From patchwork Mon Jan 13 10:17:04 2014 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: =?utf-8?q?Lothar_Wa=C3=9Fmann?= X-Patchwork-Id: 309772 Return-Path: X-Original-To: incoming-dt@patchwork.ozlabs.org Delivered-To: patchwork-incoming-dt@bilbo.ozlabs.org Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by ozlabs.org (Postfix) with ESMTP id 082822C007A for ; Mon, 13 Jan 2014 21:20:09 +1100 (EST) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751395AbaAMKUH (ORCPT ); Mon, 13 Jan 2014 05:20:07 -0500 Received: from mail.karo-electronics.de ([81.173.242.67]:58426 "EHLO mail.karo-electronics.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751214AbaAMKUF (ORCPT ); Mon, 13 Jan 2014 05:20:05 -0500 From: =?UTF-8?q?Lothar=20Wa=C3=9Fmann?= To: linux-input@vger.kernel.org, Rob Herring , Pawel Moll , Mark Rutland , Ian Campbell , Kumar Gala , Rob Landley , Dmitry Torokhov , Grant Likely , Thierry Reding , Jonathan Cameron , Shawn Guo , Silvio F , Guennadi Liakhovetski , Jingoo Han , Fugang Duan , Sachin Kamat , devicetree@vger.kernel.org, linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org Cc: =?UTF-8?q?Lothar=20Wa=C3=9Fmann?= Subject: [PATCH 2/2] Input: edt-ft5x06: Add DT support Date: Mon, 13 Jan 2014 11:17:04 +0100 Message-Id: <1389608224-9975-2-git-send-email-LW@KARO-electronics.de> X-Mailer: git-send-email 1.7.2.5 In-Reply-To: <1389608224-9975-1-git-send-email-LW@KARO-electronics.de> References: <1389608224-9975-1-git-send-email-LW@KARO-electronics.de> MIME-Version: 1.0 Sender: devicetree-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org This patch allows the edt-ft5x06 multitouch panel driver to be configured via DT. Signed-off-by: Lothar Waßmann --- .../bindings/input/touchscreen/edt-ft5x06.txt | 31 ++++ drivers/input/touchscreen/edt-ft5x06.c | 145 +++++++++++++++---- 2 files changed, 145 insertions(+), 31 deletions(-) create mode 100644 Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt diff --git a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt new file mode 100644 index 0000000..629dbdd --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt @@ -0,0 +1,31 @@ +* EDT FT5x06 Multiple Touch Controller + +Required properties: +- compatible: must be "edt,ft5x06" +- reg: i2c slave address +- interrupt-parent: the phandle for the interrupt controller +- interrupts: touch controller interrupt + +Optional properties: +- reset-gpios: the gpio pin to be used for resetting the controller +- wakeup-gpios: the gpio pin to be used for waking up the controller + + The following properties provide default values for the + corresponding parameters configurable via sysfs + (see Documentation/input/edt-ft5x06.txt) +- threshold: allows setting the "click"-threshold in the range from 20 to 80. +- gain: sensitivity (0..31) (lower value -> higher sensitivity) +- offset: edge compensation (0..31) +- report_rate: report rate (3..14) + +Example: + + edt_ft5x06@38 { + compatible = "edt,ft5x06"; + reg = <0x38>; + interrupt-parent = <&gpio2>; + interrupts = <5 0>; + wakeup-gpios = <&gpio1 9 0>; + reset-gpios = <&gpio2 6 1>; + wakeup-gpios = <&gpio4 9 0>; + }; diff --git a/drivers/input/touchscreen/edt-ft5x06.c b/drivers/input/touchscreen/edt-ft5x06.c index af0d68b..02dce42 100644 --- a/drivers/input/touchscreen/edt-ft5x06.c +++ b/drivers/input/touchscreen/edt-ft5x06.c @@ -33,6 +33,7 @@ #include #include #include +#include #include #include @@ -65,6 +66,10 @@ struct edt_ft5x06_ts_data { u16 num_x; u16 num_y; + int reset_pin; + int irq_pin; + int wake_pin; + #if defined(CONFIG_DEBUG_FS) struct dentry *debug_dir; u8 *raw_buffer; @@ -617,24 +622,37 @@ edt_ft5x06_ts_teardown_debugfs(struct edt_ft5x06_ts_data *tsdata) static int edt_ft5x06_ts_reset(struct i2c_client *client, - int reset_pin) + struct edt_ft5x06_ts_data *tsdata) { int error; - if (gpio_is_valid(reset_pin)) { + if (gpio_is_valid(tsdata->wake_pin)) { + error = gpio_request_one(tsdata->wake_pin, GPIOF_OUT_INIT_LOW, + "edt-ft5x06 wake"); + if (error) { + dev_err(&client->dev, + "Failed to request GPIO %d as wake pin, error %d\n", + tsdata->wake_pin, error); + return error; + } + + mdelay(5); + gpio_set_value(tsdata->wake_pin, 1); + } + if (gpio_is_valid(tsdata->reset_pin)) { /* this pulls reset down, enabling the low active reset */ - error = gpio_request_one(reset_pin, GPIOF_OUT_INIT_LOW, + error = gpio_request_one(tsdata->reset_pin, GPIOF_OUT_INIT_LOW, "edt-ft5x06 reset"); if (error) { dev_err(&client->dev, "Failed to request GPIO %d as reset pin, error %d\n", - reset_pin, error); + tsdata->reset_pin, error); return error; } - mdelay(50); - gpio_set_value(reset_pin, 1); - mdelay(100); + mdelay(5); + gpio_set_value(tsdata->reset_pin, 1); + mdelay(300); } return 0; @@ -674,6 +692,21 @@ static int edt_ft5x06_ts_identify(struct i2c_client *client, pdata->name <= edt_ft5x06_attr_##name.limit_high) \ edt_ft5x06_register_write(tsdata, reg, pdata->name) +#define EDT_GET_PROP(name, reg) { \ + const u32 *prop = of_get_property(np, #name, NULL); \ + if (prop) \ + edt_ft5x06_register_write(tsdata, reg, be32_to_cpu(*prop)); \ +} + +static void edt_ft5x06_ts_get_dt_defaults(struct device_node *np, + struct edt_ft5x06_ts_data *tsdata) +{ + EDT_GET_PROP(threshold, WORK_REGISTER_THRESHOLD); + EDT_GET_PROP(gain, WORK_REGISTER_GAIN); + EDT_GET_PROP(offset, WORK_REGISTER_OFFSET); + EDT_GET_PROP(report_rate, WORK_REGISTER_REPORT_RATE); +} + static void edt_ft5x06_ts_get_defaults(struct edt_ft5x06_ts_data *tsdata, const struct edt_ft5x06_platform_data *pdata) @@ -701,6 +734,39 @@ edt_ft5x06_ts_get_parameters(struct edt_ft5x06_ts_data *tsdata) tsdata->num_y = edt_ft5x06_register_read(tsdata, WORK_REGISTER_NUM_Y); } +#ifdef CONFIG_OF +static int edt_ft5x06_i2c_ts_probe_dt(struct device *dev, + struct edt_ft5x06_ts_data *tsdata) +{ + int ret; + struct device_node *np = dev->of_node; + enum of_gpio_flags gpio_flags; + + if (!np) + return -ENODEV; + + /* + * irq_pin is not needed for DT setup. + * irq is associated via 'interrupts' property in DT + */ + tsdata->irq_pin = -EINVAL; + + ret = of_get_named_gpio_flags(np, "reset-gpios", 0, &gpio_flags); + tsdata->reset_pin = ret; + + ret = of_get_named_gpio_flags(np, "wake-gpios", 0, &gpio_flags); + tsdata->wake_pin = ret; + + return 0; +} +#else +static inline int edt_ft5x06_i2c_ts_probe_dt(struct device *dev, + struct edt_ft5x06_i2c_ts_data *tsdata) +{ + return -ENODEV; +} +#endif + static int edt_ft5x06_ts_probe(struct i2c_client *client, const struct i2c_device_id *id) { @@ -713,30 +779,43 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client, dev_dbg(&client->dev, "probing for EDT FT5x06 I2C\n"); + tsdata = devm_kzalloc(&client->dev, sizeof(*tsdata), GFP_KERNEL); + if (!tsdata) { + dev_err(&client->dev, "failed to allocate driver data.\n"); + return -ENOMEM; + } + if (!pdata) { - dev_err(&client->dev, "no platform data?\n"); - return -EINVAL; + error = edt_ft5x06_i2c_ts_probe_dt(&client->dev, tsdata); + if (error) { + dev_err(&client->dev, + "DT probe failed and no platform data present\n"); + return error; + } + } else { + tsdata->reset_pin = pdata->reset_pin; + tsdata->irq_pin = pdata->irq_pin; + tsdata->wake_pin = -EINVAL; } - error = edt_ft5x06_ts_reset(client, pdata->reset_pin); + error = edt_ft5x06_ts_reset(client, tsdata); if (error) return error; - if (gpio_is_valid(pdata->irq_pin)) { - error = gpio_request_one(pdata->irq_pin, + if (gpio_is_valid(tsdata->irq_pin)) { + error = gpio_request_one(tsdata->irq_pin, GPIOF_IN, "edt-ft5x06 irq"); if (error) { dev_err(&client->dev, "Failed to request GPIO %d, error %d\n", - pdata->irq_pin, error); + tsdata->irq_pin, error); return error; } } - tsdata = kzalloc(sizeof(*tsdata), GFP_KERNEL); input = input_allocate_device(); - if (!tsdata || !input) { - dev_err(&client->dev, "failed to allocate driver data.\n"); + if (!input) { + dev_err(&client->dev, "failed to allocate input device.\n"); error = -ENOMEM; goto err_free_mem; } @@ -752,7 +831,11 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client, goto err_free_mem; } - edt_ft5x06_ts_get_defaults(tsdata, pdata); + if (!pdata) + edt_ft5x06_ts_get_dt_defaults(client->dev.of_node, tsdata); + else + edt_ft5x06_ts_get_defaults(tsdata, pdata); + edt_ft5x06_ts_get_parameters(tsdata); dev_dbg(&client->dev, @@ -802,8 +885,8 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client, device_init_wakeup(&client->dev, 1); dev_dbg(&client->dev, - "EDT FT5x06 initialized: IRQ pin %d, Reset pin %d.\n", - pdata->irq_pin, pdata->reset_pin); + "EDT FT5x06 initialized: IRQ %d, WAKE pin %d, Reset pin %d.\n", + client->irq, tsdata->wake_pin, tsdata->reset_pin); return 0; @@ -813,18 +896,18 @@ err_free_irq: free_irq(client->irq, tsdata); err_free_mem: input_free_device(input); - kfree(tsdata); - - if (gpio_is_valid(pdata->irq_pin)) - gpio_free(pdata->irq_pin); + if (gpio_is_valid(tsdata->irq_pin)) + gpio_free(tsdata->irq_pin); + if (gpio_is_valid(tsdata->reset_pin)) + gpio_free(tsdata->reset_pin); + if (gpio_is_valid(tsdata->wake_pin)) + gpio_free(tsdata->wake_pin); return error; } static int edt_ft5x06_ts_remove(struct i2c_client *client) { - const struct edt_ft5x06_platform_data *pdata = - dev_get_platdata(&client->dev); struct edt_ft5x06_ts_data *tsdata = i2c_get_clientdata(client); edt_ft5x06_ts_teardown_debugfs(tsdata); @@ -833,12 +916,12 @@ static int edt_ft5x06_ts_remove(struct i2c_client *client) free_irq(client->irq, tsdata); input_unregister_device(tsdata->input); - if (gpio_is_valid(pdata->irq_pin)) - gpio_free(pdata->irq_pin); - if (gpio_is_valid(pdata->reset_pin)) - gpio_free(pdata->reset_pin); - - kfree(tsdata); + if (gpio_is_valid(tsdata->irq_pin)) + gpio_free(tsdata->irq_pin); + if (gpio_is_valid(tsdata->reset_pin)) + gpio_free(tsdata->reset_pin); + if (gpio_is_valid(tsdata->wake_pin)) + gpio_free(tsdata->wake_pin); return 0; }