Message ID | 1459912250-50878-2-git-send-email-preid@electromag.com.au |
---|---|
State | Changes Requested, archived |
Headers | show |
Hi Phil, Thanks for the patch. Please find my comments below. On 04/06/2016 05:10 AM, Phil Reid wrote: > This patch adds basic device tree support for the pca9532 LEDs. > > Signed-off-by: Phil Reid <preid@electromag.com.au> > --- > .../devicetree/bindings/leds/leds-pca9532.txt | 32 +++++++++++ > drivers/leds/leds-pca9532.c | 63 ++++++++++++++++++++-- > include/dt-bindings/leds/leds-pca9532.h | 18 +++++++ > include/linux/leds-pca9532.h | 8 ++- > 4 files changed, 112 insertions(+), 9 deletions(-) > create mode 100644 Documentation/devicetree/bindings/leds/leds-pca9532.txt > create mode 100644 include/dt-bindings/leds/leds-pca9532.h > > diff --git a/Documentation/devicetree/bindings/leds/leds-pca9532.txt b/Documentation/devicetree/bindings/leds/leds-pca9532.txt > new file mode 100644 > index 0000000..b48c223 > --- /dev/null > +++ b/Documentation/devicetree/bindings/leds/leds-pca9532.txt > @@ -0,0 +1,32 @@ > +*NXP - pca9532 PWM LED Driver > + > +The PCA9532 family is SMBus I/O expander optimized for dimming LEDs. > +The PWM support 256 steps. > + > +Required properties: > + - compatible: > + "nxp,pca9530" > + "nxp,pca9531" > + "nxp,pca9532" > + "nxp,pca9533" > + - reg - I2C slave address > + > +Each led is represented as a sub-node of the nxp,pca9530. > + > +LED sub-node properties: > +- type: Output configuration > + 0 = NONE, 1 = LED, 2 = N2100_BEEP, 3 = GPIO > + > +Example: > + > + ledBL: pca9530@60 { I think that ledBL label is here by mistake. It looks like this label's purpose was to describe LED color (BL -> blue), but this info should be conveyed by child node name, per which LED class devices are created. > + compatible = "nxp,pca9530"; > + reg = <0x60>; > + > + led0 { i.e. here. Moreover there is established LED device naming convention (see Documentation/leds/leds-class.txt): devicename:colour:function > + type = <PCA9532_TYPE_LED>; Please add "#include <dt-bindings/leds/leds-pca9532.h>" after "Example:" above. > + }; > + }; > + > +For more product information please see the link below: > +http://nxp.com/documents/data_sheet/PCA9532.pdf > diff --git a/drivers/leds/leds-pca9532.c b/drivers/leds/leds-pca9532.c > index e3d3b1a..8694c83 100644 > --- a/drivers/leds/leds-pca9532.c > +++ b/drivers/leds/leds-pca9532.c > @@ -21,6 +21,8 @@ > #include <linux/workqueue.h> > #include <linux/leds-pca9532.h> > #include <linux/gpio.h> > +#include <linux/of.h> > +#include <linux/of_device.h> > > /* m = num_leds*/ > #define PCA9532_REG_INPUT(i) ((i) >> 3) > @@ -86,9 +88,22 @@ static const struct pca9532_chip_info pca9532_chip_info_tbl[] = { > }, > }; > > +#ifdef CONFIG_OF > +static const struct of_device_id of_pca9532_leds_match[] = { > + { .compatible = "nxp,pca9530", .data = (void *)pca9530 }, > + { .compatible = "nxp,pca9531", .data = (void *)pca9531 }, > + { .compatible = "nxp,pca9532", .data = (void *)pca9532 }, > + { .compatible = "nxp,pca9533", .data = (void *)pca9533 }, > + {}, > +}; > + > +MODULE_DEVICE_TABLE(of, of_pca9532_leds_match); > +#endif > + > static struct i2c_driver pca9532_driver = { > .driver = { > .name = "leds-pca953x", > + .of_match_table = of_match_ptr(of_pca9532_leds_match), > }, > .probe = pca9532_probe, > .remove = pca9532_remove, > @@ -432,15 +447,55 @@ exit: > return err; > } > > +struct pca9532_platform_data *pca9532_of_populate_pdata(struct device *dev, > + struct device_node *np) > +{ > + struct pca9532_platform_data *pdata; > + struct device_node *child; > + int devid = (int)of_match_device(of_pca9532_leds_match, dev)->data; > + int maxleds = pca9532_chip_info_tbl[devid].num_leds; > + int i = 0; > + > + pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); > + if (!pdata) > + return ERR_PTR(-ENOMEM); > + > + for_each_child_of_node(np, child) { > + of_property_read_string(child, "name", &pdata->leds[i].name); Please use "label" property (see Documentation/devicetree/binding /leds/common.txt). If not present use child node name. You can refer to other LED class devices. > + of_property_read_u32(child, "type", &pdata->leds[i].type); > + if (!pdata->leds[i].name) > + pdata->leds[i].name = "?"; > + if (i >= maxleds) > + break; You have to call of_node_put if breaking this loop. > + } > + > + return pdata; > +} > + > static int pca9532_probe(struct i2c_client *client, > const struct i2c_device_id *id) > { > + int devid; > struct pca9532_data *data = i2c_get_clientdata(client); > struct pca9532_platform_data *pca9532_pdata = > dev_get_platdata(&client->dev); > - > - if (!pca9532_pdata) > - return -EIO; > + struct device_node *np = client->dev.of_node; > + > + if (!pca9532_pdata) { > + if (np) { > + pca9532_pdata = > + pca9532_of_populate_pdata(&client->dev, np); > + if (IS_ERR(pca9532_pdata)) > + return PTR_ERR(pca9532_pdata); > + } else { > + dev_err(&client->dev, "no platform data\n"); > + return -EINVAL; > + } > + devid = (int)of_match_device( > + of_pca9532_leds_match, &client->dev)->data; > + } else { > + devid = id->driver_data; > + } > > if (!i2c_check_functionality(client->adapter, > I2C_FUNC_SMBUS_BYTE_DATA)) > @@ -450,7 +505,7 @@ static int pca9532_probe(struct i2c_client *client, > if (!data) > return -ENOMEM; > > - data->chip_info = &pca9532_chip_info_tbl[id->driver_data]; > + data->chip_info = &pca9532_chip_info_tbl[devid]; > > dev_info(&client->dev, "setting platform data\n"); > i2c_set_clientdata(client, data); > diff --git a/include/dt-bindings/leds/leds-pca9532.h b/include/dt-bindings/leds/leds-pca9532.h > new file mode 100644 > index 0000000..4d917aa > --- /dev/null > +++ b/include/dt-bindings/leds/leds-pca9532.h > @@ -0,0 +1,18 @@ > +/* > + * This header provides constants for pca9532 LED bindings. > + * > + * This file is licensed under the terms of the GNU General Public > + * License version 2. This program is licensed "as is" without any > + * warranty of any kind, whether express or implied. > + */ > + > +#ifndef _DT_BINDINGS_LEDS_PCA9532_H > +#define _DT_BINDINGS_LEDS_PCA9532_H > + > +#define PCA9532_TYPE_NONE 0 > +#define PCA9532_TYPE_LED 1 > +#define PCA9532_TYPE_N2100_BEEP 2 > +#define PCA9532_TYPE_GPIO 3 > +#define PCA9532_LED_TIMER2 4 > + > +#endif /* _DT_BINDINGS_LEDS_PCA9532_H */ > diff --git a/include/linux/leds-pca9532.h b/include/linux/leds-pca9532.h > index b8d6fff..4970f51 100644 > --- a/include/linux/leds-pca9532.h > +++ b/include/linux/leds-pca9532.h > @@ -16,6 +16,7 @@ > > #include <linux/leds.h> > #include <linux/workqueue.h> > +#include <dt-bindings/leds/leds-pca9532.h> > > enum pca9532_state { > PCA9532_OFF = 0x0, > @@ -24,16 +25,13 @@ enum pca9532_state { > PCA9532_PWM1 = 0x3 > }; > > -enum pca9532_type { PCA9532_TYPE_NONE, PCA9532_TYPE_LED, > - PCA9532_TYPE_N2100_BEEP, PCA9532_TYPE_GPIO }; > - > struct pca9532_led { > u8 id; > struct i2c_client *client; > - char *name; > + const char *name; > struct led_classdev ldev; > struct work_struct work; > - enum pca9532_type type; > + u32 type; > enum pca9532_state state; > }; > >
G'day Jacek, Thanks for the feedback. On 6/04/2016 3:56 PM, Jacek Anaszewski wrote: > Hi Phil, > > Thanks for the patch. Please find my comments below. > > On 04/06/2016 05:10 AM, Phil Reid wrote: >> This patch adds basic device tree support for the pca9532 LEDs. >> >> Signed-off-by: Phil Reid <preid@electromag.com.au> >> --- >> .../devicetree/bindings/leds/leds-pca9532.txt | 32 +++++++++++ >> drivers/leds/leds-pca9532.c | 63 ++++++++++++++++++++-- >> include/dt-bindings/leds/leds-pca9532.h | 18 +++++++ >> include/linux/leds-pca9532.h | 8 ++- >> 4 files changed, 112 insertions(+), 9 deletions(-) >> create mode 100644 Documentation/devicetree/bindings/leds/leds-pca9532.txt >> create mode 100644 include/dt-bindings/leds/leds-pca9532.h >> >> diff --git a/Documentation/devicetree/bindings/leds/leds-pca9532.txt b/Documentation/devicetree/bindings/leds/leds-pca9532.txt >> new file mode 100644 >> index 0000000..b48c223 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/leds/leds-pca9532.txt >> @@ -0,0 +1,32 @@ >> +*NXP - pca9532 PWM LED Driver >> + >> +The PCA9532 family is SMBus I/O expander optimized for dimming LEDs. >> +The PWM support 256 steps. >> + >> +Required properties: >> + - compatible: >> + "nxp,pca9530" >> + "nxp,pca9531" >> + "nxp,pca9532" >> + "nxp,pca9533" >> + - reg - I2C slave address >> + >> +Each led is represented as a sub-node of the nxp,pca9530. >> + >> +LED sub-node properties: >> +- type: Output configuration >> + 0 = NONE, 1 = LED, 2 = N2100_BEEP, 3 = GPIO >> + >> +Example: >> + >> + ledBL: pca9530@60 { > > I think that ledBL label is here by mistake. It looks like this > label's purpose was to describe LED color (BL -> blue), but > this info should be conveyed by child node name, per which > LED class devices are created. I'll clean this up. > >> + compatible = "nxp,pca9530"; >> + reg = <0x60>; >> + >> + led0 { > > i.e. here. Moreover there is established LED device naming > convention (see Documentation/leds/leds-class.txt): > > devicename:colour:function Ok. > > >> + type = <PCA9532_TYPE_LED>; > > Please add "#include <dt-bindings/leds/leds-pca9532.h>" after > "Example:" above. Ok. > >> + }; >> + }; >> + >> +For more product information please see the link below: >> +http://nxp.com/documents/data_sheet/PCA9532.pdf >> diff --git a/drivers/leds/leds-pca9532.c b/drivers/leds/leds-pca9532.c >> index e3d3b1a..8694c83 100644 >> --- a/drivers/leds/leds-pca9532.c >> +++ b/drivers/leds/leds-pca9532.c >> @@ -21,6 +21,8 @@ >> #include <linux/workqueue.h> >> #include <linux/leds-pca9532.h> >> #include <linux/gpio.h> >> +#include <linux/of.h> >> +#include <linux/of_device.h> >> >> /* m = num_leds*/ >> #define PCA9532_REG_INPUT(i) ((i) >> 3) >> @@ -86,9 +88,22 @@ static const struct pca9532_chip_info pca9532_chip_info_tbl[] = { >> }, >> }; >> >> +#ifdef CONFIG_OF >> +static const struct of_device_id of_pca9532_leds_match[] = { >> + { .compatible = "nxp,pca9530", .data = (void *)pca9530 }, >> + { .compatible = "nxp,pca9531", .data = (void *)pca9531 }, >> + { .compatible = "nxp,pca9532", .data = (void *)pca9532 }, >> + { .compatible = "nxp,pca9533", .data = (void *)pca9533 }, >> + {}, >> +}; >> + >> +MODULE_DEVICE_TABLE(of, of_pca9532_leds_match); >> +#endif >> + >> static struct i2c_driver pca9532_driver = { >> .driver = { >> .name = "leds-pca953x", >> + .of_match_table = of_match_ptr(of_pca9532_leds_match), >> }, >> .probe = pca9532_probe, >> .remove = pca9532_remove, >> @@ -432,15 +447,55 @@ exit: >> return err; >> } >> >> +struct pca9532_platform_data *pca9532_of_populate_pdata(struct device *dev, >> + struct device_node *np) >> +{ >> + struct pca9532_platform_data *pdata; >> + struct device_node *child; >> + int devid = (int)of_match_device(of_pca9532_leds_match, dev)->data; >> + int maxleds = pca9532_chip_info_tbl[devid].num_leds; >> + int i = 0; >> + >> + pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); >> + if (!pdata) >> + return ERR_PTR(-ENOMEM); >> + >> + for_each_child_of_node(np, child) { >> + of_property_read_string(child, "name", &pdata->leds[i].name); > > Please use "label" property (see Documentation/devicetree/binding > /leds/common.txt). If not present use child node name. You can refer > to other LED class devices. Ok. > >> + of_property_read_u32(child, "type", &pdata->leds[i].type); >> + if (!pdata->leds[i].name) >> + pdata->leds[i].name = "?"; >> + if (i >= maxleds) >> + break; > > You have to call of_node_put if breaking this loop. Ok. Also I forgot to increment i, my system only has one LED on the PCA9530. > >> + } >> + >> + return pdata; >> +} >> + >> static int pca9532_probe(struct i2c_client *client, >> const struct i2c_device_id *id) >> { >> + int devid; >> struct pca9532_data *data = i2c_get_clientdata(client); >> struct pca9532_platform_data *pca9532_pdata = >> dev_get_platdata(&client->dev); >> - >> - if (!pca9532_pdata) >> - return -EIO; >> + struct device_node *np = client->dev.of_node; >> + >> + if (!pca9532_pdata) { >> + if (np) { >> + pca9532_pdata = >> + pca9532_of_populate_pdata(&client->dev, np); >> + if (IS_ERR(pca9532_pdata)) >> + return PTR_ERR(pca9532_pdata); >> + } else { >> + dev_err(&client->dev, "no platform data\n"); >> + return -EINVAL; >> + } >> + devid = (int)of_match_device( >> + of_pca9532_leds_match, &client->dev)->data; >> + } else { >> + devid = id->driver_data; >> + } >> >> if (!i2c_check_functionality(client->adapter, >> I2C_FUNC_SMBUS_BYTE_DATA)) >> @@ -450,7 +505,7 @@ static int pca9532_probe(struct i2c_client *client, >> if (!data) >> return -ENOMEM; >> >> - data->chip_info = &pca9532_chip_info_tbl[id->driver_data]; >> + data->chip_info = &pca9532_chip_info_tbl[devid]; >> >> dev_info(&client->dev, "setting platform data\n"); >> i2c_set_clientdata(client, data); >> diff --git a/include/dt-bindings/leds/leds-pca9532.h b/include/dt-bindings/leds/leds-pca9532.h >> new file mode 100644 >> index 0000000..4d917aa >> --- /dev/null >> +++ b/include/dt-bindings/leds/leds-pca9532.h >> @@ -0,0 +1,18 @@ >> +/* >> + * This header provides constants for pca9532 LED bindings. >> + * >> + * This file is licensed under the terms of the GNU General Public >> + * License version 2. This program is licensed "as is" without any >> + * warranty of any kind, whether express or implied. >> + */ >> + >> +#ifndef _DT_BINDINGS_LEDS_PCA9532_H >> +#define _DT_BINDINGS_LEDS_PCA9532_H >> + >> +#define PCA9532_TYPE_NONE 0 >> +#define PCA9532_TYPE_LED 1 >> +#define PCA9532_TYPE_N2100_BEEP 2 >> +#define PCA9532_TYPE_GPIO 3 >> +#define PCA9532_LED_TIMER2 4 >> + >> +#endif /* _DT_BINDINGS_LEDS_PCA9532_H */ >> diff --git a/include/linux/leds-pca9532.h b/include/linux/leds-pca9532.h >> index b8d6fff..4970f51 100644 >> --- a/include/linux/leds-pca9532.h >> +++ b/include/linux/leds-pca9532.h >> @@ -16,6 +16,7 @@ >> >> #include <linux/leds.h> >> #include <linux/workqueue.h> >> +#include <dt-bindings/leds/leds-pca9532.h> >> >> enum pca9532_state { >> PCA9532_OFF = 0x0, >> @@ -24,16 +25,13 @@ enum pca9532_state { >> PCA9532_PWM1 = 0x3 >> }; >> >> -enum pca9532_type { PCA9532_TYPE_NONE, PCA9532_TYPE_LED, >> - PCA9532_TYPE_N2100_BEEP, PCA9532_TYPE_GPIO }; >> - >> struct pca9532_led { >> u8 id; >> struct i2c_client *client; >> - char *name; >> + const char *name; >> struct led_classdev ldev; >> struct work_struct work; >> - enum pca9532_type type; >> + u32 type; >> enum pca9532_state state; >> }; >> >> >
On Wed, Apr 06, 2016 at 11:10:50AM +0800, Phil Reid wrote: > This patch adds basic device tree support for the pca9532 LEDs. > > Signed-off-by: Phil Reid <preid@electromag.com.au> > --- > .../devicetree/bindings/leds/leds-pca9532.txt | 32 +++++++++++ > drivers/leds/leds-pca9532.c | 63 ++++++++++++++++++++-- > include/dt-bindings/leds/leds-pca9532.h | 18 +++++++ > include/linux/leds-pca9532.h | 8 ++- > 4 files changed, 112 insertions(+), 9 deletions(-) > create mode 100644 Documentation/devicetree/bindings/leds/leds-pca9532.txt > create mode 100644 include/dt-bindings/leds/leds-pca9532.h > > diff --git a/Documentation/devicetree/bindings/leds/leds-pca9532.txt b/Documentation/devicetree/bindings/leds/leds-pca9532.txt > new file mode 100644 > index 0000000..b48c223 > --- /dev/null > +++ b/Documentation/devicetree/bindings/leds/leds-pca9532.txt Would leds-pca953x.txt be more appropriate. > @@ -0,0 +1,32 @@ > +*NXP - pca9532 PWM LED Driver > + > +The PCA9532 family is SMBus I/O expander optimized for dimming LEDs. > +The PWM support 256 steps. supports > + > +Required properties: > + - compatible: > + "nxp,pca9530" > + "nxp,pca9531" > + "nxp,pca9532" > + "nxp,pca9533" > + - reg - I2C slave address > + > +Each led is represented as a sub-node of the nxp,pca9530. > + > +LED sub-node properties: What are sub-node names and how many? > +- type: Output configuration > + 0 = NONE, 1 = LED, 2 = N2100_BEEP, 3 = GPIO Add vendor prefix. > + > +Example: > + > + ledBL: pca9530@60 { > + compatible = "nxp,pca9530"; > + reg = <0x60>; > + > + led0 { > + type = <PCA9532_TYPE_LED>; > + }; > + }; > + > +For more product information please see the link below: > +http://nxp.com/documents/data_sheet/PCA9532.pdf Move this up to the top. -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 8/04/2016 1:57 AM, Rob Herring wrote: > On Wed, Apr 06, 2016 at 11:10:50AM +0800, Phil Reid wrote: >> This patch adds basic device tree support for the pca9532 LEDs. >> >> Signed-off-by: Phil Reid <preid@electromag.com.au> >> --- >> .../devicetree/bindings/leds/leds-pca9532.txt | 32 +++++++++++ >> drivers/leds/leds-pca9532.c | 63 ++++++++++++++++++++-- >> include/dt-bindings/leds/leds-pca9532.h | 18 +++++++ >> include/linux/leds-pca9532.h | 8 ++- >> 4 files changed, 112 insertions(+), 9 deletions(-) >> create mode 100644 Documentation/devicetree/bindings/leds/leds-pca9532.txt >> create mode 100644 include/dt-bindings/leds/leds-pca9532.h >> >> diff --git a/Documentation/devicetree/bindings/leds/leds-pca9532.txt b/Documentation/devicetree/bindings/leds/leds-pca9532.txt >> new file mode 100644 >> index 0000000..b48c223 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/leds/leds-pca9532.txt > > Would leds-pca953x.txt be more appropriate. I have no objection. I just followed the driver file name. Other disucssions seem to indicate the preference to move away from the 'x' in driver names and just use one of the devices for the name. Note that there is a gpio-pca953x driver. Which support pca9534-9539 plus other gpio devices. Those devices don't have the same functionality as this series. > >> @@ -0,0 +1,32 @@ >> +*NXP - pca9532 PWM LED Driver >> + >> +The PCA9532 family is SMBus I/O expander optimized for dimming LEDs. >> +The PWM support 256 steps. > > supports > >> + >> +Required properties: >> + - compatible: >> + "nxp,pca9530" >> + "nxp,pca9531" >> + "nxp,pca9532" >> + "nxp,pca9533" >> + - reg - I2C slave address >> + >> +Each led is represented as a sub-node of the nxp,pca9530. >> + >> +LED sub-node properties: > > What are sub-node names and how many? They don't seem to be important. It's a fallback for when label isn't defined. I just following leds-netxbig.txt > >> +- type: Output configuration >> + 0 = NONE, 1 = LED, 2 = N2100_BEEP, 3 = GPIO > > Add vendor prefix. Done. > >> + >> +Example: >> + >> + ledBL: pca9530@60 { >> + compatible = "nxp,pca9530"; >> + reg = <0x60>; >> + >> + led0 { >> + type = <PCA9532_TYPE_LED>; >> + }; >> + }; >> + >> +For more product information please see the link below: >> +http://nxp.com/documents/data_sheet/PCA9532.pdf > > Move this up to the top. Done, but note this doesn't follow the layout of other files in the folder.
diff --git a/Documentation/devicetree/bindings/leds/leds-pca9532.txt b/Documentation/devicetree/bindings/leds/leds-pca9532.txt new file mode 100644 index 0000000..b48c223 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/leds-pca9532.txt @@ -0,0 +1,32 @@ +*NXP - pca9532 PWM LED Driver + +The PCA9532 family is SMBus I/O expander optimized for dimming LEDs. +The PWM support 256 steps. + +Required properties: + - compatible: + "nxp,pca9530" + "nxp,pca9531" + "nxp,pca9532" + "nxp,pca9533" + - reg - I2C slave address + +Each led is represented as a sub-node of the nxp,pca9530. + +LED sub-node properties: +- type: Output configuration + 0 = NONE, 1 = LED, 2 = N2100_BEEP, 3 = GPIO + +Example: + + ledBL: pca9530@60 { + compatible = "nxp,pca9530"; + reg = <0x60>; + + led0 { + type = <PCA9532_TYPE_LED>; + }; + }; + +For more product information please see the link below: +http://nxp.com/documents/data_sheet/PCA9532.pdf diff --git a/drivers/leds/leds-pca9532.c b/drivers/leds/leds-pca9532.c index e3d3b1a..8694c83 100644 --- a/drivers/leds/leds-pca9532.c +++ b/drivers/leds/leds-pca9532.c @@ -21,6 +21,8 @@ #include <linux/workqueue.h> #include <linux/leds-pca9532.h> #include <linux/gpio.h> +#include <linux/of.h> +#include <linux/of_device.h> /* m = num_leds*/ #define PCA9532_REG_INPUT(i) ((i) >> 3) @@ -86,9 +88,22 @@ static const struct pca9532_chip_info pca9532_chip_info_tbl[] = { }, }; +#ifdef CONFIG_OF +static const struct of_device_id of_pca9532_leds_match[] = { + { .compatible = "nxp,pca9530", .data = (void *)pca9530 }, + { .compatible = "nxp,pca9531", .data = (void *)pca9531 }, + { .compatible = "nxp,pca9532", .data = (void *)pca9532 }, + { .compatible = "nxp,pca9533", .data = (void *)pca9533 }, + {}, +}; + +MODULE_DEVICE_TABLE(of, of_pca9532_leds_match); +#endif + static struct i2c_driver pca9532_driver = { .driver = { .name = "leds-pca953x", + .of_match_table = of_match_ptr(of_pca9532_leds_match), }, .probe = pca9532_probe, .remove = pca9532_remove, @@ -432,15 +447,55 @@ exit: return err; } +struct pca9532_platform_data *pca9532_of_populate_pdata(struct device *dev, + struct device_node *np) +{ + struct pca9532_platform_data *pdata; + struct device_node *child; + int devid = (int)of_match_device(of_pca9532_leds_match, dev)->data; + int maxleds = pca9532_chip_info_tbl[devid].num_leds; + int i = 0; + + pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) + return ERR_PTR(-ENOMEM); + + for_each_child_of_node(np, child) { + of_property_read_string(child, "name", &pdata->leds[i].name); + of_property_read_u32(child, "type", &pdata->leds[i].type); + if (!pdata->leds[i].name) + pdata->leds[i].name = "?"; + if (i >= maxleds) + break; + } + + return pdata; +} + static int pca9532_probe(struct i2c_client *client, const struct i2c_device_id *id) { + int devid; struct pca9532_data *data = i2c_get_clientdata(client); struct pca9532_platform_data *pca9532_pdata = dev_get_platdata(&client->dev); - - if (!pca9532_pdata) - return -EIO; + struct device_node *np = client->dev.of_node; + + if (!pca9532_pdata) { + if (np) { + pca9532_pdata = + pca9532_of_populate_pdata(&client->dev, np); + if (IS_ERR(pca9532_pdata)) + return PTR_ERR(pca9532_pdata); + } else { + dev_err(&client->dev, "no platform data\n"); + return -EINVAL; + } + devid = (int)of_match_device( + of_pca9532_leds_match, &client->dev)->data; + } else { + devid = id->driver_data; + } if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) @@ -450,7 +505,7 @@ static int pca9532_probe(struct i2c_client *client, if (!data) return -ENOMEM; - data->chip_info = &pca9532_chip_info_tbl[id->driver_data]; + data->chip_info = &pca9532_chip_info_tbl[devid]; dev_info(&client->dev, "setting platform data\n"); i2c_set_clientdata(client, data); diff --git a/include/dt-bindings/leds/leds-pca9532.h b/include/dt-bindings/leds/leds-pca9532.h new file mode 100644 index 0000000..4d917aa --- /dev/null +++ b/include/dt-bindings/leds/leds-pca9532.h @@ -0,0 +1,18 @@ +/* + * This header provides constants for pca9532 LED bindings. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef _DT_BINDINGS_LEDS_PCA9532_H +#define _DT_BINDINGS_LEDS_PCA9532_H + +#define PCA9532_TYPE_NONE 0 +#define PCA9532_TYPE_LED 1 +#define PCA9532_TYPE_N2100_BEEP 2 +#define PCA9532_TYPE_GPIO 3 +#define PCA9532_LED_TIMER2 4 + +#endif /* _DT_BINDINGS_LEDS_PCA9532_H */ diff --git a/include/linux/leds-pca9532.h b/include/linux/leds-pca9532.h index b8d6fff..4970f51 100644 --- a/include/linux/leds-pca9532.h +++ b/include/linux/leds-pca9532.h @@ -16,6 +16,7 @@ #include <linux/leds.h> #include <linux/workqueue.h> +#include <dt-bindings/leds/leds-pca9532.h> enum pca9532_state { PCA9532_OFF = 0x0, @@ -24,16 +25,13 @@ enum pca9532_state { PCA9532_PWM1 = 0x3 }; -enum pca9532_type { PCA9532_TYPE_NONE, PCA9532_TYPE_LED, - PCA9532_TYPE_N2100_BEEP, PCA9532_TYPE_GPIO }; - struct pca9532_led { u8 id; struct i2c_client *client; - char *name; + const char *name; struct led_classdev ldev; struct work_struct work; - enum pca9532_type type; + u32 type; enum pca9532_state state; };
This patch adds basic device tree support for the pca9532 LEDs. Signed-off-by: Phil Reid <preid@electromag.com.au> --- .../devicetree/bindings/leds/leds-pca9532.txt | 32 +++++++++++ drivers/leds/leds-pca9532.c | 63 ++++++++++++++++++++-- include/dt-bindings/leds/leds-pca9532.h | 18 +++++++ include/linux/leds-pca9532.h | 8 ++- 4 files changed, 112 insertions(+), 9 deletions(-) create mode 100644 Documentation/devicetree/bindings/leds/leds-pca9532.txt create mode 100644 include/dt-bindings/leds/leds-pca9532.h