new file mode 100644
@@ -0,0 +1,35 @@
+* TPS65086 regulator bindings
+
+Required properties:
+ - compatible : Should be "ti,tps65086-regulator".
+ - list of regulators provided by this controller, must be named after their
+ hardware counterparts: buck[1-6], ldoa[1-3], swa1, swb[1-2], and vtt.
+
+Optional properties:
+ - Per-regulator optional properties are defined in regulator.txt.
+ - ti,regulator-step-size-25mv : This is applicable for buck[1,2,6], set this
+ if the regulator is factory set with a 25mv
+ step voltage mapping.
+ - ti,regulator-decay : This is applicable for buck[1-6], set this if
+ the output needs to decay, default is for the
+ output to slew down.
+
+Example:
+
+ regulators {
+ compatible = "ti,tps65086-regulator";
+
+ buck1 {
+ regulator-name = "vcc1";
+ regulator-min-microvolt = <1600000>;
+ regulator-max-microvolt = <1600000>;
+ regulator-boot-on;
+ ti,regulator-step-size-25mv;
+ ti,regulator-decay;
+ };
+
+ swa1 {
+ regulator-name = "ls1";
+ regulator-boot-on;
+ };
+ };
The TPS65086 PMIC contains several regulators and a GPO controller. Add bindings for the TPS65086 regulators. Signed-off-by: Andrew F. Davis <afd@ti.com> --- .../bindings/regulator/tps65086-regulator.txt | 35 ++++++++++++++++++++++ 1 file changed, 35 insertions(+) create mode 100644 Documentation/devicetree/bindings/regulator/tps65086-regulator.txt