new file mode 100644
@@ -0,0 +1,36 @@
+* Freescale i.MX6UL Touch Controller
+
+Required properties:
+- compatible: must be "fsl,imx6ul-tsc".
+- reg: this touch controller address and the ADC2 address.
+- interrupts: the interrupt of this touch controller and ADC2.
+- clocks: the root clock of touch controller and ADC2.
+- clock-names; must be "tsc" and "adc".
+- xnur-gpio: the X- gpio this controller connect to.
+ This xnur-gpio returns to low once the finger leave the touch screen (The
+ last touch event the touch controller capture).
+
+Optional properties:
+- measure-delay-time: the value of measure delay time.
+ Before X-axis or Y-axis measurement, the screen need some time before
+ even potential distribution ready.
+ This value depends on the touch screen.
+- pre-charge-time: the touch screen need some time to precharge.
+ This value depends on the touch screen.
+
+Example:
+ tsc: tsc@02040000 {
+ compatible = "fsl,imx6ul-tsc";
+ reg = <0x02040000 0x4000>, <0x0219c000 0x4000>;
+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6UL_CLK_IPG>,
+ <&clks IMX6UL_CLK_ADC2>;
+ clock-names = "tsc", "adc";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_tsc>;
+ xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
+ measure-delay-time = <0xfff>;
+ pre-charge-time = <0xffff>;
+ status = "okay";
+ };
Here we apply required documentation for the imx6ul touch screen controller driver which describe available properties and how to use them. Signed-off-by: Haibo Chen <haibo.chen@freescale.com> --- .../bindings/input/touchscreen/imx6ul_tsc.txt | 36 ++++++++++++++++++++++ 1 file changed, 36 insertions(+) create mode 100644 Documentation/devicetree/bindings/input/touchscreen/imx6ul_tsc.txt