| Message ID | 1417352867-7436-3-git-send-email-marek@goldelico.com |
|---|---|
| State | Superseded, archived |
| Headers | show |
On 30/11/14 15:07, Marek Belisko wrote: > Signed-off-by: Marek Belisko <marek@goldelico.com> > --- > .../devicetree/bindings/video/ti,opa362.txt | 38 ++++++++++++++++++++++ > 1 file changed, 38 insertions(+) > create mode 100644 Documentation/devicetree/bindings/video/ti,opa362.txt > > diff --git a/Documentation/devicetree/bindings/video/ti,opa362.txt b/Documentation/devicetree/bindings/video/ti,opa362.txt > new file mode 100644 > index 0000000..4747ef9 > --- /dev/null > +++ b/Documentation/devicetree/bindings/video/ti,opa362.txt > @@ -0,0 +1,38 @@ > +OPA362 analog video amplifier > + > +Required properties: > +- compatible: "ti,opa362" > +- gpio: enable/disable output gpio Either this or the example is wrong. If I'm not mistaken 'gpios' is the correct form. Tomi
diff --git a/Documentation/devicetree/bindings/video/ti,opa362.txt b/Documentation/devicetree/bindings/video/ti,opa362.txt new file mode 100644 index 0000000..4747ef9 --- /dev/null +++ b/Documentation/devicetree/bindings/video/ti,opa362.txt @@ -0,0 +1,38 @@ +OPA362 analog video amplifier + +Required properties: +- compatible: "ti,opa362" +- gpio: enable/disable output gpio + +Required node: +- Video port 0 for opa362 input +- Video port 1 for opa362 output + +Example: + +tv_amp: opa362 { + compatible = "ti,opa362"; + gpios = <&gpio1 23 0>; /* GPIO to enable video out amplifier */ + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + opa_in: endpoint@0 { + remote-endpoint = <&venc_out>; + }; + }; + + port@1 { + reg = <1>; + opa_out: endpoint@0 { + remote-endpoint = <&tv_connector_in>; + }; + }; + }; +}; + + +
Signed-off-by: Marek Belisko <marek@goldelico.com> --- .../devicetree/bindings/video/ti,opa362.txt | 38 ++++++++++++++++++++++ 1 file changed, 38 insertions(+) create mode 100644 Documentation/devicetree/bindings/video/ti,opa362.txt