| Message ID | 1443595188-1283-2-git-send-email-wens@csie.org |
|---|---|
| State | Under Review, archived |
| Headers | show |
diff --git a/Documentation/devicetree/bindings/mfd/axp20x.txt b/Documentation/devicetree/bindings/mfd/axp20x.txt index 41811223e5be..a474359dd206 100644 --- a/Documentation/devicetree/bindings/mfd/axp20x.txt +++ b/Documentation/devicetree/bindings/mfd/axp20x.txt @@ -60,8 +60,8 @@ DCDC2 : DC-DC buck : vin2-supply DCDC3 : DC-DC buck : vin3-supply DCDC4 : DC-DC buck : vin4-supply DCDC5 : DC-DC buck : vin5-supply -DC1SW : On/Off Switch : dcdc1-supply : DCDC1 secondary output -DC5LDO : LDO : dcdc5-supply : input from DCDC5 +DC1SW : On/Off Switch : : DCDC1 secondary output +DC5LDO : LDO : : input from DCDC5 ALDO1 : LDO : aldoin-supply : shared supply ALDO2 : LDO : aldoin-supply : shared supply ALDO3 : LDO : aldoin-supply : shared supply
The DC1SW and DC5LDO regulators in the AXP221 are internally chained to DCDC1 and DCDC5, hence the names. The original bindings used the parent regulator names for the supply regulator property. This causes some confusion when we actually use it in the dts: axp221 { /* self supplying? */ dcdc1-supply = <&dcdc1>; dcdc5-supply = <&dcdc5>; dcdc1: dcdc1 { ... }; dcdc5: dcdc5 { ... }; }; Since they are internally connected within the PMIC, their relationships should not be visible in the device tree. Signed-off-by: Chen-Yu Tsai <wens@csie.org> --- Documentation/devicetree/bindings/mfd/axp20x.txt | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)