| Message ID | 20210601200007.218802-1-stephan@gerhold.net |
|---|---|
| Headers | show |
| Series | extcon: sm5502: Add support for SM5504 | expand |
On 21. 6. 2. 오전 5:00, Stephan Gerhold wrote: > Prepare for supporting SM5504 in the extcon-sm5502 driver by replacing > enum sm5504_types with a struct sm5504_type that stores the chip-specific > definitions. This struct can then be defined separately for SM5504 > without having to add if (type == TYPE_SM5504) everywhere in the code. > > Signed-off-by: Stephan Gerhold <stephan@gerhold.net> > --- > Changes in v3: New patch to simplify diff on next patch > --- > drivers/extcon/extcon-sm5502.c | 64 +++++++++++++++++++++------------- > drivers/extcon/extcon-sm5502.h | 4 --- > 2 files changed, 40 insertions(+), 28 deletions(-) > > diff --git a/drivers/extcon/extcon-sm5502.c b/drivers/extcon/extcon-sm5502.c > index 9f40bb9f1f81..951f6ca4c479 100644 > --- a/drivers/extcon/extcon-sm5502.c > +++ b/drivers/extcon/extcon-sm5502.c > @@ -40,17 +40,13 @@ struct sm5502_muic_info { > struct i2c_client *i2c; > struct regmap *regmap; > > + const struct sm5502_type *type; > struct regmap_irq_chip_data *irq_data; > - struct muic_irq *muic_irqs; > - unsigned int num_muic_irqs; > int irq; > bool irq_attach; > bool irq_detach; > struct work_struct irq_work; > > - struct reg_data *reg_data; > - unsigned int num_reg_data; > - > struct mutex mutex; > > /* > @@ -62,6 +58,17 @@ struct sm5502_muic_info { > struct delayed_work wq_detcable; > }; > > +struct sm5502_type { > + struct muic_irq *muic_irqs; > + unsigned int num_muic_irqs; > + const struct regmap_irq_chip *irq_chip; > + > + struct reg_data *reg_data; > + unsigned int num_reg_data; > + > + int (*parse_irq)(struct sm5502_muic_info *info, int irq_type); > +}; > + > /* Default value of SM5502 register to bring up MUIC device. */ > static struct reg_data sm5502_reg_data[] = { > { > @@ -502,11 +509,11 @@ static irqreturn_t sm5502_muic_irq_handler(int irq, void *data) > struct sm5502_muic_info *info = data; > int i, irq_type = -1, ret; > > - for (i = 0; i < info->num_muic_irqs; i++) > - if (irq == info->muic_irqs[i].virq) > - irq_type = info->muic_irqs[i].irq; > + for (i = 0; i < info->type->num_muic_irqs; i++) > + if (irq == info->type->muic_irqs[i].virq) > + irq_type = info->type->muic_irqs[i].irq; > > - ret = sm5502_parse_irq(info, irq_type); > + ret = info->type->parse_irq(info, irq_type); Looks good to me. But there is only one comment. Need to check the 'parse_irq' as following: If you agree this suggestion, I'll apply with following changes by myself: if (!info->type->parse_irq) { dev_err(info->dev, "failed to handle irq due to parse_irq\n", return IRQ_NONE; } (snip)
On Thu, Jun 03, 2021 at 12:13:18AM +0900, Chanwoo Choi wrote: > On 21. 6. 2. 오전 5:00, Stephan Gerhold wrote: > > Prepare for supporting SM5504 in the extcon-sm5502 driver by replacing > > enum sm5504_types with a struct sm5504_type that stores the chip-specific > > definitions. This struct can then be defined separately for SM5504 > > without having to add if (type == TYPE_SM5504) everywhere in the code. > > > > Signed-off-by: Stephan Gerhold <stephan@gerhold.net> > > --- > > Changes in v3: New patch to simplify diff on next patch > > --- > > drivers/extcon/extcon-sm5502.c | 64 +++++++++++++++++++++------------- > > drivers/extcon/extcon-sm5502.h | 4 --- > > 2 files changed, 40 insertions(+), 28 deletions(-) > > > > diff --git a/drivers/extcon/extcon-sm5502.c b/drivers/extcon/extcon-sm5502.c > > index 9f40bb9f1f81..951f6ca4c479 100644 > > --- a/drivers/extcon/extcon-sm5502.c > > +++ b/drivers/extcon/extcon-sm5502.c > > @@ -40,17 +40,13 @@ struct sm5502_muic_info { > > struct i2c_client *i2c; > > struct regmap *regmap; > > + const struct sm5502_type *type; > > struct regmap_irq_chip_data *irq_data; > > - struct muic_irq *muic_irqs; > > - unsigned int num_muic_irqs; > > int irq; > > bool irq_attach; > > bool irq_detach; > > struct work_struct irq_work; > > - struct reg_data *reg_data; > > - unsigned int num_reg_data; > > - > > struct mutex mutex; > > /* > > @@ -62,6 +58,17 @@ struct sm5502_muic_info { > > struct delayed_work wq_detcable; > > }; > > +struct sm5502_type { > > + struct muic_irq *muic_irqs; > > + unsigned int num_muic_irqs; > > + const struct regmap_irq_chip *irq_chip; > > + > > + struct reg_data *reg_data; > > + unsigned int num_reg_data; > > + > > + int (*parse_irq)(struct sm5502_muic_info *info, int irq_type); > > +}; > > + > > /* Default value of SM5502 register to bring up MUIC device. */ > > static struct reg_data sm5502_reg_data[] = { > > { > > @@ -502,11 +509,11 @@ static irqreturn_t sm5502_muic_irq_handler(int irq, void *data) > > struct sm5502_muic_info *info = data; > > int i, irq_type = -1, ret; > > - for (i = 0; i < info->num_muic_irqs; i++) > > - if (irq == info->muic_irqs[i].virq) > > - irq_type = info->muic_irqs[i].irq; > > + for (i = 0; i < info->type->num_muic_irqs; i++) > > + if (irq == info->type->muic_irqs[i].virq) > > + irq_type = info->type->muic_irqs[i].irq; > > - ret = sm5502_parse_irq(info, irq_type); > > + ret = info->type->parse_irq(info, irq_type); > > Looks good to me. But there is only one comment. > Need to check the 'parse_irq' as following: > > If you agree this suggestion, I'll apply with following changes by myself: > > if (!info->type->parse_irq) { > dev_err(info->dev, "failed to handle irq due to parse_irq\n", > return IRQ_NONE; > } > > This condition should be impossible, since .parse_irq is set for both SM5502 and SM5504: static const struct sm5502_type sm5502_data = { /* ... */ .parse_irq = sm5502_parse_irq, }; static const struct sm5502_type sm5504_data = { /* ... */ .parse_irq = sm5504_parse_irq, }; Which failure case are you trying to handle with that if statement? Thanks! Stephan
On 21. 6. 3. 오전 12:20, Stephan Gerhold wrote: > On Thu, Jun 03, 2021 at 12:13:18AM +0900, Chanwoo Choi wrote: >> On 21. 6. 2. 오전 5:00, Stephan Gerhold wrote: >>> Prepare for supporting SM5504 in the extcon-sm5502 driver by replacing >>> enum sm5504_types with a struct sm5504_type that stores the chip-specific >>> definitions. This struct can then be defined separately for SM5504 >>> without having to add if (type == TYPE_SM5504) everywhere in the code. >>> >>> Signed-off-by: Stephan Gerhold <stephan@gerhold.net> >>> --- >>> Changes in v3: New patch to simplify diff on next patch >>> --- >>> drivers/extcon/extcon-sm5502.c | 64 +++++++++++++++++++++------------- >>> drivers/extcon/extcon-sm5502.h | 4 --- >>> 2 files changed, 40 insertions(+), 28 deletions(-) >>> >>> diff --git a/drivers/extcon/extcon-sm5502.c b/drivers/extcon/extcon-sm5502.c >>> index 9f40bb9f1f81..951f6ca4c479 100644 >>> --- a/drivers/extcon/extcon-sm5502.c >>> +++ b/drivers/extcon/extcon-sm5502.c >>> @@ -40,17 +40,13 @@ struct sm5502_muic_info { >>> struct i2c_client *i2c; >>> struct regmap *regmap; >>> + const struct sm5502_type *type; >>> struct regmap_irq_chip_data *irq_data; >>> - struct muic_irq *muic_irqs; >>> - unsigned int num_muic_irqs; >>> int irq; >>> bool irq_attach; >>> bool irq_detach; >>> struct work_struct irq_work; >>> - struct reg_data *reg_data; >>> - unsigned int num_reg_data; >>> - >>> struct mutex mutex; >>> /* >>> @@ -62,6 +58,17 @@ struct sm5502_muic_info { >>> struct delayed_work wq_detcable; >>> }; >>> +struct sm5502_type { >>> + struct muic_irq *muic_irqs; >>> + unsigned int num_muic_irqs; >>> + const struct regmap_irq_chip *irq_chip; >>> + >>> + struct reg_data *reg_data; >>> + unsigned int num_reg_data; >>> + >>> + int (*parse_irq)(struct sm5502_muic_info *info, int irq_type); >>> +}; >>> + >>> /* Default value of SM5502 register to bring up MUIC device. */ >>> static struct reg_data sm5502_reg_data[] = { >>> { >>> @@ -502,11 +509,11 @@ static irqreturn_t sm5502_muic_irq_handler(int irq, void *data) >>> struct sm5502_muic_info *info = data; >>> int i, irq_type = -1, ret; >>> - for (i = 0; i < info->num_muic_irqs; i++) >>> - if (irq == info->muic_irqs[i].virq) >>> - irq_type = info->muic_irqs[i].irq; >>> + for (i = 0; i < info->type->num_muic_irqs; i++) >>> + if (irq == info->type->muic_irqs[i].virq) >>> + irq_type = info->type->muic_irqs[i].irq; >>> - ret = sm5502_parse_irq(info, irq_type); >>> + ret = info->type->parse_irq(info, irq_type); >> >> Looks good to me. But there is only one comment. >> Need to check the 'parse_irq' as following: >> >> If you agree this suggestion, I'll apply with following changes by myself: >> >> if (!info->type->parse_irq) { >> dev_err(info->dev, "failed to handle irq due to parse_irq\n", >> return IRQ_NONE; >> } >> >> > > This condition should be impossible, since .parse_irq is set for both > SM5502 and SM5504: > > static const struct sm5502_type sm5502_data = { > /* ... */ > .parse_irq = sm5502_parse_irq, > }; > > static const struct sm5502_type sm5504_data = { > /* ... */ > .parse_irq = sm5504_parse_irq, > }; > > Which failure case are you trying to handle with that if statement? There is not failure case of this patchset. But, this refactoring suggestion has the potential problem without checking whether mandatory function pointer is NULL or not. When adding new chip by using this driver, the author might have the human error without parse_irq initialization even if the mandatory. > > Thanks! > Stephan >
On 21. 6. 3. 오전 12:30, Chanwoo Choi wrote: > On 21. 6. 3. 오전 12:20, Stephan Gerhold wrote: >> On Thu, Jun 03, 2021 at 12:13:18AM +0900, Chanwoo Choi wrote: >>> On 21. 6. 2. 오전 5:00, Stephan Gerhold wrote: >>>> Prepare for supporting SM5504 in the extcon-sm5502 driver by replacing >>>> enum sm5504_types with a struct sm5504_type that stores the >>>> chip-specific >>>> definitions. This struct can then be defined separately for SM5504 >>>> without having to add if (type == TYPE_SM5504) everywhere in the code. >>>> >>>> Signed-off-by: Stephan Gerhold <stephan@gerhold.net> >>>> --- >>>> Changes in v3: New patch to simplify diff on next patch >>>> --- >>>> drivers/extcon/extcon-sm5502.c | 64 >>>> +++++++++++++++++++++------------- >>>> drivers/extcon/extcon-sm5502.h | 4 --- >>>> 2 files changed, 40 insertions(+), 28 deletions(-) >>>> >>>> diff --git a/drivers/extcon/extcon-sm5502.c >>>> b/drivers/extcon/extcon-sm5502.c >>>> index 9f40bb9f1f81..951f6ca4c479 100644 >>>> --- a/drivers/extcon/extcon-sm5502.c >>>> +++ b/drivers/extcon/extcon-sm5502.c >>>> @@ -40,17 +40,13 @@ struct sm5502_muic_info { >>>> struct i2c_client *i2c; >>>> struct regmap *regmap; >>>> + const struct sm5502_type *type; >>>> struct regmap_irq_chip_data *irq_data; >>>> - struct muic_irq *muic_irqs; >>>> - unsigned int num_muic_irqs; >>>> int irq; >>>> bool irq_attach; >>>> bool irq_detach; >>>> struct work_struct irq_work; >>>> - struct reg_data *reg_data; >>>> - unsigned int num_reg_data; >>>> - >>>> struct mutex mutex; >>>> /* >>>> @@ -62,6 +58,17 @@ struct sm5502_muic_info { >>>> struct delayed_work wq_detcable; >>>> }; >>>> +struct sm5502_type { >>>> + struct muic_irq *muic_irqs; >>>> + unsigned int num_muic_irqs; >>>> + const struct regmap_irq_chip *irq_chip; >>>> + >>>> + struct reg_data *reg_data; >>>> + unsigned int num_reg_data; >>>> + >>>> + int (*parse_irq)(struct sm5502_muic_info *info, int irq_type); >>>> +}; >>>> + >>>> /* Default value of SM5502 register to bring up MUIC device. */ >>>> static struct reg_data sm5502_reg_data[] = { >>>> { >>>> @@ -502,11 +509,11 @@ static irqreturn_t sm5502_muic_irq_handler(int >>>> irq, void *data) >>>> struct sm5502_muic_info *info = data; >>>> int i, irq_type = -1, ret; >>>> - for (i = 0; i < info->num_muic_irqs; i++) >>>> - if (irq == info->muic_irqs[i].virq) >>>> - irq_type = info->muic_irqs[i].irq; >>>> + for (i = 0; i < info->type->num_muic_irqs; i++) >>>> + if (irq == info->type->muic_irqs[i].virq) >>>> + irq_type = info->type->muic_irqs[i].irq; >>>> - ret = sm5502_parse_irq(info, irq_type); >>>> + ret = info->type->parse_irq(info, irq_type); >>> >>> Looks good to me. But there is only one comment. >>> Need to check the 'parse_irq' as following: >>> >>> If you agree this suggestion, I'll apply with following changes by >>> myself: >>> >>> if (!info->type->parse_irq) { >>> dev_err(info->dev, "failed to handle irq due to parse_irq\n", >>> return IRQ_NONE; >>> } >>> >>> >> >> This condition should be impossible, since .parse_irq is set for both >> SM5502 and SM5504: >> >> static const struct sm5502_type sm5502_data = { >> /* ... */ >> .parse_irq = sm5502_parse_irq, >> }; >> >> static const struct sm5502_type sm5504_data = { >> /* ... */ >> .parse_irq = sm5504_parse_irq, >> }; >> >> Which failure case are you trying to handle with that if statement? > > There is not failure case of this patchset. But, this refactoring > suggestion has the potential problem without checking whether mandatory > function pointer is NULL or not. When adding new chip by using this > driver, the author might have the human error without parse_irq > initialization even if the mandatory. > Instead, it is better to check whether parser_irq is NULL or not on probe function in order to reduce the unnecessary repetitive checking. >> >> Thanks! >> Stephan >> > >
On 6/3/21 12:42 AM, Stephan Gerhold wrote: > On Thu, Jun 03, 2021 at 12:35:58AM +0900, Chanwoo Choi wrote: >> On 21. 6. 3. 오전 12:30, Chanwoo Choi wrote: >>> On 21. 6. 3. 오전 12:20, Stephan Gerhold wrote: >>>> On Thu, Jun 03, 2021 at 12:13:18AM +0900, Chanwoo Choi wrote: >>>>> On 21. 6. 2. 오전 5:00, Stephan Gerhold wrote: >>>>>> Prepare for supporting SM5504 in the extcon-sm5502 driver by replacing >>>>>> enum sm5504_types with a struct sm5504_type that stores the >>>>>> chip-specific >>>>>> definitions. This struct can then be defined separately for SM5504 >>>>>> without having to add if (type == TYPE_SM5504) everywhere in the code. >>>>>> >>>>>> Signed-off-by: Stephan Gerhold <stephan@gerhold.net> >>>>>> --- >>>>>> Changes in v3: New patch to simplify diff on next patch >>>>>> --- >>>>>> drivers/extcon/extcon-sm5502.c | 64 >>>>>> +++++++++++++++++++++------------- >>>>>> drivers/extcon/extcon-sm5502.h | 4 --- >>>>>> 2 files changed, 40 insertions(+), 28 deletions(-) >>>>>> >>>>>> diff --git a/drivers/extcon/extcon-sm5502.c >>>>>> b/drivers/extcon/extcon-sm5502.c >>>>>> index 9f40bb9f1f81..951f6ca4c479 100644 >>>>>> --- a/drivers/extcon/extcon-sm5502.c >>>>>> +++ b/drivers/extcon/extcon-sm5502.c >>>>>> @@ -40,17 +40,13 @@ struct sm5502_muic_info { >>>>>> struct i2c_client *i2c; >>>>>> struct regmap *regmap; >>>>>> + const struct sm5502_type *type; >>>>>> struct regmap_irq_chip_data *irq_data; >>>>>> - struct muic_irq *muic_irqs; >>>>>> - unsigned int num_muic_irqs; >>>>>> int irq; >>>>>> bool irq_attach; >>>>>> bool irq_detach; >>>>>> struct work_struct irq_work; >>>>>> - struct reg_data *reg_data; >>>>>> - unsigned int num_reg_data; >>>>>> - >>>>>> struct mutex mutex; >>>>>> /* >>>>>> @@ -62,6 +58,17 @@ struct sm5502_muic_info { >>>>>> struct delayed_work wq_detcable; >>>>>> }; >>>>>> +struct sm5502_type { >>>>>> + struct muic_irq *muic_irqs; >>>>>> + unsigned int num_muic_irqs; >>>>>> + const struct regmap_irq_chip *irq_chip; >>>>>> + >>>>>> + struct reg_data *reg_data; >>>>>> + unsigned int num_reg_data; >>>>>> + >>>>>> + int (*parse_irq)(struct sm5502_muic_info *info, int irq_type); >>>>>> +}; >>>>>> + >>>>>> /* Default value of SM5502 register to bring up MUIC device. */ >>>>>> static struct reg_data sm5502_reg_data[] = { >>>>>> { >>>>>> @@ -502,11 +509,11 @@ static irqreturn_t >>>>>> sm5502_muic_irq_handler(int irq, void *data) >>>>>> struct sm5502_muic_info *info = data; >>>>>> int i, irq_type = -1, ret; >>>>>> - for (i = 0; i < info->num_muic_irqs; i++) >>>>>> - if (irq == info->muic_irqs[i].virq) >>>>>> - irq_type = info->muic_irqs[i].irq; >>>>>> + for (i = 0; i < info->type->num_muic_irqs; i++) >>>>>> + if (irq == info->type->muic_irqs[i].virq) >>>>>> + irq_type = info->type->muic_irqs[i].irq; >>>>>> - ret = sm5502_parse_irq(info, irq_type); >>>>>> + ret = info->type->parse_irq(info, irq_type); >>>>> >>>>> Looks good to me. But there is only one comment. >>>>> Need to check the 'parse_irq' as following: >>>>> >>>>> If you agree this suggestion, I'll apply with following changes >>>>> by myself: >>>>> >>>>> if (!info->type->parse_irq) { >>>>> dev_err(info->dev, "failed to handle irq due to parse_irq\n", >>>>> return IRQ_NONE; >>>>> } >>>>> >>>>> >>>> >>>> This condition should be impossible, since .parse_irq is set for both >>>> SM5502 and SM5504: >>>> >>>> static const struct sm5502_type sm5502_data = { >>>> /* ... */ >>>> .parse_irq = sm5502_parse_irq, >>>> }; >>>> >>>> static const struct sm5502_type sm5504_data = { >>>> /* ... */ >>>> .parse_irq = sm5504_parse_irq, >>>> }; >>>> >>>> Which failure case are you trying to handle with that if statement? >>> >>> There is not failure case of this patchset. But, this refactoring >>> suggestion has the potential problem without checking whether mandatory >>> function pointer is NULL or not. When adding new chip by using this >>> driver, the author might have the human error without parse_irq >>> initialization even if the mandatory. >>> >> >> Instead, it is better to check whether parser_irq is NULL or not >> on probe function in order to reduce the unnecessary repetitive checking. >> > > Thanks for the explanation. This suggestion sounds better to me. > (Although I consider it unlikely that someone would forget to define > .parse_irq when adding a new chip...) > > Feel free to add something like the below when applying. > Or let me know if I should re-send with this change: Please resend them. Thanks. > > diff --git a/drivers/extcon/extcon-sm5502.c b/drivers/extcon/extcon-sm5502.c > index af44c1e2f368..93da2d8379b1 100644 > --- a/drivers/extcon/extcon-sm5502.c > +++ b/drivers/extcon/extcon-sm5502.c > @@ -694,6 +694,10 @@ static int sm5022_muic_i2c_probe(struct i2c_client *i2c) > info->type = device_get_match_data(info->dev); > if (!info->type) > return -EINVAL; > + if (!info->type->parse_irq) { > + dev_err(info->dev, "parse_irq missing in struct sm5502_type\n"); > + return -EINVAL; > + } > > mutex_init(&info->mutex); > > > Thanks for your review! > Stephan > >
This patch series adds support for SM5504 to the existing extcon-sm5502 driver. SM5502 and SM5504 are fairly similar so support for SM5504 can be added with a few simple if statements in the code. I also put a few cleanup patches in front and convert the device tree bindings to DT schema. I tested this patch series on both SM5502 (Samsung Galaxy A5 2015) and SM5504 (Samsung Galaxy S4 Mini Value Edition) and it seems to work just fine for both. --- Changes in v3: - Drop patch 1-4 (already applied) - Avoid if (type == TYPE_SM5504) everywhere in the code, instead introduce a struct sm5502_type that encodes chip-specific information. v2: https://lore.kernel.org/lkml/20210531133438.3511-1-stephan@gerhold.net/ Changes in v2: Fix compile warning in last patch v1: https://lore.kernel.org/lkml/20210520112334.129556-1-stephan@gerhold.net/ Stephan Gerhold (3): dt-bindings: extcon: sm5502: Document siliconmitus,sm5504-muic extcon: sm5502: Refactor driver to use chip-specific struct extcon: sm5502: Add support for SM5504 .../extcon/siliconmitus,sm5502-muic.yaml | 6 +- drivers/extcon/Kconfig | 2 +- drivers/extcon/extcon-sm5502.c | 196 +++++++++++++++--- drivers/extcon/extcon-sm5502.h | 82 +++++++- 4 files changed, 248 insertions(+), 38 deletions(-)