mbox series

[v2,0/3] Add support for HTC One Mini 2 smartphone

Message ID 20231024-htc-memul-v2-0-8912940b6f95@z3ntu.xyz
Headers show
Series Add support for HTC One Mini 2 smartphone | expand

Message

Luca Weiss Oct. 24, 2023, 8:57 p.m. UTC 
Add support for this smartphone from HTC which is based on the MSM8926
SoC and codenamed "memul".

Depends on, runtime-only, bootloader enables watchdog so we need to pet
it to stay alive:
https://lore.kernel.org/linux-arm-msm/20231011-msm8226-msm8974-watchdog-v1-0-2c472818fbce@z3ntu.xyz/T/

Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
---
Changes in v2:
- Pick up tags
- Add spaces around regulator nodes
- Set firmware-name for adsp
- Expand reserved memory regions to cover everything somehow reserved
  downstream, leave no gaps. Seems to finally fix also nbd randomly
  failing
- Remove internal storage since somehow it has killed itself on my
  device since last time, maybe by my random memory testing writing some
  not-so-great commands to it. So let's be safe and remove it.
- Link to v1: https://lore.kernel.org/r/20231011-htc-memul-v1-0-76e57873190c@z3ntu.xyz

---
Luca Weiss (3):
      dt-bindings: vendor-prefixes: document HTC Corporation
      dt-bindings: arm: qcom: Add HTC One Mini 2
      ARM: dts: qcom: Add support for HTC One Mini 2

 Documentation/devicetree/bindings/arm/qcom.yaml    |   1 +
 .../devicetree/bindings/vendor-prefixes.yaml       |   2 +
 arch/arm/boot/dts/qcom/Makefile                    |   1 +
 arch/arm/boot/dts/qcom/qcom-msm8926-htc-memul.dts  | 369 +++++++++++++++++++++
 4 files changed, 373 insertions(+)
---
base-commit: 9b969874004ff05d05e4340bacc1699f72f58686
change-id: 20231002-htc-memul-742a8517d24b

Best regards,

Comments

Konrad Dybcio Oct. 26, 2023, 7:36 p.m. UTC | #1 
On 10/24/23 22:57, Luca Weiss wrote:
> Add support for this smartphone based on the MSM8926 SoC, codenamed
> "memul".
> 
> Supported functionality:
> * Power & volume buttons
> * ADSP
> * Magnetometer
> * Accelerometer
> * Touchscreen
> * Vibrator
> * SD card
> * Charger
> * USB
> 
> Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
> ---
sdhci vddio should have regulator-allow-set-load

otherwise:

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad