diff mbox series

[RFC,2/2] configs/stm32mp135f-dk: new defconfig

Message ID 20240730-master-v1-2-3ca889c14ea4@gmail.com
State Superseded
Headers show
Series Enhance ST common folder and add new defconfig | expand

Commit Message

Raphaël Gallais-Pou July 30, 2024, 1:08 p.m. UTC 
Add new defconfig for STMicroelectronics board STM32MP135F-DK.

STM32MP135F-DK features can be found here:
  https://www.st.com/en/evaluation-tools/stm32mp135f-dk.html

Signed-off-by: Raphael Gallais-Pou <rgallaispou@gmail.com>
---
 .../overlay/boot/extlinux/extlinux.conf            |  4 ++
 board/stmicroelectronics/stm32mp135f-dk/readme.txt | 38 ++++++++++++++
 configs/stm32mp135f_dk_defconfig                   | 59 ++++++++++++++++++++++
 3 files changed, 101 insertions(+)
diff mbox series

Patch

diff --git a/board/stmicroelectronics/stm32mp135f-dk/overlay/boot/extlinux/extlinux.conf b/board/stmicroelectronics/stm32mp135f-dk/overlay/boot/extlinux/extlinux.conf
new file mode 100644
index 0000000000..0cc49d6a56
--- /dev/null
+++ b/board/stmicroelectronics/stm32mp135f-dk/overlay/boot/extlinux/extlinux.conf
@@ -0,0 +1,4 @@ 
+label stm32mp135f-dk-buildroot
+  kernel /boot/zImage
+  devicetree /boot/stm32mp135f-dk.dtb
+  append root=/dev/mmcblk0p4 rootwait
diff --git a/board/stmicroelectronics/stm32mp135f-dk/readme.txt b/board/stmicroelectronics/stm32mp135f-dk/readme.txt
new file mode 100644
index 0000000000..46879f88cf
--- /dev/null
+++ b/board/stmicroelectronics/stm32mp135f-dk/readme.txt
@@ -0,0 +1,38 @@ 
+STM32MP135F Discovery Kit
+
+Intro
+=====
+
+This configuration supports the STM32MP135F Discovery Kit (DK)
+platform:
+
+  https://www.st.com/en/evaluation-tools/stm32mp135f-dk.html
+
+How to build
+============
+
+ $ make stm32mp135f_dk_defconfig
+ $ make
+
+How to write the microSD card
+=============================
+
+Once the build process is finished you will have an image called
+"sdcard.img" in the output/images/ directory.
+
+Copy the bootable "sdcard.img" onto an microSD card with "dd":
+
+  $ sudo dd if=output/images/sdcard.img of=/dev/sdX
+
+Boot the board
+==============
+
+ (1) Insert the microSD card in connector CN15
+
+ (2) Plug a micro-USB cable in connector CN11 and run your serial
+     communication program on /dev/ttyACM0.
+
+ (3) Plug a USB-C cable in CN6 to power-up the board.
+
+ (4) The system will start, with the console on UART, but also visible
+     on the screen.
diff --git a/configs/stm32mp135f_dk_defconfig b/configs/stm32mp135f_dk_defconfig
new file mode 100644
index 0000000000..cc01a2bd40
--- /dev/null
+++ b/configs/stm32mp135f_dk_defconfig
@@ -0,0 +1,59 @@ 
+# Architecture
+BR2_arm=y
+BR2_cortex_a7=y
+
+# Linux headers same as kernel, a 6.9 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_9=y
+
+# System configuration
+BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV=y
+BR2_ROOTFS_OVERLAY="board/stmicroelectronics/stm32mp135f-dk/overlay"
+BR2_ROOTFS_POST_IMAGE_SCRIPT="board/stmicroelectronics/common/stm32mp1xx/post-image.sh"
+
+# Kernel
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.9.8"
+BR2_LINUX_KERNEL_DEFCONFIG="multi_v7"
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="st/stm32mp135f-dk"
+BR2_LINUX_KERNEL_INSTALL_TARGET=y
+
+# Filesystem
+BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
+BR2_PACKAGE_OPTEE_CLIENT=y
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y
+BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
+# BR2_TARGET_ROOTFS_TAR is not set
+
+# Bootloaders
+BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION_VALUE="v2.9"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="stm32mp1"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_FIP=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL32_OPTEE=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_UBOOT_AS_BL33=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_UBOOT_BL33_IMAGE="u-boot-nodtb.bin"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_VARIABLES="STM32MP_SDMMC=1 DTB_FILE_NAME=stm32mp135f-dk.dtb E=0 BL33_CFG=$(BINARIES_DIR)/u-boot.dtb"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_IMAGES="fip.bin *.stm32"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_NEEDS_DTC=y
+BR2_TARGET_OPTEE_OS=y
+BR2_TARGET_OPTEE_OS_PLATFORM="stm32mp1"
+BR2_TARGET_OPTEE_OS_PLATFORM_FLAVOR="135F_DK"
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
+BR2_TARGET_UBOOT_CUSTOM_VERSION=y
+BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2024.07"
+BR2_TARGET_UBOOT_BOARD_DEFCONFIG="stm32mp13"
+BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
+# BR2_TARGET_UBOOT_FORMAT_BIN is not set
+BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
+BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot-nodtb.bin u-boot.dtb"
+BR2_TARGET_UBOOT_CUSTOM_MAKEOPTS="DEVICE_TREE=stm32mp135f-dk"
+
+# Additional tools
+BR2_PACKAGE_HOST_BMAP_TOOLS=y
+BR2_PACKAGE_HOST_GENIMAGE=y