@@ -785,10 +785,12 @@ F: package/xinetd/
N: Dario Binacchi <dario.binacchi@amarulasolutions.com>
F: board/bsh/
+F: board/stmicroelectronics/stm32f746-disco/
F: board/stmicroelectronics/stm32f769-disco/
F: configs/imx6ulz_bsh_smm_m2_defconfig
F: configs/imx8mn_bsh_smm_s2_defconfig
F: configs/imx8mn_bsh_smm_s2_pro_defconfig
+F: configs/stm32f746_disco_sd_defconfig
F: configs/stm32f769_disco_sd_defconfig
F: package/sscep/
F: package/tinyinit/
new file mode 100644
@@ -0,0 +1,4 @@
+label stm32f746-disco-buildroot
+ kernel /zImage
+ devicetree /stm32f746-disco.dtb
+ append console=ttySTM0,115200 root=/dev/mmcblk0p2 rw rootwait consoleblank=0 ignore_loglevel
new file mode 100755
@@ -0,0 +1,22 @@
+#!/bin/bash
+
+if [ $# -eq 0 ]; then
+ OUTPUT_DIR=output
+else
+ OUTPUT_DIR=$1
+fi
+
+if ! test -d "${OUTPUT_DIR}" ; then
+ echo "ERROR: no output directory specified."
+ echo "Usage: $0 OUTPUT_DIR"
+ exit 1
+fi
+
+"${OUTPUT_DIR}"/host/bin/openocd -f board/stm32f746g-disco.cfg \
+ -c "init" \
+ -c "reset init" \
+ -c "flash probe 0" \
+ -c "flash info 0" \
+ -c "flash write_image erase ${OUTPUT_DIR}/images/u-boot.bin 0x08000000" \
+ -c "reset run" \
+ -c "shutdown"
new file mode 100644
@@ -0,0 +1,27 @@
+image boot.vfat {
+ vfat {
+ files = {
+ "zImage",
+ "stm32f746-disco.dtb",
+ "extlinux"
+ }
+ }
+
+ size = 16M
+}
+
+image sdcard.img {
+ hdimage {
+ }
+
+ partition u-boot {
+ partition-type = 0xC
+ image = "boot.vfat"
+ }
+
+ partition rootfs {
+ partition-type = 0x83
+ image = "rootfs.ext2"
+ size = 32M
+ }
+}
new file mode 100644
@@ -0,0 +1,13 @@
+# CONFIG_PREEMPT is not set
+# CONFIG_MULTIUSER is not set
+# CONFIG_TIMERFD is not set
+CONFIG_SET_MEM_PARAM=y
+CONFIG_DRAM_BASE=0xC0000000
+CONFIG_DRAM_SIZE=0x01000000
+# CONFIG_GCC_PLUGINS is not set
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_BLK_DEV is not set
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_PROC_SYSCTL is not set
+# CONFIG_CRYPTO is not set
+CONFIG_RCU_TRACE=y
\ No newline at end of file
new file mode 120000
@@ -0,0 +1 @@
+../linux/linux.hash
\ No newline at end of file
new file mode 100644
@@ -0,0 +1,2 @@
+# Locally calculated
+sha256 a36dd3e82ceb634afded31f2656568f57c4d9c4b399859f298b18116df11c6fe linux-5.15.165.tar.xz
new file mode 100644
@@ -0,0 +1,2 @@
+# Locally calculated
+sha256 f591da9ab90ef3d6b3d173766d0ddff90c4ed7330680897486117df390d83c8f u-boot-2024.07.tar.bz2
new file mode 100755
@@ -0,0 +1,9 @@
+#!/bin/sh
+BOARD_DIR="$(dirname "$0")"
+
+install -m 0644 -D "${BOARD_DIR}"/extlinux.conf "${BINARIES_DIR}"/extlinux/extlinux.conf
+
+# finalize the init script
+INIT_PATH="${TARGET_DIR}/sbin/init"
+sed -i "/^# Clear memory to reduce page fragmentation/d" "${INIT_PATH}"
+sed -i "/^echo 3 > \/proc\/sys\/vm\/drop_caches/d" "${INIT_PATH}"
new file mode 100644
@@ -0,0 +1,31 @@
+STM32F746-DISCO
+===================
+
+This tutorial describes how to use the predefined Buildroot
+configuration for the STM32F746-DISCO evaluation platform.
+
+Building
+--------
+
+ make stm32f746_disco_sd_defconfig
+ make
+
+Flashing
+--------
+
+ ./board/stmicroelectronics/stm32f746-disco/flash_sd.sh output/
+
+It will flash the U-boot bootloader.
+
+Creating SD card
+----------------
+
+Buildroot prepares an "sdcard.img" image in the output/images/ directory,
+ready to be dumped on a SD card. Launch the following command as root:
+
+ dd if=output/images/sdcard.img of=/dev/<your-sd-device>
+
+*** WARNING! This will destroy all the card content. Use with care! ***
+
+For details about the medium image layout and its content, see the
+definition in board/stmicroelectronics/stm32f746-disco/genimage.cfg.
new file mode 100644
@@ -0,0 +1,31 @@
+BR2_arm=y
+BR2_cortex_m7=y
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_15=y
+BR2_GLOBAL_PATCH_DIR="board/stmicroelectronics/stm32f746-disco/patches"
+BR2_DOWNLOAD_FORCE_CHECK_HASHES=y
+BR2_INIT_TINYINIT=y
+BR2_ROOTFS_POST_BUILD_SCRIPT="board/stmicroelectronics/stm32f746-disco/post-build.sh"
+BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
+BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/stmicroelectronics/stm32f746-disco/genimage.cfg"
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.15.165"
+BR2_LINUX_KERNEL_DEFCONFIG="stm32"
+BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/stmicroelectronics/stm32f746-disco/linux.fragment"
+BR2_LINUX_KERNEL_IMAGE_TARGET_CUSTOM=y
+BR2_LINUX_KERNEL_IMAGE_TARGET_NAME="zImage"
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="stm32f746-disco"
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_SIZE="32M"
+# BR2_TARGET_ROOTFS_TAR is not set
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
+BR2_TARGET_UBOOT_CUSTOM_VERSION=y
+BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2024.07"
+BR2_TARGET_UBOOT_BOARD_DEFCONFIG="stm32f746-disco"
+BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
+BR2_PACKAGE_HOST_DOSFSTOOLS=y
+BR2_PACKAGE_HOST_GENIMAGE=y
+BR2_PACKAGE_HOST_MTOOLS=y
+BR2_PACKAGE_HOST_OPENOCD=y