mbox series

[v7,0/4] Enable wm8524 on i.MX8MQ-EVK

Message ID 20190319174823.29467-1-daniel.baluta@nxp.com
Headers show
Series Enable wm8524 on i.MX8MQ-EVK | expand

Message

Daniel Baluta March 19, 2019, 5:48 p.m. UTC 
On i.MX8MQ EVK we can start the party using the wm8524 codec
which gets it's data through the SAI2 interface.

In order to make it work this patch series enables the SDMA nodes,
sets the correct pinctrl configuration and uses the simple card
machine driver to put everything together.

Changes since v6: (after Shawn's comments)
	- rebased on latest Shawn's for-next branch
	- added new lines between properties and child nodes
	- added new lines between child nodes
	- keep pinctrl nodes sorted
	- added reviewed by after SoBs in commit message

Changes since v5:
        - remove clocks and clock-names properties from wm8524
        code node as they are not used.

Changes since v4 (after Fabio's review)
        - removed mclk0 from sai2 node because it is not yet supported
          by SAI driver
        - s/audio-codec-0/audio-codec
        - squashed patches 4 and 5

Changes since v3:
        - use "arm64: dts: imx8mq-evk" prefix for patches specific to
          8MQ-EVK
        - squash together patches for setting up SAI (previous 3/5 and
          4/5)
        - add back and document "fsl, imx8mq-sdma" compatbile string

Changes since v2:
        - s/QM/MQ after Chris comments

Changes since v1:
        - added cover letter
        - remove "fsl,imx8mq-sdma" compatible for sdma.

Daniel Baluta (4):
  arm64: dts: imx8mq: Add SDMA nodes
  bindings: fsl-imx-sdma: Document fsl,imx8mq-sdma compatbile string
  arm64: dts: imx8mq: Add SAI2 node
  arm64: dts: imx8mq-evk: Enable audio codec wm8524

 .../devicetree/bindings/dma/fsl-imx-sdma.txt  |  1 +
 arch/arm64/boot/dts/freescale/imx8mq-evk.dts  | 48 +++++++++++++++++++
 arch/arm64/boot/dts/freescale/imx8mq.dtsi     | 37 ++++++++++++++
 3 files changed, 86 insertions(+)

Comments

Shawn Guo March 20, 2019, 7:55 a.m. UTC | #1 
On Tue, Mar 19, 2019 at 05:48:35PM +0000, Daniel Baluta wrote:
> On i.MX8MQ EVK we can start the party using the wm8524 codec
> which gets it's data through the SAI2 interface.
> 
> In order to make it work this patch series enables the SDMA nodes,
> sets the correct pinctrl configuration and uses the simple card
> machine driver to put everything together.
> 
> Changes since v6: (after Shawn's comments)
> 	- rebased on latest Shawn's for-next branch
> 	- added new lines between properties and child nodes
> 	- added new lines between child nodes
> 	- keep pinctrl nodes sorted
> 	- added reviewed by after SoBs in commit message
> 
> Changes since v5:
>         - remove clocks and clock-names properties from wm8524
>         code node as they are not used.
> 
> Changes since v4 (after Fabio's review)
>         - removed mclk0 from sai2 node because it is not yet supported
>           by SAI driver
>         - s/audio-codec-0/audio-codec
>         - squashed patches 4 and 5
> 
> Changes since v3:
>         - use "arm64: dts: imx8mq-evk" prefix for patches specific to
>           8MQ-EVK
>         - squash together patches for setting up SAI (previous 3/5 and
>           4/5)
>         - add back and document "fsl, imx8mq-sdma" compatbile string
> 
> Changes since v2:
>         - s/QM/MQ after Chris comments
> 
> Changes since v1:
>         - added cover letter
>         - remove "fsl,imx8mq-sdma" compatible for sdma.
> 
> Daniel Baluta (4):
>   arm64: dts: imx8mq: Add SDMA nodes
>   bindings: fsl-imx-sdma: Document fsl,imx8mq-sdma compatbile string
>   arm64: dts: imx8mq: Add SAI2 node
>   arm64: dts: imx8mq-evk: Enable audio codec wm8524

Applied all, thanks.