diff mbox series

[v1,1/1] configs/versal_vpk180_defconfig: new defconfig

Message ID 20240619101343.1240550-1-neal.frager@amd.com
State Accepted
Headers show
Series [v1,1/1] configs/versal_vpk180_defconfig: new defconfig | expand

Commit Message

Neal Frager June 19, 2024, 10:13 a.m. UTC 
This patch adds support for Xilinx Versal VPK180 Evaluation Kit.

VPK180 features can be found here:
https://www.xilinx.com/products/boards-and-kits/vpk180.html

Signed-off-by: Neal Frager <neal.frager@amd.com>
---
 DEVELOPERS                      |  1 +
 board/versal/readme.txt         | 16 +++++++-----
 configs/versal_vpk180_defconfig | 44 +++++++++++++++++++++++++++++++++
 3 files changed, 55 insertions(+), 6 deletions(-)
 create mode 100644 configs/versal_vpk180_defconfig

Comments

Brandon Maier June 20, 2024, 2:34 p.m. UTC | #1 
Hi Neal,

On 2024.06.19 11:13, Neal Frager via buildroot wrote:
> This patch adds support for Xilinx Versal VPK180 Evaluation Kit.
> 
> VPK180 features can be found here:
> https://www.xilinx.com/products/boards-and-kits/vpk180.html
> 
> Signed-off-by: Neal Frager <neal.frager@amd.com>

Booted this on a VPK180, everything looks good. Thanks!

Reviewed-by: Brandon Maier <brandon.maier@collins.com>
Tested-by: Brandon Maier <brandon.maier@collins.com>

> ---
>  DEVELOPERS                      |  1 +
>  board/versal/readme.txt         | 16 +++++++-----
>  configs/versal_vpk180_defconfig | 44 +++++++++++++++++++++++++++++++++
>  3 files changed, 55 insertions(+), 6 deletions(-)
>  create mode 100644 configs/versal_vpk180_defconfig
> 
> diff --git a/DEVELOPERS b/DEVELOPERS
> index 8bfd36f1d8..708a02162a 100644
> --- a/DEVELOPERS
> +++ b/DEVELOPERS
> @@ -2341,6 +2341,7 @@ F:	board/zynq/
>  F:	board/zynqmp/
>  F:	boot/xilinx-prebuilt/
>  F:	configs/versal_vck190_defconfig
> +F:	configs/versal_vpk180_defconfig
>  F:	configs/zynq_zc702_defconfig
>  F:	configs/zynq_zc706_defconfig
>  F:	configs/zynqmp_kria_kd240_defconfig
> diff --git a/board/versal/readme.txt b/board/versal/readme.txt
> index 9f234be620..9cf499b35b 100644
> --- a/board/versal/readme.txt
> +++ b/board/versal/readme.txt
> @@ -1,16 +1,20 @@
> +This document describes the Buildroot support for the following
> +Xilinx Versal boards:
> +
>  ******************************************
> -Xilinx VCK190 board - Versal
> +Supported Versal Boards:
> +Xilinx VCK190 board
> +Xilinx VPK180 board
>  ******************************************
>  
> -This document describes the Buildroot support for the VCK190
> -board by Xilinx, based on Versal.  It has been tested with the 
> -VCK190 production board.
> -
> -Evaluation board features can be found here with the link below.
> +Evaluation board features can be found here with the links below.
>  
>  VCK190:
>  https://www.xilinx.com/products/boards-and-kits/vck190.html
>  
> +VPK180:
> +https://www.xilinx.com/products/boards-and-kits/vpk180.html
> +
>  
>  How to build it
>  ===============
> diff --git a/configs/versal_vpk180_defconfig b/configs/versal_vpk180_defconfig
> new file mode 100644
> index 0000000000..253a6d2cff
> --- /dev/null
> +++ b/configs/versal_vpk180_defconfig
> @@ -0,0 +1,44 @@
> +BR2_aarch64=y
> +BR2_cortex_a72=y
> +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_6=y
> +BR2_ROOTFS_POST_BUILD_SCRIPT="board/versal/post-build.sh"
> +BR2_ROOTFS_POST_IMAGE_SCRIPT="board/versal/post-image.sh"
> +BR2_ROOTFS_POST_SCRIPT_ARGS="ttyAMA0,115200 mmcblk0p2"
> +BR2_LINUX_KERNEL=y
> +BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
> +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,linux-xlnx,xlnx_rebase_v6.6_LTS_2024.1)/xlnx_rebase_v6.6_LTS_2024.1.tar.gz"
> +BR2_LINUX_KERNEL_DEFCONFIG="xilinx"
> +BR2_LINUX_KERNEL_DTS_SUPPORT=y
> +BR2_LINUX_KERNEL_INTREE_DTS_NAME="xilinx/versal-vpk180-revA"
> +BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
> +BR2_TARGET_ROOTFS_EXT2=y
> +BR2_TARGET_ROOTFS_EXT2_4=y
> +# BR2_TARGET_ROOTFS_TAR is not set
> +BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
> +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_TARBALL=y
> +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,arm-trusted-firmware,xlnx_rebase_v2.10_2024.1)/xlnx_rebase_v2.10_2024.1.tar.gz"
> +BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="versal"
> +BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31_UBOOT=y
> +BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
> +BR2_TARGET_UBOOT_NEEDS_ATF_BL31_ELF=y
> +BR2_TARGET_UBOOT=y
> +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
> +BR2_TARGET_UBOOT_CUSTOM_TARBALL=y
> +BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,u-boot-xlnx,xlnx_rebase_v2024.01_2024.1)/xlnx_rebase_v2024.01_2024.1.tar.gz"
> +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="xilinx_versal_virt"
> +BR2_TARGET_UBOOT_CUSTOM_MAKEOPTS="DEVICE_TREE=versal-vpk180-revA"
> +BR2_TARGET_UBOOT_NEEDS_DTC=y
> +BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
> +BR2_TARGET_UBOOT_NEEDS_GNUTLS=y
> +BR2_TARGET_UBOOT_FORMAT_REMAKE_ELF=y
> +BR2_TARGET_UBOOT_FORMAT_DTB=y
> +BR2_TARGET_XILINX_PREBUILT=y
> +BR2_TARGET_XILINX_PREBUILT_VERSION="xilinx_v2024.1"
> +BR2_TARGET_XILINX_PREBUILT_BOARD="vpk180"
> +BR2_TARGET_XILINX_PREBUILT_VERSAL=y
> +BR2_PACKAGE_HOST_DOSFSTOOLS=y
> +BR2_PACKAGE_HOST_GENIMAGE=y
> +BR2_PACKAGE_HOST_MTOOLS=y
> +BR2_PACKAGE_HOST_BOOTGEN=y
> +BR2_DOWNLOAD_FORCE_CHECK_HASHES=y
> +BR2_GLOBAL_PATCH_DIR="board/xilinx/patches"
> -- 
> 2.25.1
> 
> _______________________________________________
> buildroot mailing list
> buildroot@buildroot.org
> https://lists.buildroot.org/mailman/listinfo/buildroot
Luca Ceresoli June 28, 2024, 7:34 a.m. UTC | #2 
On Wed, 19 Jun 2024 11:13:43 +0100
Neal Frager <neal.frager@amd.com> wrote:

> This patch adds support for Xilinx Versal VPK180 Evaluation Kit.
> 
> VPK180 features can be found here:
> https://www.xilinx.com/products/boards-and-kits/vpk180.html
> 
> Signed-off-by: Neal Frager <neal.frager@amd.com>

Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Romain Naour July 14, 2024, 9:53 p.m. UTC | #3 
Hello Neal, All,

Le 28/06/2024 à 09:34, Luca Ceresoli via buildroot a écrit :
> On Wed, 19 Jun 2024 11:13:43 +0100
> Neal Frager <neal.frager@amd.com> wrote:
> 
>> This patch adds support for Xilinx Versal VPK180 Evaluation Kit.
>>
>> VPK180 features can be found here:
>> https://www.xilinx.com/products/boards-and-kits/vpk180.html
>>
>> Signed-off-by: Neal Frager <neal.frager@amd.com>
> 
> Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
> 

Applied to master, thanks.

Best regards,
Romain
diff mbox series

Patch

diff --git a/DEVELOPERS b/DEVELOPERS
index 8bfd36f1d8..708a02162a 100644
--- a/DEVELOPERS
+++ b/DEVELOPERS
@@ -2341,6 +2341,7 @@  F:	board/zynq/
 F:	board/zynqmp/
 F:	boot/xilinx-prebuilt/
 F:	configs/versal_vck190_defconfig
+F:	configs/versal_vpk180_defconfig
 F:	configs/zynq_zc702_defconfig
 F:	configs/zynq_zc706_defconfig
 F:	configs/zynqmp_kria_kd240_defconfig
diff --git a/board/versal/readme.txt b/board/versal/readme.txt
index 9f234be620..9cf499b35b 100644
--- a/board/versal/readme.txt
+++ b/board/versal/readme.txt
@@ -1,16 +1,20 @@ 
+This document describes the Buildroot support for the following
+Xilinx Versal boards:
+
 ******************************************
-Xilinx VCK190 board - Versal
+Supported Versal Boards:
+Xilinx VCK190 board
+Xilinx VPK180 board
 ******************************************
 
-This document describes the Buildroot support for the VCK190
-board by Xilinx, based on Versal.  It has been tested with the 
-VCK190 production board.
-
-Evaluation board features can be found here with the link below.
+Evaluation board features can be found here with the links below.
 
 VCK190:
 https://www.xilinx.com/products/boards-and-kits/vck190.html
 
+VPK180:
+https://www.xilinx.com/products/boards-and-kits/vpk180.html
+
 
 How to build it
 ===============
diff --git a/configs/versal_vpk180_defconfig b/configs/versal_vpk180_defconfig
new file mode 100644
index 0000000000..253a6d2cff
--- /dev/null
+++ b/configs/versal_vpk180_defconfig
@@ -0,0 +1,44 @@ 
+BR2_aarch64=y
+BR2_cortex_a72=y
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_6=y
+BR2_ROOTFS_POST_BUILD_SCRIPT="board/versal/post-build.sh"
+BR2_ROOTFS_POST_IMAGE_SCRIPT="board/versal/post-image.sh"
+BR2_ROOTFS_POST_SCRIPT_ARGS="ttyAMA0,115200 mmcblk0p2"
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,linux-xlnx,xlnx_rebase_v6.6_LTS_2024.1)/xlnx_rebase_v6.6_LTS_2024.1.tar.gz"
+BR2_LINUX_KERNEL_DEFCONFIG="xilinx"
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="xilinx/versal-vpk180-revA"
+BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y
+# BR2_TARGET_ROOTFS_TAR is not set
+BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_TARBALL=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,arm-trusted-firmware,xlnx_rebase_v2.10_2024.1)/xlnx_rebase_v2.10_2024.1.tar.gz"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="versal"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31_UBOOT=y
+BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
+BR2_TARGET_UBOOT_NEEDS_ATF_BL31_ELF=y
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
+BR2_TARGET_UBOOT_CUSTOM_TARBALL=y
+BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,u-boot-xlnx,xlnx_rebase_v2024.01_2024.1)/xlnx_rebase_v2024.01_2024.1.tar.gz"
+BR2_TARGET_UBOOT_BOARD_DEFCONFIG="xilinx_versal_virt"
+BR2_TARGET_UBOOT_CUSTOM_MAKEOPTS="DEVICE_TREE=versal-vpk180-revA"
+BR2_TARGET_UBOOT_NEEDS_DTC=y
+BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
+BR2_TARGET_UBOOT_NEEDS_GNUTLS=y
+BR2_TARGET_UBOOT_FORMAT_REMAKE_ELF=y
+BR2_TARGET_UBOOT_FORMAT_DTB=y
+BR2_TARGET_XILINX_PREBUILT=y
+BR2_TARGET_XILINX_PREBUILT_VERSION="xilinx_v2024.1"
+BR2_TARGET_XILINX_PREBUILT_BOARD="vpk180"
+BR2_TARGET_XILINX_PREBUILT_VERSAL=y
+BR2_PACKAGE_HOST_DOSFSTOOLS=y
+BR2_PACKAGE_HOST_GENIMAGE=y
+BR2_PACKAGE_HOST_MTOOLS=y
+BR2_PACKAGE_HOST_BOOTGEN=y
+BR2_DOWNLOAD_FORCE_CHECK_HASHES=y
+BR2_GLOBAL_PATCH_DIR="board/xilinx/patches"