mbox series

[v2,0/4] Add display support for stm32mp135f-dk board

Message ID 20240217-ltdc_mp13-v2-0-50881f1b394e@foss.st.com
Headers show
Series Add display support for stm32mp135f-dk board | expand

Message

Raphael Gallais-Pou Feb. 17, 2024, 11:02 a.m. UTC 
This serie aims to enable display support for the stm32mp135f-dk board

Those are only patches of the device-tree since the driver support has
already been added [1].

It respectivelly:
	- adds support for the display controller on stm32mp135
	- adds pinctrl for the display controller
	- enables panel, backlight and display controller on
	  stm32mp135f-dk

Finally it fixes the flags on the panel default mode in the
'panel-simple' driver, allowing to override the default mode by one
described in the device tree, and push further the blanking limit on the
panel.

[1] commit 1726cee3d053 ("drm/stm: ltdc: support of new hardware version")

Changes in v2:
  - Removed already merged patches
https://lore.kernel.org/lkml/170729755552.1647630.4818786052103823648.b4-ty@linaro.org/
https://lore.kernel.org/lkml/170729755662.1647630.425379349649657352.b4-ty@linaro.org/
  - Fixed CHECK_DTBS warnings
  - Added missing properties in panel-simple.yaml

Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
---
Raphael Gallais-Pou (4):
      ARM: dts: stm32: add LTDC support for STM32MP13x SoC family
      ARM: dts: stm32: add LTDC pinctrl on STM32MP13x SoC family
      ARM: dts: stm32: enable display support on stm32mp135f-dk board
      dt-bindings: display: simple: hardware can use several properties

 .../bindings/display/panel/panel-simple.yaml       |  3 ++
 arch/arm/boot/dts/st/stm32mp13-pinctrl.dtsi        | 57 ++++++++++++++++++++++
 arch/arm/boot/dts/st/stm32mp135.dtsi               | 11 +++++
 arch/arm/boot/dts/st/stm32mp135f-dk.dts            | 53 ++++++++++++++++++++
 4 files changed, 124 insertions(+)
---
base-commit: 6613476e225e090cc9aad49be7fa504e290dd33d
change-id: 20240124-ltdc_mp13-2f86a782424c

Best regards,