diff mbox series

board/udoo/neo/readme.txt improve

Message ID 20240801191234.9526-1-kilian.zinnecker@mail.de
State Accepted
Headers show
Series board/udoo/neo/readme.txt improve | expand

Commit Message

Kilian Zinnecker Aug. 1, 2024, 7:12 p.m. UTC 
This patch adds more inforamtion to the Udoo Neo's readme, e.g.,
Uart pins and baudrate.

Signed-off-by: Kilian Zinnecker <kilian.zinnecker@mail.de>
---
 board/udoo/neo/readme.txt | 54 ++++++++++++++++++++++++++++++++++++++-
 1 file changed, 53 insertions(+), 1 deletion(-)

Comments

Thomas Petazzoni Aug. 1, 2024, 9:23 p.m. UTC | #1 
On Thu,  1 Aug 2024 21:12:34 +0200
Kilian Zinnecker via buildroot <buildroot@buildroot.org> wrote:

> This patch adds more inforamtion to the Udoo Neo's readme, e.g.,
> Uart pins and baudrate.
> 
> Signed-off-by: Kilian Zinnecker <kilian.zinnecker@mail.de>
> ---
>  board/udoo/neo/readme.txt | 54 ++++++++++++++++++++++++++++++++++++++-
>  1 file changed, 53 insertions(+), 1 deletion(-)

Applied to master with some small improvements to the commit title and
log. Thanks a lot!

Thomas
Peter Korsgaard Sept. 2, 2024, 12:02 p.m. UTC | #2 
>>>>> "Thomas" == Thomas Petazzoni via buildroot <buildroot@buildroot.org> writes:

 > On Thu,  1 Aug 2024 21:12:34 +0200
 > Kilian Zinnecker via buildroot <buildroot@buildroot.org> wrote:

 >> This patch adds more inforamtion to the Udoo Neo's readme, e.g.,
 >> Uart pins and baudrate.
 >> 
 >> Signed-off-by: Kilian Zinnecker <kilian.zinnecker@mail.de>
 >> ---
 >> board/udoo/neo/readme.txt | 54 ++++++++++++++++++++++++++++++++++++++-
 >> 1 file changed, 53 insertions(+), 1 deletion(-)

 > Applied to master with some small improvements to the commit title and
 > log. Thanks a lot!

Committed to 2024.02.x and 2024.05.x, thanks.
diff mbox series

Patch

diff --git a/board/udoo/neo/readme.txt b/board/udoo/neo/readme.txt
index 94ebcc12f2..e9f9fbac1c 100644
--- a/board/udoo/neo/readme.txt
+++ b/board/udoo/neo/readme.txt
@@ -1,12 +1,36 @@ 
 MX6X Udoo Neo board
-
+===================
 http://www.udoo.org/udoo-neo/
 
+Build:
+======
+
 To build a minimal support for these boards:
 
     $ make mx6sx_udoo_neo_defconfig
     $ make
 
+Files created in the output directory:
+======================================
+
+output/images
+.
+├── boot.scr
+├── imx6sx-udoo-neo-basic.dtb
+├── imx6sx-udoo-neo-extended.dtb
+├── imx6sx-udoo-neo-full.dtb
+├── rootfs.ext2
+├── rootfs.ext4 -> rootfs.ext2
+├── rootfs.tar
+├── sdcard.img
+├── SPL
+├── u-boot.bin
+├── u-boot.img
+└── zImage
+
+Creating bootable SD card:
+==========================
+
 Buildroot prepares a bootable "sdcard.img" image in the output/images/
 directory, ready to be dumped on an SD card:
 
@@ -14,3 +38,31 @@  dd if=output/images/sdcard.img of=/dev/<your-microsd-device>
 
 For details about the medium image layout, see the definition in
 board/freescale/common/imx/genimage.cfg.template_no_boot_part_spl.
+
+Booting:
+========
+
+Serial console:
+---------------
+The Udoo Neo features the serial console "UART1" on the pin header "P7". The
+Uart pins are as follows (see board labels):
+
+pin 46: rx
+pin 47: tx
+
+Baudrate for this board is 115200.
+
+Login:
+------
+Enter 'root' as login user, and the prompt is ready.
+
+Documentation:
+==============
+
+documentation link:
+-------------------
+https://www.udoo.org/docs-neo/Introduction/Introduction.html
+
+forum link:
+-----------
+https://www.udoo.org/forum/forums/udoo-neo.39/