb-phy", .data = &stih415_usb_phy_cfg }, > - { .compatible = "st,stih416-usb-phy", .data = &stih416_usb_phy_cfg }, > - { /* sentinel */ }, > -}; > -MODULE_DEVICE_TABLE(of, stih41x_usb_phy_of_match); > - > -static struct platform_driver stih41x_usb_phy_driver = { > - .probe = stih41x_usb_phy_probe, > - .driver = { > - .name = "stih41x-usb-phy", > - .of_match_table = stih41x_usb_phy_of_match, > - } > -}; > -module_platform_driver(stih41x_usb_phy_driver); > - > -MODULE_AUTHOR("Maxime Coquelin <maxime.coquelin@st.com>"); > -MODULE_DESCRIPTION("STMicroelectronics USB PHY driver for STiH41x series"); > -MODULE_LICENSE("GPL v2"); > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html

diff --git a/Documentation/devicetree/bindings/phy/phy-stih41x-usb.txt b/Documentation/devicetree/bindings/phy/phy-stih41x-usb.txt deleted file mode 100644 index 744b480..0000000 --- a/Documentation/devicetree/bindings/phy/phy-stih41x-usb.txt +++ /dev/null @@ -1,24 +0,0 @@ -STMicroelectronics STiH41x USB PHY binding ------------------------------------------- - -This file contains documentation for the usb phy found in STiH415/6 SoCs from -STMicroelectronics. - -Required properties: -- compatible : should be "st,stih416-usb-phy" or "st,stih415-usb-phy" -- st,syscfg : should be a phandle of the syscfg node -- clock-names : must contain "osc_phy" -- clocks : must contain an entry for each name in clock-names. -See: Documentation/devicetree/bindings/clock/clock-bindings.txt -- #phy-cells : must be 0 for this phy -See: Documentation/devicetree/bindings/phy/phy-bindings.txt - -Example: - -usb2_phy: usb2phy@0 { - compatible = "st,stih416-usb-phy"; - #phy-cells = <0>; - st,syscfg = <&syscfg_rear>; - clocks = <&clk_sysin>; - clock-names = "osc_phy"; -}; diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index d1f22ac..b4aa039 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -392,14 +392,6 @@ config PHY_STIH407_USB Enable this support to enable the picoPHY device used by USB2 and USB3 controllers on STMicroelectronics STiH407 SoC families. -config PHY_STIH41X_USB - tristate "STMicroelectronics USB2 PHY driver for STiH41x series" - depends on ARCH_STI - select GENERIC_PHY - help - Enable this to support the USB transceiver that is part of - STMicroelectronics STiH41x SoC series. - config PHY_QCOM_UFS tristate "Qualcomm UFS PHY driver" depends on OF && ARCH_QCOM diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile index d169d80..5e48741 100644 --- a/drivers/phy/Makefile +++ b/drivers/phy/Makefile @@ -45,7 +45,6 @@ obj-$(CONFIG_PHY_ST_SPEAR1310_MIPHY) += phy-spear1310-miphy.o obj-$(CONFIG_PHY_ST_SPEAR1340_MIPHY) += phy-spear1340-miphy.o obj-$(CONFIG_PHY_XGENE) += phy-xgene.o obj-$(CONFIG_PHY_STIH407_USB) += phy-stih407-usb.o -obj-$(CONFIG_PHY_STIH41X_USB) += phy-stih41x-usb.o obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs.o obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs-qmp-20nm.o obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs-qmp-14nm.o diff --git a/drivers/phy/phy-stih41x-usb.c b/drivers/phy/phy-stih41x-usb.c deleted file mode 100644 index 0ac7463..0000000 --- a/drivers/phy/phy-stih41x-usb.c +++ /dev/null @@ -1,188 +0,0 @@ -/* - * Copyright (C) 2014 STMicroelectronics - * - * STMicroelectronics PHY driver for STiH41x USB. - * - * Author: Maxime Coquelin <maxime.coquelin@st.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2, as - * published by the Free Software Foundation. - * - */ - -#include <linux/platform_device.h> -#include <linux/io.h> -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/of.h> -#include <linux/of_platform.h> -#include <linux/clk.h> -#include <linux/phy/phy.h> -#include <linux/regmap.h> -#include <linux/mfd/syscon.h> - -#define SYSCFG332 0x80 -#define SYSCFG2520 0x820 - -/** - * struct stih41x_usb_cfg - SoC specific PHY register mapping - * @syscfg: Offset in syscfg registers bank - * @cfg_mask: Bits mask for PHY configuration - * @cfg: Static configuration value for PHY - * @oscok: Notify the PHY oscillator clock is ready - * Setting this bit enable the PHY - */ -struct stih41x_usb_cfg { - u32 syscfg; - u32 cfg_mask; - u32 cfg; - u32 oscok; -}; - -/** - * struct stih41x_usb_phy - Private data for the PHY - * @dev: device for this controller - * @regmap: Syscfg registers bank in which PHY is configured - * @cfg: SoC specific PHY register mapping - * @clk: Oscillator used by the PHY - */ -struct stih41x_usb_phy { - struct device *dev; - struct regmap *regmap; - const struct stih41x_usb_cfg *cfg; - struct clk *clk; -}; - -static struct stih41x_usb_cfg stih415_usb_phy_cfg = { - .syscfg = SYSCFG332, - .cfg_mask = 0x3f, - .cfg = 0x38, - .oscok = BIT(6), -}; - -static struct stih41x_usb_cfg stih416_usb_phy_cfg = { - .syscfg = SYSCFG2520, - .cfg_mask = 0x33f, - .cfg = 0x238, - .oscok = BIT(6), -}; - -static int stih41x_usb_phy_init(struct phy *phy) -{ - struct stih41x_usb_phy *phy_dev = phy_get_drvdata(phy); - - return regmap_update_bits(phy_dev->regmap, phy_dev->cfg->syscfg, - phy_dev->cfg->cfg_mask, phy_dev->cfg->cfg); -} - -static int stih41x_usb_phy_power_on(struct phy *phy) -{ - struct stih41x_usb_phy *phy_dev = phy_get_drvdata(phy); - int ret; - - ret = clk_prepare_enable(phy_dev->clk); - if (ret) { - dev_err(phy_dev->dev, "Failed to enable osc_phy clock\n"); - return ret; - } - - ret = regmap_update_bits(phy_dev->regmap, phy_dev->cfg->syscfg, - phy_dev->cfg->oscok, phy_dev->cfg->oscok); - if (ret) - clk_disable_unprepare(phy_dev->clk); - - return ret; -} - -static int stih41x_usb_phy_power_off(struct phy *phy) -{ - struct stih41x_usb_phy *phy_dev = phy_get_drvdata(phy); - int ret; - - ret = regmap_update_bits(phy_dev->regmap, phy_dev->cfg->syscfg, - phy_dev->cfg->oscok, 0); - if (ret) { - dev_err(phy_dev->dev, "Failed to clear oscok bit\n"); - return ret; - } - - clk_disable_unprepare(phy_dev->clk); - - return 0; -} - -static const struct phy_ops stih41x_usb_phy_ops = { - .init = stih41x_usb_phy_init, - .power_on = stih41x_usb_phy_power_on, - .power_off = stih41x_usb_phy_power_off, - .owner = THIS_MODULE, -}; - -static const struct of_device_id stih41x_usb_phy_of_match[]; - -static int stih41x_usb_phy_probe(struct platform_device *pdev) -{ - struct device_node *np = pdev->dev.of_node; - const struct of_device_id *match; - struct stih41x_usb_phy *phy_dev; - struct device *dev = &pdev->dev; - struct phy_provider *phy_provider; - struct phy *phy; - - phy_dev = devm_kzalloc(dev, sizeof(*phy_dev), GFP_KERNEL); - if (!phy_dev) - return -ENOMEM; - - match = of_match_device(stih41x_usb_phy_of_match, &pdev->dev); - if (!match) - return -ENODEV; - - phy_dev->cfg = match->data; - - phy_dev->regmap = syscon_regmap_lookup_by_phandle(np, "st,syscfg"); - if (IS_ERR(phy_dev->regmap)) { - dev_err(dev, "No syscfg phandle specified\n"); - return PTR_ERR(phy_dev->regmap); - } - - phy_dev->clk = devm_clk_get(dev, "osc_phy"); - if (IS_ERR(phy_dev->clk)) { - dev_err(dev, "osc_phy clk not found\n"); - return PTR_ERR(phy_dev->clk); - } - - phy = devm_phy_create(dev, NULL, &stih41x_usb_phy_ops); - - if (IS_ERR(phy)) { - dev_err(dev, "failed to create phy\n"); - return PTR_ERR(phy); - } - - phy_dev->dev = dev; - - phy_set_drvdata(phy, phy_dev); - - phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); - return PTR_ERR_OR_ZERO(phy_provider); -} - -static const struct of_device_id stih41x_usb_phy_of_match[] = { - { .compatible = "st,stih415-usb-phy", .data = &stih415_usb_phy_cfg }, - { .compatible = "st,stih416-usb-phy", .data = &stih416_usb_phy_cfg }, - { /* sentinel */ }, -}; -MODULE_DEVICE_TABLE(of, stih41x_usb_phy_of_match); - -static struct platform_driver stih41x_usb_phy_driver = { - .probe = stih41x_usb_phy_probe, - .driver = { - .name = "stih41x-usb-phy", - .of_match_table = stih41x_usb_phy_of_match, - } -}; -module_platform_driver(stih41x_usb_phy_driver); - -MODULE_AUTHOR("Maxime Coquelin <maxime.coquelin@st.com>"); -MODULE_DESCRIPTION("STMicroelectronics USB PHY driver for STiH41x series"); -MODULE_LICENSE("GPL v2");

[02/19] phy: stih41x-usb: Remove usb phy driver and dt binding documentation.

Commit Message

Comments

Patch