new file mode 100644
@@ -0,0 +1,49 @@
+Applied Micro X-Gene SoC DMA nodes
+
+DMA nodes are defined to describe on-chip DMA interfaces in
+APM X-Gene SoC.
+
+Required properties for DMA interfaces:
+- compatible: Should be "apm,xgene-dma".
+- device_type: set to "dma".
+- reg: Address and length of the register set for the device.
+ It contains the information of registers in the same order
+ as described by reg-names.
+- reg-names: Should contain the register set names.
+ - "dma_csr": DMA control and status register address space.
+ - "ring_csr": Descriptor ring control and status register
+ address space.
+ - "ring_cmd": Descriptor ring command register address space.
+- interrupts: DMA has 5 interrupts sources. 1st interrupt is
+ DMA error reporting interrupt. 2nd, 3rd, 4th and 5th interrupts
+ are completion interrupts for each DMA channels.
+- clocks: Reference to the clock entry.
+
+Optional properties:
+- dma-coherent : Present if dma operations are coherent
+
+Example:
+ dmaclk: dmaclk@1f27c000 {
+ compatible = "apm,xgene-device-clock";
+ #clock-cells = <1>;
+ clocks = <&socplldiv2 0>;
+ reg = <0x0 0x1f27c000 0x0 0x1000>;
+ reg-names = "csr-reg";
+ clock-output-names = "dmaclk";
+ };
+
+ dma: dma@1f270000 {
+ compatible = "apm,xgene-dma";
+ device_type = "dma";
+ reg = <0x0 0x1f270000 0x0 0x10000>,
+ <0x0 0x1f200000 0x0 0x10000>,
+ <0x0 0x1b008000 0x0 0x2000>;
+ reg-names = "dma_csr", "ring_csr", "ring_cmd";
+ interrupts = <0x0 0xb8 0x4>,
+ <0x0 0xb9 0x4>,
+ <0x0 0xba 0x4>,
+ <0x0 0xbb 0x4>,
+ <0x0 0x82 0x4>;
+ dma-coherent;
+ clocks = <&dmaclk 0>;
+ };